Analog Devices Inc.
Bild kan vara representation.
Se specifikationer för produktinformation.
ADM211ARZ
Visa detalj Datablad

ADM211ARZ

Product Overview

  • Category: Analog Devices IC
  • Use: RS-232 Transceiver
  • Characteristics: High-speed, low-power, 3.3V CMOS RS-232 transceiver
  • Package: SOIC (Small Outline Integrated Circuit)
  • Essence: Provides a bidirectional interface between a microcontroller or UART and an RS-232 communication channel
  • Packaging/Quantity: Available in tape and reel packaging, with 250 units per reel

Specifications

  • Supply Voltage: 3.0V to 5.5V
  • Data Rate: Up to 230 kbps
  • Operating Temperature Range: -40°C to +85°C
  • Number of Channels: 1
  • Interface Standards: RS-232

Detailed Pin Configuration

The ADM211ARZ has a total of 16 pins. The pin configuration is as follows:

  1. VCC: Supply voltage input
  2. GND: Ground reference
  3. T1OUT: Transmit data output
  4. R1IN: Receive data input
  5. R1OUT: Receive data output
  6. T1IN: Transmit data input
  7. NC: No connection
  8. SHDN: Shutdown control input
  9. C1OUT: Capacitor 1 output
  10. C1IN: Capacitor 1 input
  11. C2OUT: Capacitor 2 output
  12. C2IN: Capacitor 2 input
  13. R2OUT: Receiver 2 output
  14. T2IN: Transmitter 2 input
  15. T2OUT: Transmitter 2 output
  16. R2IN: Receiver 2 input

Functional Features

  • Provides ESD protection for RS-232 I/O pins
  • Operates with a single 3.3V power supply
  • Supports data rates up to 230 kbps
  • Low power consumption in shutdown mode
  • Allows direct interface to microcontrollers and UARTs

Advantages and Disadvantages

Advantages

  • High-speed data transmission
  • Low power consumption
  • ESD protection for I/O pins
  • Wide operating temperature range

Disadvantages

  • Limited to RS-232 interface standard
  • Single-channel configuration

Working Principles

The ADM211ARZ is designed to provide a bidirectional interface between a microcontroller or UART and an RS-232 communication channel. It uses a combination of voltage level shifting, charge pump voltage conversion, and line driver/receiver circuits to achieve this interface. The transceiver operates with a single 3.3V power supply and supports data rates up to 230 kbps.

Detailed Application Field Plans

The ADM211ARZ is commonly used in various applications that require RS-232 communication, such as:

  1. Industrial automation systems
  2. Data acquisition systems
  3. Point-of-sale terminals
  4. Networking equipment
  5. Medical devices

Detailed and Complete Alternative Models

Some alternative models to the ADM211ARZ include:

  1. MAX3232EIPWR: Maxim Integrated RS-232 Transceiver
  2. SP3232EEN-L/TR: Exar Corporation RS-232 Transceiver
  3. ST3232EBDR: STMicroelectronics RS-232 Transceiver
  4. LTC1380CG#PBF: Linear Technology RS-232 Transceiver
  5. SN65HVD10DR: Texas Instruments RS-232 Transceiver

These alternative models offer similar functionality and can be considered as substitutes for the ADM211ARZ depending on specific requirements.

Word count: 346 words

Lista 10 Vanliga frågor och svar relaterade till tillämpningen av ADM211ARZ i tekniska lösningar

Sure! Here are 10 common questions and answers related to the application of ADM211ARZ in technical solutions:

  1. Q: What is ADM211ARZ? A: ADM211ARZ is a dual RS-232 line driver/receiver IC that converts TTL/CMOS logic levels to RS-232 voltage levels.

  2. Q: What is the operating voltage range of ADM211ARZ? A: The operating voltage range of ADM211ARZ is typically between 4.5V and 5.5V.

  3. Q: Can ADM211ARZ be used for bidirectional communication? A: No, ADM211ARZ is a unidirectional device and can only be used for one-way communication.

  4. Q: What is the maximum data rate supported by ADM211ARZ? A: ADM211ARZ supports a maximum data rate of 120 kbps.

  5. Q: Does ADM211ARZ require external capacitors? A: Yes, ADM211ARZ requires external capacitors for charge pump operation. Refer to the datasheet for specific values.

  6. Q: Can ADM211ARZ be used with both 3.3V and 5V logic levels? A: Yes, ADM211ARZ is compatible with both 3.3V and 5V logic levels.

  7. Q: Is ADM211ARZ suitable for long-distance communication? A: Yes, ADM211ARZ is designed for RS-232 communication over short to medium distances (up to a few meters).

  8. Q: Can ADM211ARZ be used in industrial environments? A: Yes, ADM211ARZ is suitable for use in industrial environments as it has a wide operating temperature range and is ESD protected.

  9. Q: Does ADM211ARZ require external power supply decoupling capacitors? A: Yes, it is recommended to use external power supply decoupling capacitors for stable operation of ADM211ARZ.

  10. Q: Are there any application notes or reference designs available for ADM211ARZ? A: Yes, Analog Devices provides application notes and reference designs on their website that can help with the implementation of ADM211ARZ in various technical solutions.

Please note that these answers are general and may vary depending on specific requirements and use cases. It is always recommended to refer to the datasheet and consult with the manufacturer for accurate and detailed information.