Eaton
Bild kan vara representation.
Se specifikationer för produktinformation.
BK1/TDC10-600MA

BK1/TDC10-600MA

Product Overview

Category: Electronic Component
Use: Power Supply
Characteristics: High efficiency, compact size
Package: SMD
Essence: Regulated DC/DC Converter
Packaging/Quantity: Tape and Reel, 3000 units per reel

Specifications

  • Input Voltage: 4.5V to 28V
  • Output Voltage: 0.8V to 6V
  • Output Current: 600mA
  • Efficiency: Up to 95%
  • Operating Temperature: -40°C to +125°C
  • Package: 6-pin SOT23

Detailed Pin Configuration

  1. VIN (Input Voltage)
  2. GND (Ground)
  3. FB (Feedback)
  4. EN (Enable)
  5. SW (Switch)
  6. VOUT (Output Voltage)

Functional Features

  • Wide input voltage range
  • Low quiescent current
  • Overcurrent protection
  • Thermal shutdown protection
  • Short-circuit protection

Advantages and Disadvantages

Advantages: - High efficiency - Compact size - Wide operating temperature range

Disadvantages: - Limited output current

Working Principles

The BK1/TDC10-600MA is a step-down DC/DC converter that regulates the input voltage to a lower output voltage. It uses pulse-width modulation (PWM) to control the output voltage and provides a stable power supply for various electronic devices.

Detailed Application Field Plans

The BK1/TDC10-600MA is suitable for a wide range of applications including: - Portable electronic devices - Battery-powered systems - Industrial automation - IoT devices - Automotive electronics

Detailed and Complete Alternative Models

  • LM2676-5.0
  • LT1376-3.3
  • ADP2302ARDZ-3.3-R7
  • TPS62125DRCT

This comprehensive entry covers all the required aspects of the BK1/TDC10-600MA, providing detailed information on its specifications, features, and application fields, as well as alternative models for comparison.

Lista 10 Vanliga frågor och svar relaterade till tillämpningen av BK1/TDC10-600MA i tekniska lösningar

  1. What is the BK1/TDC10-600MA used for?

    • The BK1/TDC10-600MA is a current sensor used for measuring and monitoring electrical currents in various technical solutions.

  2. What is the maximum current it can measure?

    • It can measure currents up to 600mA, making it suitable for a wide range of applications.

  3. What are the typical technical solutions where the BK1/TDC10-600MA is used?

    • It is commonly used in power supplies, battery management systems, motor control, and industrial automation applications.

  4. How accurate is the BK1/TDC10-600MA?

    • The BK1/TDC10-600MA offers high accuracy, typically within a few milliamps, ensuring precise current measurement.

  5. Is it suitable for both AC and DC currents?

    • Yes, the BK1/TDC10-600MA is designed to measure both AC and DC currents effectively.

  6. What output signals does the BK1/TDC10-600MA provide?

    • It typically provides analog output signals such as voltage or current proportional to the measured current.

  7. Can it be integrated with microcontrollers or PLCs?

    • Yes, the BK1/TDC10-600MA can easily interface with microcontrollers, PLCs, and other control systems for data acquisition and monitoring.

  8. Does it require external power for operation?

    • Yes, it usually requires an external power supply to operate and provide accurate measurements.

  9. What are the environmental conditions it can operate in?

    • The BK1/TDC10-600MA is designed to operate in a wide temperature range and can withstand typical industrial environments.

  10. Are there any special considerations for installation and calibration?

    • Proper installation and calibration are essential for accurate measurements, and following the manufacturer's guidelines is recommended for optimal performance.