The AT49BV802AT-70TI belongs to the category of non-volatile memory devices.
It is primarily used for storing and retrieving data in electronic systems.
The AT49BV802AT-70TI is available in a surface-mount TSOP package.
The essence of this product lies in its ability to provide reliable and non-volatile storage for electronic systems.
The AT49BV802AT-70TI is typically packaged in reels, with each reel containing a specific quantity of devices. The exact quantity may vary depending on the manufacturer's specifications.
The AT49BV802AT-70TI has a total of 32 pins. The pin configuration is as follows:
The AT49BV802AT-70TI utilizes flash memory technology to store data. It employs a combination of floating-gate transistors and charge trapping mechanisms to retain information even when power is turned off. The memory cells are organized into sectors, which can be individually erased or programmed.
During programming, an electrical charge is applied to the floating gate, altering its threshold voltage and storing data. Erasing is achieved by removing the charge from the floating gate, resetting the memory cell to an erased state.
The AT49BV802AT-70TI finds applications in various electronic systems, including but not limited to: - Embedded systems - Consumer electronics - Automotive electronics - Industrial control systems - Communication devices
Its high capacity, fast access time, and reliability make it suitable for storing firmware, configuration data, and other critical information in these fields.
These alternative models offer similar storage capacities and functionalities, catering
Sure! Here are 10 common questions and answers related to the application of AT49BV802AT-70TI in technical solutions:
Q: What is the AT49BV802AT-70TI? A: The AT49BV802AT-70TI is a 8-megabit (1M x 8) CMOS flash memory device.
Q: What are the key features of the AT49BV802AT-70TI? A: Some key features include a 70ns access time, low power consumption, and compatibility with various microcontrollers.
Q: What is the operating voltage range for the AT49BV802AT-70TI? A: The operating voltage range is typically between 2.7V and 3.6V.
Q: Can the AT49BV802AT-70TI be used as a boot device? A: Yes, it can be used as a boot device due to its fast access time and compatibility with boot code execution.
Q: Is the AT49BV802AT-70TI suitable for automotive applications? A: Yes, the AT49BV802AT-70TI is designed to meet the requirements of automotive applications.
Q: Does the AT49BV802AT-70TI support in-system programming? A: Yes, it supports in-system programming, allowing for easy firmware updates.
Q: What is the endurance rating of the AT49BV802AT-70TI? A: The AT49BV802AT-70TI has an endurance rating of at least 100,000 program/erase cycles.
Q: Can the AT49BV802AT-70TI operate in harsh environments? A: Yes, it has a wide operating temperature range of -40°C to +85°C, making it suitable for harsh environments.
Q: What is the package type of the AT49BV802AT-70TI? A: The AT49BV802AT-70TI is available in a 32-lead TSOP (Thin Small Outline Package).
Q: Are there any known limitations or considerations when using the AT49BV802AT-70TI? A: It's important to note that the device requires proper handling and ESD precautions during installation and operation to avoid damage.
Please let me know if you need further information on any of these questions!