Linear Technology/Analog Devices
Bild kan vara representation.
Se specifikationer för produktinformation.
LTC3528BEDDB-2#TRPBF
Visa detalj Datablad

LTC3528BEDDB-2#TRPBF

Product Overview

Category

The LTC3528BEDDB-2#TRPBF belongs to the category of integrated circuits (ICs).

Use

This product is commonly used in various electronic devices and systems for voltage regulation and power management purposes.

Characteristics

  • Integrated circuit
  • Voltage regulation
  • Power management

Package

The LTC3528BEDDB-2#TRPBF is available in a small form factor package, typically a 6-pin DFN (Dual Flat No-Lead) package.

Essence

The essence of LTC3528BEDDB-2#TRPBF lies in its ability to efficiently regulate voltage and manage power in electronic devices.

Packaging/Quantity

This product is usually packaged in reels or tubes, with a typical quantity of 2500 units per reel/tube.

Specifications

The LTC3528BEDDB-2#TRPBF has the following specifications:

  • Input Voltage Range: 2.5V to 5.5V
  • Output Voltage Range: 1.8V to 5.25V
  • Maximum Output Current: 600mA
  • Switching Frequency: 1.2MHz
  • Operating Temperature Range: -40°C to 85°C

Detailed Pin Configuration

The LTC3528BEDDB-2#TRPBF has the following pin configuration:

  1. VIN: Input voltage pin
  2. GND: Ground pin
  3. SW: Switching pin
  4. FB: Feedback pin
  5. EN: Enable pin
  6. VOUT: Output voltage pin

Functional Features

The LTC3528BEDDB-2#TRPBF offers the following functional features:

  • High efficiency voltage regulation
  • Low quiescent current
  • Overcurrent protection
  • Thermal shutdown protection
  • Soft-start capability
  • Adjustable output voltage

Advantages and Disadvantages

Advantages

  • High efficiency power management
  • Compact form factor
  • Wide input voltage range
  • Adjustable output voltage

Disadvantages

  • Limited maximum output current (600mA)
  • Relatively high switching frequency (1.2MHz)

Working Principles

The LTC3528BEDDB-2#TRPBF operates based on a switching regulator topology. It uses an internal oscillator to control the switching of the internal power MOSFET, which regulates the output voltage based on the feedback received from the FB pin.

Detailed Application Field Plans

The LTC3528BEDDB-2#TRPBF finds applications in various electronic devices and systems, including but not limited to:

  1. Battery-powered devices
  2. Portable electronic devices
  3. IoT (Internet of Things) devices
  4. Wearable devices
  5. Embedded systems

Detailed and Complete Alternative Models

Some alternative models that can be considered as alternatives to LTC3528BEDDB-2#TRPBF are:

  1. LT1763 - Low Dropout Regulator
  2. LM2576 - Simple Switcher® 3A Step-Down Voltage Regulator
  3. TPS62130 - 3V to 17V Input, 3A Step-Down Converter

These alternative models offer similar functionality and can be used depending on specific requirements and design constraints.

In conclusion, the LTC3528BEDDB-2#TRPBF is an integrated circuit used for voltage regulation and power management in various electronic devices. It offers high efficiency, compact size, and adjustable output voltage. However, it has limitations in terms of maximum output current and switching frequency. Its working principle is based on a switching regulator topology, and it finds applications in battery-powered devices, portable electronics, IoT devices, wearable devices, and embedded systems. Alternative models such as LT1763, LM2576, and TPS62130 can be considered depending on specific needs.

Lista 10 Vanliga frågor och svar relaterade till tillämpningen av LTC3528BEDDB-2#TRPBF i tekniska lösningar

Sure! Here are 10 common questions and answers related to the application of LTC3528BEDDB-2#TRPBF in technical solutions:

  1. Q: What is the LTC3528BEDDB-2#TRPBF? A: The LTC3528BEDDB-2#TRPBF is a high-efficiency synchronous buck regulator IC designed for use in various power management applications.

  2. Q: What is the input voltage range of LTC3528BEDDB-2#TRPBF? A: The input voltage range of LTC3528BEDDB-2#TRPBF is typically between 2.5V and 5.5V.

  3. Q: What is the output voltage range of LTC3528BEDDB-2#TRPBF? A: The output voltage range of LTC3528BEDDB-2#TRPBF can be adjusted from 0.6V to VIN.

  4. Q: What is the maximum output current of LTC3528BEDDB-2#TRPBF? A: The maximum output current of LTC3528BEDDB-2#TRPBF is typically 600mA.

  5. Q: Can LTC3528BEDDB-2#TRPBF operate in a wide temperature range? A: Yes, LTC3528BEDDB-2#TRPBF is designed to operate in a temperature range of -40°C to 125°C.

  6. Q: Does LTC3528BEDDB-2#TRPBF have built-in protection features? A: Yes, LTC3528BEDDB-2#TRPBF includes features like overcurrent protection, thermal shutdown, and undervoltage lockout.

  7. Q: What type of package does LTC3528BEDDB-2#TRPBF come in? A: LTC3528BEDDB-2#TRPBF is available in a 6-pin DFN package.

  8. Q: Can LTC3528BEDDB-2#TRPBF be used in battery-powered applications? A: Yes, LTC3528BEDDB-2#TRPBF is suitable for battery-powered applications due to its low quiescent current and high efficiency.

  9. Q: What are the typical applications of LTC3528BEDDB-2#TRPBF? A: LTC3528BEDDB-2#TRPBF can be used in portable devices, IoT applications, USB-powered devices, and other low-power systems.

  10. Q: Is there any evaluation board or reference design available for LTC3528BEDDB-2#TRPBF? A: Yes, Linear Technology (now part of Analog Devices) provides an evaluation board and reference design for LTC3528BEDDB-2#TRPBF, which can help users quickly prototype their designs.

Please note that the answers provided here are general and may vary depending on specific application requirements. It's always recommended to refer to the datasheet and application notes for detailed information.