Linear Technology/Analog Devices
Bild kan vara representation.
Se specifikationer för produktinformation.
LTC3805IDD#TRPBF
Visa detalj Datablad

LTC3805IDD#TRPBF

Product Overview

  • Category: Integrated Circuit (IC)
  • Use: Power Management
  • Characteristics: High Efficiency, Low Quiescent Current
  • Package: 8-Lead DFN (Dual Flat No-Lead)
  • Essence: Voltage Mode Synchronous Step-Down DC/DC Controller
  • Packaging/Quantity: Tape and Reel, 2500 units per reel

Specifications

  • Input Voltage Range: 4.5V to 36V
  • Output Voltage Range: 0.8V to VIN
  • Switching Frequency: Adjustable up to 2MHz
  • Maximum Duty Cycle: 90%
  • Quiescent Current: 20µA
  • Operating Temperature Range: -40°C to 125°C

Detailed Pin Configuration

  1. VIN: Input Voltage
  2. GND: Ground
  3. FB: Feedback Pin
  4. SS: Soft-Start Pin
  5. SYNC: Synchronization Pin
  6. VCC: Supply Voltage
  7. SW: Switch Node
  8. PGND: Power Ground

Functional Features

  • Voltage Mode Control with Adjustable Frequency
  • Synchronous Rectification for High Efficiency
  • Programmable Soft-Start
  • Power Good Output
  • Overvoltage Protection
  • Undervoltage Lockout
  • Thermal Shutdown

Advantages and Disadvantages

Advantages: - High efficiency due to synchronous rectification - Wide input voltage range allows for versatile applications - Adjustable switching frequency for optimization - Programmable soft-start for controlled power-up - Power good output for system monitoring - Comprehensive protection features enhance reliability

Disadvantages: - Limited maximum duty cycle of 90% - Requires external components for operation - Relatively high quiescent current compared to some alternatives

Working Principles

The LTC3805IDD#TRPBF is a voltage mode synchronous step-down DC/DC controller. It regulates the output voltage by adjusting the duty cycle of the internal power switch. The input voltage is stepped down to the desired output voltage using an external power inductor and capacitor. Synchronous rectification improves efficiency by reducing power losses during switching.

The controller operates in continuous conduction mode (CCM) or discontinuous conduction mode (DCM) based on the load conditions. It features adjustable frequency control, allowing optimization for different applications. The soft-start feature ensures a controlled startup, preventing excessive inrush current.

Detailed Application Field Plans

The LTC3805IDD#TRPBF is suitable for various power management applications, including but not limited to: - Industrial equipment - Automotive systems - Telecommunications infrastructure - Distributed power supplies - Battery-powered devices - LED lighting

Its wide input voltage range, high efficiency, and comprehensive protection features make it versatile for different application scenarios.

Detailed and Complete Alternative Models

  1. LT8610ABEMSE#PBF: 42V, 2.5A Synchronous Step-Down Regulator
  2. LT8609SMPSE#PBF: 42V, 2.5A Synchronous Step-Down Regulator
  3. LT8645SMPSE#PBF: 65V, 4A Synchronous Step-Down Regulator
  4. LT8609ABEMSE#PBF: 42V, 2.5A Synchronous Step-Down Regulator
  5. LT8610BEMSE#PBF: 42V, 2.5A Synchronous Step-Down Regulator

These alternative models offer similar functionality and can be considered as substitutes for the LTC3805IDD#TRPBF depending on specific requirements.

(Note: The word count of this response is 369 words)

Lista 10 Vanliga frågor och svar relaterade till tillämpningen av LTC3805IDD#TRPBF i tekniska lösningar

Sure! Here are 10 common questions and answers related to the application of LTC3805IDD#TRPBF in technical solutions:

  1. Q: What is LTC3805IDD#TRPBF? A: LTC3805IDD#TRPBF is a specific model number for a power management integrated circuit (IC) manufactured by Linear Technology (now part of Analog Devices). It is designed for use in various technical solutions.

  2. Q: What are the key features of LTC3805IDD#TRPBF? A: Some key features of LTC3805IDD#TRPBF include wide input voltage range, high efficiency, adjustable frequency operation, integrated boost diode, and comprehensive protection features.

  3. Q: In what applications can LTC3805IDD#TRPBF be used? A: LTC3805IDD#TRPBF can be used in a wide range of applications such as power supplies, battery chargers, LED drivers, and other systems requiring efficient power management.

  4. Q: How does LTC3805IDD#TRPBF help in improving power efficiency? A: LTC3805IDD#TRPBF incorporates various techniques like pulse skipping, frequency foldback, and low quiescent current operation to maximize power efficiency in different load conditions.

  5. Q: Can LTC3805IDD#TRPBF handle high input voltages? A: Yes, LTC3805IDD#TRPBF has a wide input voltage range that allows it to handle high input voltages, typically up to several tens of volts.

  6. Q: Does LTC3805IDD#TRPBF have any built-in protection features? A: Yes, LTC3805IDD#TRPBF includes protection features like overvoltage protection, undervoltage lockout, thermal shutdown, and short-circuit protection to ensure safe operation.

  7. Q: Can LTC3805IDD#TRPBF be used in battery-powered applications? A: Yes, LTC3805IDD#TRPBF is suitable for battery-powered applications as it supports low quiescent current operation and can efficiently manage power from a battery source.

  8. Q: Is LTC3805IDD#TRPBF easy to integrate into existing designs? A: Yes, LTC3805IDD#TRPBF comes in a compact package and offers a simple interface, making it relatively easy to integrate into existing designs.

  9. Q: What is the typical operating frequency range of LTC3805IDD#TRPBF? A: The typical operating frequency range of LTC3805IDD#TRPBF is around several hundred kilohertz to a few megahertz, depending on the specific application requirements.

  10. Q: Where can I find more information about LTC3805IDD#TRPBF? A: You can find more detailed information about LTC3805IDD#TRPBF in the datasheet provided by Analog Devices or by visiting their official website.