AT28C256-15JU-043 belongs to the category of electrically erasable programmable read-only memory (EEPROM) chips.
This product is commonly used in electronic devices for storing and retrieving data. It provides non-volatile storage, meaning that the data remains intact even when power is removed.
The AT28C256-15JU-043 comes in a standard 28-pin plastic dual in-line package (DIP).
The essence of this product lies in its ability to provide reliable and flexible data storage in various electronic applications.
The AT28C256-15JU-043 is typically packaged in reels or tubes, with each reel or tube containing a specific quantity of chips. The exact packaging and quantity may vary depending on the supplier.
The AT28C256-15JU-043 has a total of 28 pins. The pin configuration is as follows:
The AT28C256-15JU-043 utilizes a combination of electronic circuits and semiconductor technology to store and retrieve data. It employs a grid of transistors that can be electrically programmed and erased. When data needs to be written or modified, specific voltages are applied to the appropriate pins, allowing the transistors to change their states and store the desired information. During read operations, the stored data is accessed by applying appropriate voltages and reading the resulting electrical signals.
The AT28C256-15JU-043 finds applications in various electronic devices and systems, including but not limited to: - Microcontrollers - Embedded systems - Industrial control systems - Automotive electronics - Communication equipment - Consumer electronics
Its versatility and reliability make it suitable for a wide range of applications that require non-volatile storage capabilities.
These alternative models provide options with varying specifications to cater to different application requirements.
In conclusion, the AT28C256-15JU-043 is an electrically eras
Sure! Here are 10 common questions and answers related to the application of AT28C256-15JU-043 in technical solutions:
Q: What is the AT28C256-15JU-043? A: The AT28C256-15JU-043 is a 256-kilobit (32K x 8) electrically erasable programmable read-only memory (EEPROM) chip.
Q: What is the operating voltage range for the AT28C256-15JU-043? A: The AT28C256-15JU-043 operates within a voltage range of 4.5V to 5.5V.
Q: How fast can the AT28C256-15JU-043 be accessed? A: The AT28C256-15JU-043 has a maximum access time of 150 nanoseconds (ns).
Q: Can the AT28C256-15JU-043 be reprogrammed multiple times? A: Yes, the AT28C256-15JU-043 can be reprogrammed multiple times as it is an electrically erasable memory.
Q: What is the endurance of the AT28C256-15JU-043? A: The AT28C256-15JU-043 has a typical endurance of 100,000 erase/write cycles.
Q: Does the AT28C256-15JU-043 require any external power supply sequencing? A: No, the AT28C256-15JU-043 does not require any specific power supply sequencing.
Q: Can the AT28C256-15JU-043 operate in harsh environments? A: Yes, the AT28C256-15JU-043 is designed to operate in industrial temperature ranges (-40°C to +85°C) and is suitable for harsh environments.
Q: What is the package type of the AT28C256-15JU-043? A: The AT28C256-15JU-043 comes in a 32-lead PLCC (Plastic Leaded Chip Carrier) package.
Q: Can the AT28C256-15JU-043 be used in battery-powered applications? A: Yes, the AT28C256-15JU-043 can be used in battery-powered applications as it operates within a low voltage range.
Q: Are there any special considerations for programming the AT28C256-15JU-043? A: Yes, the AT28C256-15JU-043 requires specific programming voltages and timing sequences, which should be followed as per the datasheet guidelines.
Please note that these answers are based on general information about the AT28C256-15JU-043 and may vary depending on specific application requirements. It is always recommended to refer to the datasheet and consult with technical experts for accurate and detailed information.