Bild kan vara representation.
Se specifikationer för produktinformation.
AT90S2313-4SI

AT90S2313-4SI

Product Overview

Category

AT90S2313-4SI belongs to the category of microcontrollers.

Use

This microcontroller is commonly used in various electronic applications that require embedded control systems.

Characteristics

  • Low-power consumption
  • High-performance RISC architecture
  • In-system programmable
  • 2KB of Flash memory
  • 128 bytes of EEPROM
  • 128 bytes of SRAM
  • 15 general-purpose I/O lines
  • 32 general-purpose working registers
  • 8-channel, 10-bit ADC
  • Two 8-bit Timer/Counters
  • One 16-bit Timer/Counter with PWM
  • Serial programmable USART
  • SPI serial interface
  • On-chip analog comparator
  • Power-on Reset and Programmable Brown-out Detection
  • Internal Calibrated RC Oscillator
  • External and Internal Interrupt Sources

Package

AT90S2313-4SI is available in a 20-pin plastic shrink dual in-line package (PDIP).

Essence

The essence of AT90S2313-4SI lies in its ability to provide a compact and versatile microcontroller solution for a wide range of applications.

Packaging/Quantity

AT90S2313-4SI is typically packaged in reels or tubes, with quantities varying based on customer requirements.

Specifications

  • Operating Voltage: 2.7V - 5.5V
  • CPU Clock Speed: Up to 8 MHz
  • Digital I/O Pins: 15
  • Analog Input Pins: 8
  • Flash Memory: 2KB
  • EEPROM: 128 bytes
  • SRAM: 128 bytes
  • Communication Interfaces: USART, SPI
  • Timers/Counters: 3 (2x 8-bit, 1x 16-bit)
  • ADC Resolution: 10-bit
  • Operating Temperature Range: -40°C to +85°C

Detailed Pin Configuration

The AT90S2313-4SI microcontroller has a total of 20 pins, each serving a specific purpose. The pin configuration is as follows:

  1. RESET: Reset Input
  2. XTAL1: Crystal Oscillator Input
  3. XTAL2: Crystal Oscillator Output
  4. GND: Ground
  5. PORTB0: General Purpose I/O Pin
  6. PORTB1: General Purpose I/O Pin
  7. PORTB2: General Purpose I/O Pin
  8. PORTB3: General Purpose I/O Pin
  9. PORTB4: General Purpose I/O Pin
  10. PORTB5: General Purpose I/O Pin
  11. MISO: SPI Master In Slave Out
  12. MOSI: SPI Master Out Slave In
  13. SCK: SPI Serial Clock
  14. RESET: Reset Output
  15. VCC: Supply Voltage
  16. AREF: Analog Reference Voltage
  17. GND: Ground
  18. AVCC: Analog Supply Voltage
  19. ADC7: Analog Input Channel 7
  20. ADC6: Analog Input Channel 6

Functional Features

  • Low-power consumption allows for extended battery life in portable applications.
  • High-performance RISC architecture enables efficient execution of instructions.
  • In-system programmability allows for easy firmware updates without removing the microcontroller from the circuit.
  • On-chip peripherals such as USART and SPI provide versatile communication options.
  • Internal calibrated RC oscillator eliminates the need for an external clock source in many applications.
  • Power-on Reset and Programmable Brown-out Detection ensure reliable operation.

Advantages and Disadvantages

Advantages

  • Compact size and low power consumption make it suitable for portable devices.
  • Versatile I/O capabilities enable interfacing with various external components.
  • In-system programmability simplifies firmware updates and debugging.
  • On-chip peripherals reduce the need for additional external components.

Disadvantages

  • Limited Flash memory and SRAM may restrict the complexity of applications.
  • Lack of advanced features compared to more modern microcontrollers.
  • Availability may be limited due to its older generation.

Working Principles

AT90S2313-4SI operates based on the principles of a RISC (Reduced Instruction Set Computer) architecture. It executes instructions stored in its Flash memory, utilizing its working registers and peripherals to perform desired tasks. The microcontroller can be programmed using suitable development tools and software, allowing users to define the behavior and functionality of their applications.

Detailed Application Field Plans

AT90S2313-4SI finds applications in various fields, including but not limited to: - Home automation systems - Industrial control systems - Robotics - Sensor networks - Automotive electronics - Medical devices - Consumer electronics

Detailed and Complete Alternative Models

While AT90S2313-4SI is a reliable microcontroller, there are alternative models available that offer similar

Lista 10 Vanliga frågor och svar relaterade till tillämpningen av AT90S2313-4SI i tekniska lösningar

Sure! Here are 10 common questions and answers related to the application of AT90S2313-4SI in technical solutions:

  1. Q: What is the AT90S2313-4SI microcontroller? A: The AT90S2313-4SI is a low-power, high-performance 8-bit microcontroller from Atmel.

  2. Q: What are the key features of the AT90S2313-4SI? A: Some key features include 2KB of Flash memory, 128 bytes of SRAM, 15 general-purpose I/O pins, and a wide operating voltage range.

  3. Q: What programming language can be used with the AT90S2313-4SI? A: The AT90S2313-4SI can be programmed using C or assembly language.

  4. Q: Can the AT90S2313-4SI be used for embedded systems? A: Yes, the AT90S2313-4SI is commonly used in various embedded systems applications due to its small size and low power consumption.

  5. Q: How can I program the AT90S2313-4SI microcontroller? A: You can use an In-System Programmer (ISP) or a parallel programmer to program the AT90S2313-4SI.

  6. Q: What peripherals can be interfaced with the AT90S2313-4SI? A: The AT90S2313-4SI supports various peripherals such as UART, SPI, I2C, timers, and interrupts.

  7. Q: What is the maximum clock frequency of the AT90S2313-4SI? A: The AT90S2313-4SI can operate at a maximum clock frequency of 4 MHz.

  8. Q: Can the AT90S2313-4SI be used in battery-powered applications? A: Yes, the low-power features of the AT90S2313-4SI make it suitable for battery-powered applications.

  9. Q: Are there any development boards available for the AT90S2313-4SI? A: Yes, there are development boards specifically designed for the AT90S2313-4SI that provide easy prototyping and testing.

  10. Q: What are some common applications of the AT90S2313-4SI? A: The AT90S2313-4SI is commonly used in applications such as home automation, industrial control systems, robotics, and consumer electronics.

Please note that these questions and answers are general and may vary depending on specific requirements and use cases.