Linear Technology/Analog Devices
Bild kan vara representation.
Se specifikationer för produktinformation.
LTC3839IUH#TRPBF
Visa detalj Datablad

LTC3839IUH#TRPBF

Product Overview

  • Category: Integrated Circuit (IC)
  • Use: Power Management
  • Characteristics: High Efficiency, Wide Input Voltage Range
  • Package: 38-Lead 5mm × 7mm QFN
  • Essence: Step-Down DC/DC Controller
  • Packaging/Quantity: Tape & Reel, 2500 units per reel

Specifications

  • Input Voltage Range: 4.5V to 60V
  • Output Voltage Range: 0.8V to 55V
  • Switching Frequency: Up to 2MHz
  • Maximum Duty Cycle: 90%
  • Quiescent Current: 40µA
  • Operating Temperature Range: -40°C to 125°C

Detailed Pin Configuration

The LTC3839IUH#TRPBF features a 38-lead 5mm × 7mm QFN package with the following pin configuration:

  1. VIN: Input Voltage
  2. GND: Ground
  3. FB: Feedback Voltage
  4. SS/TR/UVLO: Soft-Start, Tracking, and Undervoltage Lockout
  5. SYNC/MODE: Synchronization and Mode Selection
  6. VCC: Supply Voltage for Internal Circuitry
  7. PGND: Power Ground
  8. SW: Switch Node
  9. BST: Bootstrap Capacitor Connection
  10. COMP: Compensation Node
  11. RT/CLKOUT: Oscillator Timing Resistor and Clock Output
  12. CLKIN: External Clock Input
  13. CLKOUT: Clock Output
  14. AGND: Analog Ground
  15. PGOOD: Power Good Indicator
  16. SS/TR/UVLO: Soft-Start, Tracking, and Undervoltage Lockout
  17. SYNC/MODE: Synchronization and Mode Selection
  18. VCC: Supply Voltage for Internal Circuitry
  19. PGND: Power Ground
  20. SW: Switch Node
  21. BST: Bootstrap Capacitor Connection
  22. COMP: Compensation Node
  23. RT/CLKOUT: Oscillator Timing Resistor and Clock Output
  24. CLKIN: External Clock Input
  25. CLKOUT: Clock Output
  26. AGND: Analog Ground
  27. PGOOD: Power Good Indicator
  28. SS/TR/UVLO: Soft-Start, Tracking, and Undervoltage Lockout
  29. SYNC/MODE: Synchronization and Mode Selection
  30. VCC: Supply Voltage for Internal Circuitry
  31. PGND: Power Ground
  32. SW: Switch Node
  33. BST: Bootstrap Capacitor Connection
  34. COMP: Compensation Node
  35. RT/CLKOUT: Oscillator Timing Resistor and Clock Output
  36. CLKIN: External Clock Input
  37. CLKOUT: Clock Output
  38. AGND: Analog Ground

Functional Features

The LTC3839IUH#TRPBF offers the following functional features:

  1. High Efficiency: The step-down DC/DC controller provides high efficiency power conversion, minimizing energy loss.
  2. Wide Input Voltage Range: With an input voltage range of 4.5V to 60V, the LTC3839IUH#TRPBF is suitable for various applications.
  3. Adjustable Output Voltage: The output voltage can be adjusted from 0.8V to 55V, offering flexibility in power management.
  4. Synchronization Capability: The device supports synchronization with an external clock for precise timing control.
  5. Power Good Indicator: The power good indicator (PGOOD) provides a signal indicating the output voltage is within the desired range.

Advantages and Disadvantages

Advantages: - High efficiency power conversion - Wide input voltage range - Adjustable output voltage - Synchronization capability - Power good indicator for monitoring

Disadvantages: - None identified

Working Principles

The LTC3839IUH#TRPBF is a step-down DC/DC controller that operates by converting a higher input voltage to a lower output voltage. It utilizes a switching regulator topology to efficiently transfer power from the input source to the load. The device controls the duty cycle of the switching transistor to regulate the output voltage according to the feedback signal. By adjusting the duty cycle, the LTC3839IUH#TRPBF maintains a stable output voltage even with varying input conditions.

Detailed Application Field Plans

The LTC3839IUH#TRPBF is suitable for various applications, including but not limited to:

  1. Industrial Equipment: Power management in industrial machinery and equipment.
  2. Automotive Electronics: Voltage regulation in automotive electronic systems.
  3. Telecommunications: Power supply control in telecommunications infrastructure.
  4. Renewable Energy: Efficient power conversion in solar and wind energy systems.
  5. Consumer Electronics: Voltage regulation in consumer electronic devices.

Detailed and Complete Alternative Models

  1. LTC3839A:

Lista 10 Vanliga frågor och svar relaterade till tillämpningen av LTC3839IUH#TRPBF i tekniska lösningar

Sure! Here are 10 common questions and answers related to the application of LTC3839IUH#TRPBF in technical solutions:

  1. Q: What is LTC3839IUH#TRPBF? A: LTC3839IUH#TRPBF is a specific model number for a power management integrated circuit (PMIC) manufactured by Linear Technology (now part of Analog Devices). It is designed for high-efficiency synchronous buck-boost converters.

  2. Q: What are the key features of LTC3839IUH#TRPBF? A: Some key features of LTC3839IUH#TRPBF include wide input voltage range, high efficiency, programmable frequency, adjustable current limit, and various protection features like overvoltage and overcurrent protection.

  3. Q: What are the typical applications of LTC3839IUH#TRPBF? A: LTC3839IUH#TRPBF can be used in various applications such as battery-powered systems, portable devices, industrial equipment, automotive electronics, and telecommunications.

  4. Q: How does LTC3839IUH#TRPBF achieve high efficiency? A: LTC3839IUH#TRPBF achieves high efficiency through its synchronous buck-boost topology, which allows it to regulate the output voltage efficiently regardless of whether the input voltage is higher or lower than the desired output voltage.

  5. Q: Can LTC3839IUH#TRPBF handle both step-up and step-down conversions? A: Yes, LTC3839IUH#TRPBF is specifically designed for buck-boost conversions, meaning it can handle both step-up (boost) and step-down (buck) conversions efficiently.

  6. Q: What is the maximum input voltage that LTC3839IUH#TRPBF can handle? A: LTC3839IUH#TRPBF can handle a wide input voltage range from 2.8V to 60V, making it suitable for various applications with different power supply requirements.

  7. Q: How can I program the frequency of LTC3839IUH#TRPBF? A: The frequency of LTC3839IUH#TRPBF can be programmed using an external resistor connected to the RT pin. By adjusting the resistance value, you can set the desired switching frequency.

  8. Q: What protection features does LTC3839IUH#TRPBF offer? A: LTC3839IUH#TRPBF provides several protection features including overvoltage protection (OVP), overcurrent protection (OCP), thermal shutdown, and soft-start to ensure safe operation and prevent damage to the circuit.

  9. Q: Can LTC3839IUH#TRPBF operate in a wide temperature range? A: Yes, LTC3839IUH#TRPBF is designed to operate in a wide temperature range from -40°C to 125°C, making it suitable for both industrial and automotive applications.

  10. Q: Is there any evaluation board or reference design available for LTC3839IUH#TRPBF? A: Yes, Analog Devices provides evaluation boards and reference designs for LTC3839IUH#TRPBF, which can help users quickly prototype and evaluate their power management solutions based on this IC.

Please note that the answers provided here are general and may vary depending on the specific application and requirements. It is always recommended to refer to the datasheet and application notes provided by the manufacturer for detailed information and guidelines.