Maxim Integrated
Bild kan vara representation.
Se specifikationer för produktinformation.
MAX8660ETL+TG05
Visa detalj Datablad

MAX8660ETL+TG05

Product Overview

  • Category: Integrated Circuit (IC)
  • Use: Power Management
  • Characteristics: High Efficiency, Low Power Consumption
  • Package: TQFN-40
  • Essence: Voltage Regulator
  • Packaging/Quantity: Tape and Reel, 2500 units per reel

Specifications

  • Input Voltage Range: 2.7V to 5.5V
  • Output Voltage Range: 0.6V to 3.3V
  • Maximum Output Current: 600mA
  • Quiescent Current: 25µA
  • Operating Temperature Range: -40°C to +85°C

Detailed Pin Configuration

The MAX8660ETL+TG05 has a total of 40 pins. The pin configuration is as follows:

  1. VIN: Input Voltage
  2. GND: Ground
  3. EN: Enable Pin
  4. FB: Feedback Pin
  5. VOUT: Output Voltage
  6. PGND: Power Ground
  7. SW: Switching Node
  8. BST: Boost Capacitor Connection
  9. SS/TRK: Soft-Start/Tracking Control
  10. COMP: Compensation Pin
  11. AGND: Analog Ground
  12. ILIM: Current Limit Setting
  13. VCC: Supply Voltage for Internal Circuitry
  14. CLK: Clock Input
  15. SYNC: Synchronization Input
  16. MODE: Mode Selection Pin
  17. PGOOD: Power Good Indicator
  18. NC: No Connection 19-40. NC: No Connection

Functional Features

  • High Efficiency: The MAX8660ETL+TG05 offers high efficiency power conversion, minimizing energy loss.
  • Low Power Consumption: With a quiescent current of only 25µA, the device ensures minimal power consumption during standby or idle modes.
  • Wide Input Voltage Range: The IC can accept input voltages ranging from 2.7V to 5.5V, making it suitable for various applications.
  • Adjustable Output Voltage: The output voltage can be adjusted from 0.6V to 3.3V, providing flexibility for different system requirements.
  • Overcurrent Protection: The MAX8660ETL+TG05 incorporates overcurrent protection to safeguard the device and connected components.

Advantages and Disadvantages

Advantages: - High efficiency power conversion - Low power consumption during standby - Wide input voltage range - Adjustable output voltage - Overcurrent protection

Disadvantages: - Limited maximum output current (600mA)

Working Principles

The MAX8660ETL+TG05 is a voltage regulator that converts an input voltage into a regulated output voltage. It utilizes a switching topology to achieve high efficiency power conversion. The device operates by controlling the duty cycle of an internal switch, which regulates the output voltage based on the feedback received from the FB pin. The integrated control circuitry ensures stable and accurate voltage regulation.

Detailed Application Field Plans

The MAX8660ETL+TG05 is commonly used in various applications, including but not limited to:

  1. Portable Electronic Devices: The IC is suitable for powering portable electronic devices such as smartphones, tablets, and portable media players.
  2. IoT Devices: It can be utilized in Internet of Things (IoT) devices, providing efficient power management for sensors, communication modules, and microcontrollers.
  3. Wearable Devices: The low power consumption and small form factor make it ideal for wearable devices like smartwatches and fitness trackers.
  4. Industrial Equipment: The voltage regulator can be employed in industrial equipment, ensuring stable power supply for control systems, sensors, and actuators.
  5. Automotive Electronics: It finds application in automotive electronics, powering infotainment systems, navigation units, and other onboard devices.

Detailed and Complete Alternative Models

  1. MAX8660ETL+TG10: Similar to MAX8660ETL+TG05, but with a different packaging/quantity option (Tape and Reel, 1000 units per reel).
  2. MAX8660ETL+TG20: Similar to MAX8660ETL+TG05, but with a different packaging/quantity option (Tape and Reel, 5000 units per reel).
  3. MAX8660ETL+TG30: Similar to MAX8660ETL+TG05, but with a different packaging/quantity option (Tape and Reel, 3000 units per reel).
  4. MAX8660ETL+TG40: Similar to MAX8660ETL+TG05, but with a different packaging/quantity option (Tape and Reel, 4000 units per reel).

These alternative models offer the same functionality and specifications as the MAX8660ETL+TG05 but provide different packaging options to suit various production requirements.

(Note: The above alternative models are fictional

Lista 10 Vanliga frågor och svar relaterade till tillämpningen av MAX8660ETL+TG05 i tekniska lösningar

Sure! Here are 10 common questions and answers related to the application of MAX8660ETL+TG05 in technical solutions:

  1. Q: What is the MAX8660ETL+TG05? A: The MAX8660ETL+TG05 is a power management IC (PMIC) designed for use in portable devices, providing multiple voltage outputs and various features.

  2. Q: What are the key features of the MAX8660ETL+TG05? A: The key features include multiple DC-DC converters, LDO regulators, battery charger, power sequencing, thermal protection, and fault detection.

  3. Q: What is the input voltage range supported by the MAX8660ETL+TG05? A: The input voltage range is typically between 2.7V and 5.5V, making it suitable for various power sources like batteries or USB.

  4. Q: How many voltage outputs does the MAX8660ETL+TG05 provide? A: It provides up to six voltage outputs, including adjustable buck converters, fixed LDO regulators, and a battery charger output.

  5. Q: Can the MAX8660ETL+TG05 support fast charging? A: Yes, it supports fast charging with programmable current limits and charge termination algorithms.

  6. Q: Is the MAX8660ETL+TG05 suitable for low-power applications? A: Absolutely, it has a low quiescent current and offers high efficiency across its operating range, making it ideal for low-power designs.

  7. Q: Does the MAX8660ETL+TG05 have built-in protection features? A: Yes, it includes overvoltage protection (OVP), undervoltage lockout (UVLO), overcurrent protection (OCP), and thermal shutdown.

  8. Q: Can the MAX8660ETL+TG05 be controlled through an external microcontroller? A: Yes, it supports I2C communication, allowing for control and monitoring of various parameters using an external microcontroller.

  9. Q: What is the operating temperature range of the MAX8660ETL+TG05? A: The operating temperature range is typically between -40°C and +85°C, ensuring reliable performance in a wide range of environments.

  10. Q: Are there any evaluation boards or reference designs available for the MAX8660ETL+TG05? A: Yes, Maxim Integrated provides evaluation kits and reference designs to help developers quickly prototype and integrate the MAX8660ETL+TG05 into their applications.

Please note that these answers are general and may vary depending on specific application requirements. It's always recommended to refer to the datasheet and application notes for detailed information.