PIC16C924T-08I/L

Product Overview

Category

The PIC16C924T-08I/L belongs to the category of microcontrollers.

Use

This microcontroller is commonly used in various electronic devices and systems for controlling and processing data.

Characteristics

• High-performance 8-bit microcontroller
• Low power consumption
• Wide operating voltage range
• Large program memory capacity
• Multiple communication interfaces
• Integrated analog-to-digital converter (ADC)
• Enhanced peripheral features

Package

The PIC16C924T-08I/L is available in a compact and durable package, suitable for surface mount technology (SMT) applications.

Essence

The essence of this microcontroller lies in its ability to provide efficient control and processing capabilities in a wide range of electronic applications.

Packaging/Quantity

The PIC16C924T-08I/L is typically packaged in reels or tubes, with a quantity of 1000 units per package.

Specifications

• Architecture: 8-bit RISC
• CPU Speed: 8 MHz
• Program Memory Size: 14 KB
• RAM Size: 368 bytes
• Data EEPROM Size: 256 bytes
• Number of I/O Pins: 35
• Operating Voltage Range: 2.5V to 5.5V
• Communication Interfaces: USART, SPI, I2C
• Analog-to-Digital Converter (ADC): 10-bit, 8 channels
• Timers/Counters: 3 timers, 1 watchdog timer
• Operating Temperature Range: -40°C to +85°C

Detailed Pin Configuration

The PIC16C924T-08I/L has a total of 35 pins, each serving a specific purpose. The pin configuration is as follows:

1. VDD - Power supply voltage
2. RA0 - General-purpose I/O pin
3. RA1 - General-purpose I/O pin
4. RA2 - General-purpose I/O pin
5. RA3 - General-purpose I/O pin
6. RA4 - General-purpose I/O pin
7. RA5 - General-purpose I/O pin
8. VSS - Ground
9. RB0 - General-purpose I/O pin
10. RB1 - General-purpose I/O pin
11. RB2 - General-purpose I/O pin
12. RB3 - General-purpose I/O pin
13. RB4 - General-purpose I/O pin
14. RB5 - General-purpose I/O pin
15. RB6 - General-purpose I/O pin
16. RB7 - General-purpose I/O pin
17. RC0 - General-purpose I/O pin
18. RC1 - General-purpose I/O pin
19. RC2 - General-purpose I/O pin
20. RC3 - General-purpose I/O pin
21. RC4 - General-purpose I/O pin
22. RC5 - General-purpose I/O pin
23. RC6 - General-purpose I/O pin
24. RC7 - General-purpose I/O pin
25. OSC1 - Oscillator input
26. OSC2 - Oscillator output
27. MCLR - Master Clear (Reset) input
28. VPP - Programming voltage input
29. TX/CK - USART/SPI/I2C transmit or clock pin
30. RX/DT - USART/SPI/I2C receive or data pin
31. AN0 - Analog input channel 0
32. AN1 - Analog input channel 1
33. AN2 - Analog input channel 2
34. AN3 - Analog input channel 3
35. VREF - Reference voltage for ADC

Functional Features

The PIC16C924T-08I/L offers several functional features that enhance its performance and versatility:

1. High-speed processing capabilities
2. Flexible I/O configuration for interfacing with external devices
3. Built-in communication interfaces for seamless data transfer
4. Analog-to-digital converter for precise analog signal measurement
5. Timers and counters for accurate timing and event control
6. Low power consumption for energy-efficient operation
7. Enhanced peripheral features for extended functionality

Advantages and Disadvantages

Advantages

• High-performance microcontroller suitable for various applications
• Wide operating voltage range allows compatibility with different power sources
• Large program memory capacity enables complex program execution
• Integrated analog-to-digital converter simplifies analog signal processing
• Multiple communication interfaces facilitate data exchange with other devices
• Low power consumption prolongs battery life in portable applications

Disadvantages

• Limited RAM size may restrict the complexity of data manipulation
• Lack of advanced features found in more advanced microcontrollers
• Relatively higher cost compared to lower-end microcontrollers

Working Principles

The PIC16C924T-08I/L operates based on the principles of a RISC (Reduc