Bild kan vara representation.
Se specifikationer för produktinformation.
11AA040T-I/MS

11AA040T-I/MS Product Overview

Introduction

The 11AA040T-I/MS is a non-volatile memory device belonging to the category of Serial EEPROMs. This product is widely used in various electronic applications due to its unique characteristics and functional features.

Basic Information Overview

  • Category: Serial EEPROM
  • Use: Non-volatile memory storage
  • Characteristics: Low power consumption, high reliability, small form factor
  • Package: MSOP (Mini Small Outline Package)
  • Essence: Data retention and storage
  • Packaging/Quantity: Typically available in reels with varying quantities

Specifications

  • Memory Capacity: 4 Kbits
  • Interface: I2C (Inter-Integrated Circuit)
  • Operating Voltage: 1.7V to 5.5V
  • Operating Temperature Range: -40°C to +85°C
  • Write Cycle Endurance: 1,000,000 cycles
  • Data Retention: 200 years

Detailed Pin Configuration

The 11AA040T-I/MS features a standard 8-pin configuration: 1. A0: Chip Address Input 2. A1: Chip Address Input 3. A2: Chip Address Input 4. VSS: Ground 5. SDA: Serial Data 6. SCL: Serial Clock 7. WP: Write Protect 8. VCC: Power Supply

Functional Features

  • Byte and Page Write Modes
  • Self-timed Write Cycle
  • Enhanced ESD/Latch-Up Protection
  • Schmitt Trigger Inputs
  • Partial Power-down Mode

Advantages and Disadvantages

Advantages

  • Low power consumption
  • High reliability and endurance
  • Small form factor
  • Easy interfacing with microcontrollers

Disadvantages

  • Limited storage capacity compared to other memory devices
  • Slower write speeds compared to some alternatives

Working Principles

The 11AA040T-I/MS operates by utilizing the I2C interface to communicate with the host microcontroller. It stores data in non-volatile memory cells, allowing for reliable and long-term data retention.

Detailed Application Field Plans

This product finds extensive use in various applications such as: - Consumer electronics - Industrial automation - Automotive systems - Medical devices - IoT (Internet of Things) devices

Detailed and Complete Alternative Models

Some alternative models to the 11AA040T-I/MS include: - 24AA04 - 25AA040 - AT24C04

In conclusion, the 11AA040T-I/MS Serial EEPROM offers a reliable and efficient solution for non-volatile memory storage in a wide range of electronic applications.

[Word Count: 398]

Lista 10 Vanliga frågor och svar relaterade till tillämpningen av 11AA040T-I/MS i tekniska lösningar

  1. What is the operating temperature range of 11AA040T-I/MS?
    - The operating temperature range of 11AA040T-I/MS is -40°C to +85°C.

  2. Can 11AA040T-I/MS be used in automotive applications?
    - Yes, 11AA040T-I/MS is suitable for automotive applications.

  3. What is the maximum clock frequency supported by 11AA040T-I/MS?
    - The maximum clock frequency supported by 11AA040T-I/MS is 1MHz.

  4. Does 11AA040T-I/MS support software write protection?
    - Yes, 11AA040T-I/MS supports software write protection.

  5. What is the typical standby current of 11AA040T-I/MS?
    - The typical standby current of 11AA040T-I/MS is 1µA.

  6. Can 11AA040T-I/MS operate with a wide voltage range?
    - Yes, 11AA040T-I/MS can operate with a wide voltage range from 1.7V to 5.5V.

  7. Is 11AA040T-I/MS compatible with I2C interface?
    - Yes, 11AA040T-I/MS is compatible with I2C interface.

  8. What is the maximum write cycle endurance of 11AA040T-I/MS?
    - The maximum write cycle endurance of 11AA040T-I/MS is 1 million cycles.

  9. Does 11AA040T-I/MS have built-in ECC (Error Correction Code)?
    - No, 11AA040T-I/MS does not have built-in ECC.

  10. Can 11AA040T-I/MS be used in industrial control systems?
    - Yes, 11AA040T-I/MS is suitable for use in industrial control systems.