AT90S2313-10SI

Product Overview

Use

This microcontroller is commonly used in various electronic applications that require embedded control and processing capabilities.

Characteristics

Low-power consumption
High-performance RISC architecture
In-system programmable
2KB of Flash memory
128 bytes of EEPROM
128 bytes of SRAM
15 general-purpose I/O lines
32 general-purpose working registers
8-channel, 10-bit ADC
Full-duplex UART
Two 8-bit timer/counters with PWM
One 16-bit timer/counter with PWM
Programmable Watchdog Timer
Power-on Reset and Programmable Brown-out Detection
On-chip analog comparator
Operating voltage: 2.7V to 5.5V

Package

AT90S2313-10SI is available in a 20-pin plastic shrink dual inline package (PDIP).

Essence

The essence of AT90S2313-10SI lies in its ability to provide a compact and versatile microcontroller solution for various applications.

Packaging/Quantity

AT90S2313-10SI is typically packaged in reels or tubes, with quantities varying based on customer requirements.

Specifications

Microcontroller type: 8-bit AVR
Clock speed: 10 MHz
Program memory size: 2KB
Data EEPROM size: 128 bytes
Data SRAM size: 128 bytes
Number of I/O lines: 15
ADC resolution: 10-bit
UART: Full-duplex
Timers/Counters: Two 8-bit, One 16-bit
Operating voltage range: 2.7V to 5.5V
Operating temperature range: -40°C to +85°C

Detailed Pin Configuration

The AT90S2313-10SI microcontroller has a total of 20 pins, each serving a specific purpose. The pin configuration is as follows:

RESET: Reset input
XTAL1: Crystal oscillator input
XTAL2: Crystal oscillator output
GND: Ground
PORTB0: General-purpose I/O pin
PORTB1: General-purpose I/O pin
PORTB2: General-purpose I/O pin
PORTB3: General-purpose I/O pin
PORTB4: General-purpose I/O pin
PORTB5: General-purpose I/O pin
PORTB6: General-purpose I/O pin
PORTB7: General-purpose I/O pin
VCC: Supply voltage
GND: Ground
PORTD0: General-purpose I/O pin
PORTD1: General-purpose I/O pin
PORTD2: General-purpose I/O pin
PORTD3: General-purpose I/O pin
PORTD4: General-purpose I/O pin
PORTD5: General-purpose I/O pin

Functional Features

AT90S2313-10SI offers several functional features that make it suitable for a wide range of applications:

High-performance RISC architecture enables efficient execution of instructions.
In-system programmability allows for easy firmware updates without the need for external programming equipment.
Ample program memory (2KB Flash) and data storage (128 bytes EEPROM and SRAM) provide sufficient space for code and data storage.
Multiple general-purpose I/O lines (15) offer flexibility in interfacing with external devices.
On-chip peripherals such as ADC, UART, and timers/counters enhance the microcontroller's capabilities.
Low-power consumption ensures efficient operation in battery-powered applications.

Advantages and Disadvantages

Advantages

Compact size and low power consumption make it suitable for portable and battery-powered devices.
In-system programmability allows for easy firmware updates and reduces the need for external programming hardware.
Ample program memory and data storage provide flexibility for various applications.
On-chip peripherals eliminate the need for additional external components, reducing cost and complexity.

Disadvantages

Limited program memory (2KB) may restrict the complexity of applications that can be implemented.
Limited I/O lines (15) may limit the number of external devices that can be interfaced simultaneously.

Working Principles

AT90S2313-10SI operates based on the principles of a high-performance RISC architecture. It executes instructions stored in its program memory, interacts with external devices through its I/O lines, and utilizes on-chip peripherals to perform specific tasks. The microcontroller can be programmed using in-system programming techniques, allowing for easy firmware updates and customization.

#

Lista 10 Vanliga frågor och svar relaterade till tillämpningen av AT90S2313-10SI i tekniska lösningar

Sure! Here are 10 common questions and answers related to the application of AT90S2313-10SI in technical solutions:

Q: What is the AT90S2313-10SI microcontroller used for? A: The AT90S2313-10SI is a microcontroller commonly used in embedded systems for various applications such as robotics, automation, and control systems.
Q: What is the operating voltage range of the AT90S2313-10SI? A: The AT90S2313-10SI operates within a voltage range of 2.7V to 5.5V.
Q: How much flash memory does the AT90S2313-10SI have? A: The AT90S2313-10SI has 2KB of flash memory for program storage.
Q: Can I use the AT90S2313-10SI for analog signal processing? A: No, the AT90S2313-10SI does not have built-in analog-to-digital converters (ADCs) or digital-to-analog converters (DACs). For analog signal processing, you may need external components.
Q: What communication interfaces does the AT90S2313-10SI support? A: The AT90S2313-10SI supports serial communication through its USART (Universal Synchronous/Asynchronous Receiver/Transmitter) interface.
Q: Can I connect external memory to the AT90S2313-10SI? A: No, the AT90S2313-10SI does not have an external memory interface. It only has internal flash and SRAM.
Q: What is the maximum clock frequency of the AT90S2313-10SI? A: The AT90S2313-10SI can operate at a maximum clock frequency of 10 MHz.
Q: Does the AT90S2313-10SI have any built-in timers? A: Yes, the AT90S2313-10SI has two 8-bit timers and one 16-bit timer with various operating modes.
Q: Can I program the AT90S2313-10SI using C or assembly language? A: Yes, you can program the AT90S2313-10SI using either C or assembly language, depending on your preference and requirements.
Q: Is the AT90S2313-10SI still in production? A: No, the AT90S2313-10SI is an older microcontroller and has been discontinued by the manufacturer. It may still be available from some distributors or as surplus stock.