Cypress Semiconductor Corp
Bild kan vara representation.
Se specifikationer för produktinformation.
S25FL116K0XMFI011
Visa detalj Datablad

S25FL116K0XMFI011

Product Overview

Category

The S25FL116K0XMFI011 belongs to the category of flash memory devices.

Use

This product is primarily used for data storage and retrieval in various electronic devices, such as computers, smartphones, tablets, and embedded systems.

Characteristics

  • High-speed data transfer capabilities
  • Non-volatile memory technology
  • Compact form factor
  • Reliable and durable design
  • Wide operating temperature range

Package

The S25FL116K0XMFI011 comes in a small surface-mount package, which allows for easy integration into circuit boards and other electronic assemblies.

Essence

The essence of this product lies in its ability to store and retrieve digital information quickly and reliably, making it an essential component in modern electronic devices.

Packaging/Quantity

Typically, the S25FL116K0XMFI011 is packaged in reels or trays, with each reel or tray containing a specific quantity of units. The exact packaging and quantity may vary depending on the manufacturer's specifications.

Specifications

  • Memory Capacity: 16 megabits (2 megabytes)
  • Interface: Serial Peripheral Interface (SPI)
  • Operating Voltage: 2.7V - 3.6V
  • Operating Temperature Range: -40°C to +85°C
  • Erase/Program Cycle Endurance: 100,000 cycles
  • Data Retention: Up to 20 years

Detailed Pin Configuration

The S25FL116K0XMFI011 has the following pin configuration:

  1. Chip Select (/CS)
  2. Serial Clock (SCLK)
  3. Serial Data Input (SI)
  4. Serial Data Output (SO)
  5. Write Protect (/WP)
  6. Hold (/HOLD)
  7. Ground (GND)
  8. Power Supply (VCC)

Functional Features

  • High-speed read and write operations
  • Sector erase and program operations
  • Protection mechanisms against accidental data modification
  • Low power consumption in standby mode
  • Flexible addressing modes for efficient data access

Advantages and Disadvantages

Advantages

  • Fast data transfer speeds
  • Compact size for easy integration
  • Reliable and durable design
  • Wide operating temperature range
  • Low power consumption

Disadvantages

  • Limited storage capacity compared to other flash memory options
  • Relatively higher cost per unit compared to traditional hard drives

Working Principles

The S25FL116K0XMFI011 utilizes a combination of electronic circuits and non-volatile memory cells to store and retrieve digital information. It employs the Serial Peripheral Interface (SPI) protocol for communication with the host device.

Detailed Application Field Plans

The S25FL116K0XMFI011 is widely used in various applications, including but not limited to: - Computer systems - Mobile devices - Automotive electronics - Industrial control systems - Consumer electronics

Detailed and Complete Alternative Models

  1. S25FL032P0XNFI001
  2. S25FL064L0XNFI001
  3. S25FL128P0XNFI001
  4. S25FL256S0XNFI001
  5. S25FL512S0XNFI001

These alternative models offer similar functionality and characteristics to the S25FL116K0XMFI011, but with varying storage capacities and specifications.

In conclusion, the S25FL116K0XMFI011 flash memory device provides high-speed data storage and retrieval capabilities in a compact and reliable package. Its wide range of applications and flexible features make it a popular choice in the electronics industry.

Lista 10 Vanliga frågor och svar relaterade till tillämpningen av S25FL116K0XMFI011 i tekniska lösningar

Sure! Here are 10 common questions and answers related to the application of S25FL116K0XMFI011 in technical solutions:

  1. Q: What is the S25FL116K0XMFI011? A: The S25FL116K0XMFI011 is a serial NOR flash memory chip manufactured by Cypress Semiconductor. It offers high-performance, non-volatile storage for various applications.

  2. Q: What is the capacity of the S25FL116K0XMFI011? A: The S25FL116K0XMFI011 has a capacity of 16 megabits (Mb), which is equivalent to 2 megabytes (MB) of data storage.

  3. Q: What is the interface used to communicate with the S25FL116K0XMFI011? A: The S25FL116K0XMFI011 uses a Serial Peripheral Interface (SPI) for communication with the host microcontroller or system.

  4. Q: What are some typical applications of the S25FL116K0XMFI011? A: The S25FL116K0XMFI011 is commonly used in applications such as automotive systems, industrial control, consumer electronics, and IoT devices that require reliable and fast non-volatile memory storage.

  5. Q: What is the operating voltage range of the S25FL116K0XMFI011? A: The S25FL116K0XMFI011 operates within a voltage range of 2.7V to 3.6V.

  6. Q: What is the maximum clock frequency supported by the S25FL116K0XMFI011? A: The S25FL116K0XMFI011 supports a maximum clock frequency of 104 MHz, allowing for high-speed data transfer.

  7. Q: Does the S25FL116K0XMFI011 support sector erase and block erase operations? A: Yes, the S25FL116K0XMFI011 supports both sector erase (4KB) and block erase (64KB) operations, providing flexibility in data management.

  8. Q: What is the typical endurance of the S25FL116K0XMFI011? A: The S25FL116K0XMFI011 has a typical endurance of 100,000 program/erase cycles per sector.

  9. Q: Does the S25FL116K0XMFI011 have any security features? A: Yes, the S25FL116K0XMFI011 offers hardware-based security features such as a unique device ID, one-time programmable (OTP) area, and software write protection.

  10. Q: Is the S25FL116K0XMFI011 RoHS compliant? A: Yes, the S25FL116K0XMFI011 is RoHS (Restriction of Hazardous Substances) compliant, ensuring it meets environmental regulations.

Please note that the answers provided here are general and may vary depending on specific product revisions or datasheet specifications. It's always recommended to refer to the official documentation for accurate and up-to-date information.