Microchip Technology
Bild kan vara representation.
Se specifikationer för produktinformation.
AT29C1024-70JC
Visa detalj Datablad

AT29C1024-70JC

Product Overview

Category

The AT29C1024-70JC belongs to the category of non-volatile memory devices.

Use

This product is commonly used for storing and retrieving digital information in various electronic systems.

Characteristics

  • Non-volatile: The AT29C1024-70JC retains stored data even when power is removed.
  • High capacity: It has a storage capacity of 1,048,576 bits (128 kilobytes).
  • Fast access time: The device offers a fast access time of 70 nanoseconds.
  • Low power consumption: It operates on low power, making it suitable for battery-powered devices.

Package

The AT29C1024-70JC is available in a 32-pin PLCC (Plastic Leaded Chip Carrier) package.

Essence

This product is an electrically erasable and programmable read-only memory (EEPROM) chip.

Packaging/Quantity

The AT29C1024-70JC is typically packaged in reels or tubes, with quantities varying based on customer requirements.

Specifications

  • Organization: 128K x 8 bits
  • Supply voltage: 5V ±10%
  • Operating temperature range: -40°C to +85°C
  • Erase/Program cycles: 10,000 minimum
  • Data retention: 20 years minimum

Detailed Pin Configuration

The AT29C1024-70JC has a total of 32 pins. Here is the pin configuration:

  1. A16
  2. A14
  3. A12
  4. A7
  5. A6
  6. A5
  7. A4
  8. A3
  9. A2
  10. A1
  11. A0
  12. VPP
  13. OE#
  14. CE#
  15. WE#
  16. I/O0
  17. I/O1
  18. I/O2
  19. I/O3
  20. I/O4
  21. I/O5
  22. I/O6
  23. I/O7
  24. VCC
  25. GND
  26. NC
  27. A8
  28. A9
  29. A11
  30. A13
  31. A15
  32. NC

Functional Features

  • Byte-wise programmable: The AT29C1024-70JC allows individual bytes to be programmed or erased.
  • Easy interface: It supports a standard parallel interface for easy integration into various systems.
  • Hardware and software protection: The chip provides protection mechanisms to prevent accidental writes or erases.
  • High reliability: With a long data retention period and high endurance, it ensures reliable data storage.

Advantages and Disadvantages

Advantages

  • Non-volatile memory ensures data persistence.
  • High storage capacity for various applications.
  • Fast access time enables quick data retrieval.
  • Low power consumption extends battery life.
  • Robust protection mechanisms safeguard data integrity.

Disadvantages

  • Limited erase/program cycles may restrict certain applications.
  • Relatively higher cost compared to other memory technologies.
  • Larger physical size due to the PLCC package.

Working Principles

The AT29C1024-70JC utilizes electrically erasable programmable read-only memory (EEPROM) technology. It stores data by trapping electrical charges in floating gate transistors. To program or erase data, specific voltage levels are applied to the control pins, enabling the modification of stored information.

Detailed Application Field Plans

The AT29C1024-70JC finds application in various electronic systems, including but not limited to: - Embedded systems - Microcontrollers - Industrial automation - Automotive electronics - Consumer electronics

Detailed and Complete Alternative Models

  • AT28C256: 32K x 8 EEPROM with similar characteristics but lower capacity.
  • AT49BV1614: 2M x 8 Flash memory with higher capacity and faster access time.
  • AT24C02: 256 x 8 serial EEPROM with smaller capacity and different interface.

These alternative models offer different specifications and features, allowing users to choose the most suitable option for their specific requirements.

Word count: 536 words

Lista 10 Vanliga frågor och svar relaterade till tillämpningen av AT29C1024-70JC i tekniska lösningar

Sure! Here are 10 common questions and answers related to the application of AT29C1024-70JC in technical solutions:

  1. Q: What is the AT29C1024-70JC? A: The AT29C1024-70JC is a 1-megabit (128K x 8) CMOS flash memory chip manufactured by Atmel.

  2. Q: What are the key features of the AT29C1024-70JC? A: The key features include a 70ns access time, low power consumption, byte-wide data access, and compatibility with standard microcontrollers.

  3. Q: How can I interface the AT29C1024-70JC with a microcontroller? A: The AT29C1024-70JC uses a parallel interface, so you can connect it to a microcontroller using address, data, and control lines.

  4. Q: Can I use the AT29C1024-70JC as a storage device for my embedded system? A: Yes, the AT29C1024-70JC can be used as a non-volatile storage device to store program code or data in embedded systems.

  5. Q: Is the AT29C1024-70JC suitable for high-speed applications? A: Yes, the 70ns access time of the AT29C1024-70JC makes it suitable for many high-speed applications, including real-time systems.

  6. Q: Can I reprogram the AT29C1024-70JC multiple times? A: Yes, the AT29C1024-70JC supports in-system programming and can be reprogrammed multiple times using appropriate programming tools.

  7. Q: What is the operating voltage range of the AT29C1024-70JC? A: The AT29C1024-70JC operates within a voltage range of 2.7V to 5.5V, making it compatible with a wide range of microcontrollers.

  8. Q: Does the AT29C1024-70JC have any built-in security features? A: No, the AT29C1024-70JC does not have built-in security features like write protection or encryption.

  9. Q: Can I use the AT29C1024-70JC in automotive applications? A: Yes, the AT29C1024-70JC is suitable for automotive applications as it meets the necessary temperature and reliability requirements.

  10. Q: Are there any specific precautions I need to take while handling the AT29C1024-70JC? A: It is recommended to follow standard ESD (Electrostatic Discharge) precautions while handling the AT29C1024-70JC to prevent damage to the chip.

Please note that these answers are general and may vary depending on the specific application and requirements.