Cypress Semiconductor Corp
Bild kan vara representation.
Se specifikationer för produktinformation.
S25FL128SDPMFV013
Visa detalj Datablad

S25FL128SDPMFV013

Product Overview

  • Category: Flash Memory
  • Use: Data storage and retrieval in electronic devices
  • Characteristics:
    • High capacity
    • Fast read and write speeds
    • Non-volatile memory
    • Low power consumption
  • Package: Small outline integrated circuit (SOIC)
  • Essence: Provides reliable and efficient data storage solution for various electronic devices
  • Packaging/Quantity: Available in reels, with a quantity of 2500 units per reel

Specifications

  • Memory Type: Serial NOR Flash
  • Capacity: 128 Megabits (16 Megabytes)
  • Interface: Serial Peripheral Interface (SPI)
  • Operating Voltage: 2.7V to 3.6V
  • Operating Temperature Range: -40°C to +85°C
  • Data Retention: Up to 20 years
  • Erase/Program Cycles: Minimum 100,000 cycles

Detailed Pin Configuration

The S25FL128SDPMFV013 has a total of 8 pins:

  1. Chip Select (/CS)
  2. Serial Clock (SCLK)
  3. Serial Data Input (SI)
  4. Serial Data Output (SO)
  5. Write Protect (/WP)
  6. Hold (/HOLD)
  7. Ground (GND)
  8. Power Supply (VCC)

Functional Features

  • High-speed data transfer using SPI interface
  • Sector erase and byte program operations
  • Software and hardware protection mechanisms
  • Efficient power management features
  • Advanced security features like unique device identification and secure boot

Advantages

  • Large storage capacity for storing extensive data
  • Fast read and write speeds for quick data access
  • Low power consumption, suitable for battery-powered devices
  • Reliable and durable non-volatile memory
  • Secure data storage with advanced security features

Disadvantages

  • Limited erase and program cycles, may require careful management in certain applications
  • Relatively higher cost compared to other memory technologies

Working Principles

The S25FL128SDPMFV013 utilizes the Serial Peripheral Interface (SPI) for communication with the host device. It stores data in non-volatile memory cells, which retain information even when power is disconnected. The memory can be erased and programmed at the sector or byte level, allowing flexible data manipulation. The chip's internal circuitry manages data transfer, power consumption, and security features.

Detailed Application Field Plans

The S25FL128SDPMFV013 is widely used in various electronic devices that require reliable and high-capacity data storage. Some common application fields include:

  1. Consumer Electronics: Smartphones, tablets, digital cameras, gaming consoles
  2. Automotive: Infotainment systems, instrument clusters, navigation systems
  3. Industrial: Embedded systems, control units, data loggers
  4. Networking: Routers, switches, network storage devices
  5. Medical: Patient monitoring devices, medical imaging equipment

Detailed and Complete Alternative Models

  1. S25FL064L - 64 Megabit Serial NOR Flash Memory
  2. S25FL256S - 256 Megabit Serial NOR Flash Memory
  3. S25FL512S - 512 Megabit Serial NOR Flash Memory
  4. S25FL204K - 4 Megabit Serial NOR Flash Memory
  5. S25FL116K - 16 Megabit Serial NOR Flash Memory

(Note: This list is not exhaustive and there are several other alternative models available in the market.)

Word count: 445 words

Lista 10 Vanliga frågor och svar relaterade till tillämpningen av S25FL128SDPMFV013 i tekniska lösningar

Sure! Here are 10 common questions and answers related to the application of S25FL128SDPMFV013 in technical solutions:

  1. Q: What is the S25FL128SDPMFV013? A: The S25FL128SDPMFV013 is a serial NOR flash memory chip manufactured by Cypress Semiconductor. It offers 128 megabits (16 megabytes) of non-volatile storage.

  2. Q: What are some typical applications for the S25FL128SDPMFV013? A: The S25FL128SDPMFV013 is commonly used in various embedded systems, such as automotive electronics, industrial control systems, consumer electronics, and networking equipment.

  3. Q: What is the interface used to communicate with the S25FL128SDPMFV013? A: The S25FL128SDPMFV013 uses a Serial Peripheral Interface (SPI) for communication, which is a widely supported standard in the industry.

  4. Q: What is the operating voltage range of the S25FL128SDPMFV013? A: The S25FL128SDPMFV013 operates at a voltage range of 2.7V to 3.6V, making it compatible with most common microcontrollers and digital logic circuits.

  5. Q: What is the maximum data transfer rate supported by the S25FL128SDPMFV013? A: The S25FL128SDPMFV013 supports a maximum clock frequency of 104 MHz, allowing for fast data transfers between the flash memory and the host device.

  6. Q: Does the S25FL128SDPMFV013 support hardware or software write protection? A: Yes, the S25FL128SDPMFV013 provides both hardware and software write protection features, allowing you to protect specific memory regions or the entire chip from accidental writes.

  7. Q: Can the S25FL128SDPMFV013 be used for code execution? A: Yes, the S25FL128SDPMFV013 can be used for executing code directly from the flash memory, making it suitable for storing firmware, bootloaders, and other executable code.

  8. Q: Does the S25FL128SDPMFV013 support over-the-air (OTA) updates? A: Yes, the S25FL128SDPMFV013 can be used in OTA update scenarios, where new firmware or software updates can be downloaded and stored in the flash memory.

  9. Q: What is the endurance of the S25FL128SDPMFV013? A: The S25FL128SDPMFV013 has a high endurance rating, typically supporting up to 100,000 program/erase cycles per sector, ensuring reliable and long-lasting operation.

  10. Q: Are there any development tools or software libraries available for working with the S25FL128SDPMFV013? A: Yes, Cypress Semiconductor provides various development tools, software libraries, and documentation to assist developers in integrating and programming the S25FL128SDPMFV013 into their technical solutions.

Please note that the answers provided here are general and may vary depending on specific implementation details and requirements.