PIC16F723-I/SP

Product Overview

Category

The PIC16F723-I/SP belongs to the category of microcontrollers.

Use

This microcontroller is commonly used in various electronic applications that require embedded control and processing capabilities.

Characteristics

• Low power consumption
• High-performance RISC CPU
• Wide operating voltage range
• Flash program memory
• EEPROM data memory
• Multiple communication interfaces
• Analog-to-digital converter (ADC)
• Timers and PWM modules
• Interrupt capability

Package

The PIC16F723-I/SP is available in a 28-pin plastic dual inline package (DIP).

Essence

The essence of the PIC16F723-I/SP lies in its ability to provide efficient and reliable control and processing functions in a compact form factor.

Packaging/Quantity

This microcontroller is typically sold in reels or tubes, with each reel/tube containing a specific quantity of units. The exact packaging and quantity may vary depending on the supplier.

Specifications

• Operating Voltage: 2.3V to 5.5V
• Flash Program Memory: 7KB
• RAM Data Memory: 256 bytes
• EEPROM Data Memory: 256 bytes
• I/O Pins: 25
• Communication Interfaces: USART, SPI, I2C
• Analog-to-Digital Converter (ADC): 10-bit, 8 channels
• Timers: 3 x 8-bit, 1 x 16-bit
• Pulse Width Modulation (PWM) Modules: 2
• Maximum Speed: 20 MHz

Detailed Pin Configuration

The PIC16F723-I/SP has a total of 28 pins. The pin configuration is as follows:

1. VDD - Power supply voltage
2. RA0/AN0 - Analog input / Digital I/O
3. RA1/AN1 - Analog input / Digital I/O
4. RA2/AN2 - Analog input / Digital I/O
5. RA3/AN3 - Analog input / Digital I/O
6. RA4/T0CKI/C1OUT - Timer0 clock input / Digital I/O / Comparator output
7. RA5/AN4/SS - Analog input / Digital I/O / Slave Select (SPI)
8. RE0/RD/AN5 - Reset input / Read/Write control / Analog input
9. RE1/WR/AN6 - Write control / Read/Write control / Analog input
10. RE2/CS/AN7 - Chip select / Read/Write control / Analog input
11. VSS - Ground
12. OSC1/CLKIN - Oscillator input
13. OSC2/CLKOUT - Oscillator output
14. RC0/T1OSO/T1CKI - Timer1 oscillator output / Timer1 clock input
15. RC1/T1OSI/CCP2 - Timer1 oscillator input / Capture/Compare/PWM 2
16. RC2/CCP1 - Capture/Compare/PWM 1
17. RC3/SCK/SCL - Serial Clock (SPI/I2C)
18. RC4/SDI/SDA - Serial Data In (SPI/I2C)
19. RC5/SDO - Serial Data Out (SPI)
20. RC6/TX/CK - USART Transmit / Clock
21. RC7/RX/DT - USART Receive / Data
22. RB0/INT0 - External Interrupt 0
23. RB1/INT1 - External Interrupt 1
24. RB2/INT2/VMO - External Interrupt 2 / Voltage Monitor Output
25. RB3/INT3/VPO - External Interrupt 3 / Voltage Probe Output
26. RB4/KBI0/PGM - Keyboard Interrupt 0 / Programming Mode
27. RB5/KBI1/PGC - Keyboard Interrupt 1 / Programming Clock
28. RB6/KBI2/PGD - Keyboard Interrupt 2 / Programming Data

Functional Features

The PIC16F723-I/SP offers a range of functional features that enhance its usability and performance:

1. High-performance RISC CPU: The microcontroller is equipped with a powerful CPU that enables efficient execution of instructions.
2. Flash Program Memory: The onboard flash memory allows for easy reprogramming of the microcontroller.
3. EEPROM Data Memory: The electrically erasable programmable read-only memory (EEPROM) provides non-volatile storage for critical data.
4. Communication Interfaces: The microcontroller supports USART, SPI, and I2C interfaces, enabling seamless communication with other devices.
5. Analog-to-Digital Converter (ADC): The built-in ADC allows for accurate conversion of analog signals into digital values.
6. Timers and PWM Modules: The timers and PWM modules facilitate precise timing and