Bild kan vara representation.
Se specifikationer för produktinformation.
LTC3860EUH#PBF

LTC3860EUH#PBF

Product Overview

  • Category: Integrated Circuit (IC)
  • Use: Power Management
  • Characteristics: High Efficiency, Synchronous Step-Down DC/DC Controller
  • Package: 32-Lead QFN (5mm x 5mm)
  • Essence: Regulates and converts high voltage input to lower voltage output efficiently
  • Packaging/Quantity: Tube packaging, 90 units per tube

Specifications

  • Input Voltage Range: 4.5V to 38V
  • Output Voltage Range: 0.6V to 5.5V
  • Maximum Output Current: 20A
  • Switching Frequency: Adjustable up to 1MHz
  • Efficiency: Up to 95%
  • Operating Temperature Range: -40°C to 125°C

Detailed Pin Configuration

The LTC3860EUH#PBF features a 32-lead QFN package with the following pin configuration:

  1. VIN: Input Voltage
  2. PGND: Power Ground
  3. SW: Switch Node Connection
  4. VCC: Control Supply Voltage
  5. SS: Soft-Start Capacitor Connection
  6. FB: Feedback Voltage Input
  7. COMP: Compensation Node
  8. RT/CLKOUT: Oscillator Resistor/Clock Output
  9. SYNC/MODE: External Clock Sync or Mode Selection
  10. GATE: Gate Drive Output
  11. AGND: Analog Ground
  12. BOOT: Bootstrap Capacitor Connection
  13. BST: Boost Voltage Input
  14. VOUT: Output Voltage
  15. ITH: Current Sense Threshold
  16. OCSET: Overcurrent Protection Threshold
  17. PGOOD: Power Good Indicator
  18. SS/TRK: Soft-Start/Tracking Control
  19. CLKIN: External Clock Input
  20. CLKOUT: Clock Output

Functional Features

  • High Efficiency: The LTC3860EUH#PBF offers up to 95% efficiency, ensuring minimal power loss during voltage conversion.
  • Synchronous Step-Down: It operates as a synchronous step-down DC/DC controller, efficiently converting high input voltage to lower output voltage.
  • Adjustable Switching Frequency: The switching frequency can be adjusted up to 1MHz, allowing flexibility in design and optimization for different applications.
  • Overcurrent Protection: The OCSET pin enables overcurrent protection, safeguarding the system from excessive current flow.

Advantages and Disadvantages

Advantages: - High efficiency results in reduced power consumption and heat generation. - Wide input and output voltage range provide versatility in various applications. - Adjustable switching frequency allows optimization for different performance requirements. - Overcurrent protection enhances system reliability.

Disadvantages: - Limited maximum output current of 20A may not be suitable for high-power applications. - Requires external components for proper operation, increasing overall system complexity.

Working Principles

The LTC3860EUH#PBF operates on the principle of synchronous step-down conversion. It regulates the input voltage by controlling the duty cycle of the internal power switches. By efficiently converting the high input voltage to a lower output voltage, it minimizes power loss and maximizes energy transfer. The adjustable switching frequency allows for optimal performance based on specific application requirements.

Detailed Application Field Plans

The LTC3860EUH#PBF finds applications in various fields, including but not limited to:

  1. Industrial Automation: Power management for motor control systems, PLCs, and industrial equipment.
  2. Telecommunications: Voltage regulation for telecom infrastructure, base stations, and network equipment.
  3. Automotive Electronics: Power supply for automotive infotainment systems, advanced driver-assistance systems (ADAS), and electric vehicle charging.
  4. Renewable Energy: Efficient power conversion for solar inverters, wind turbines, and energy storage systems.
  5. Consumer Electronics: Power management for laptops, tablets, gaming consoles, and other portable devices.

Detailed and Complete Alternative Models

  1. LTC3860EUH#TRPBF: Similar to LTC3860EUH#PBF but available in tape and reel packaging.
  2. LTC3860IUH#PBF: 36-Lead QFN package variant with similar specifications and features.
  3. LTC3860CUH#PBF: 28-Lead QFN package variant with similar specifications and features.

These alternative models offer similar functionality and characteristics, providing options for different packaging preferences or space constraints.

Word count: 529 words

Lista 10 Vanliga frågor och svar relaterade till tillämpningen av LTC3860EUH#PBF i tekniska lösningar

Sure! Here are 10 common questions and answers related to the application of LTC3860EUH#PBF in technical solutions:

  1. Q: What is LTC3860EUH#PBF? A: LTC3860EUH#PBF is a high-performance synchronous step-down DC/DC controller IC manufactured by Linear Technology (now part of Analog Devices). It is commonly used in power management applications.

  2. Q: What is the input voltage range supported by LTC3860EUH#PBF? A: LTC3860EUH#PBF supports an input voltage range from 4.5V to 38V.

  3. Q: What is the output voltage range supported by LTC3860EUH#PBF? A: The output voltage range of LTC3860EUH#PBF can be adjusted from 0.6V to VIN.

  4. Q: What is the maximum output current that LTC3860EUH#PBF can handle? A: LTC3860EUH#PBF can handle a maximum output current of up to 20A.

  5. Q: Does LTC3860EUH#PBF require an external MOSFET for operation? A: Yes, LTC3860EUH#PBF requires an external N-channel MOSFET for operation.

  6. Q: Can LTC3860EUH#PBF operate in a synchronous rectification mode? A: Yes, LTC3860EUH#PBF supports synchronous rectification for improved efficiency.

  7. Q: Is there any built-in protection features in LTC3860EUH#PBF? A: Yes, LTC3860EUH#PBF includes various protection features like overvoltage protection, undervoltage lockout, and thermal shutdown.

  8. Q: What is the switching frequency range of LTC3860EUH#PBF? A: The switching frequency of LTC3860EUH#PBF can be programmed from 100kHz to 1MHz.

  9. Q: Can LTC3860EUH#PBF be used in automotive applications? A: Yes, LTC3860EUH#PBF is suitable for automotive applications as it meets the AEC-Q100 standard.

  10. Q: Are there any evaluation boards available for LTC3860EUH#PBF? A: Yes, Linear Technology (Analog Devices) provides evaluation boards and reference designs for LTC3860EUH#PBF to help with the development and testing process.

Please note that these answers are general and may vary depending on the specific application and requirements. It is always recommended to refer to the datasheet and consult with the manufacturer for detailed information.