Microchip Technology
Bild kan vara representation.
Se specifikationer för produktinformation.
PIC18LF4410T-I/ML
Visa detalj Datablad

PIC18LF4410T-I/ML

Product Overview

Category

The PIC18LF4410T-I/ML belongs to the category of microcontrollers.

Use

This microcontroller is commonly used in various electronic applications that require embedded control and processing capabilities.

Characteristics

  • High-performance 8-bit architecture
  • Flash memory for program storage
  • Integrated peripherals for enhanced functionality
  • Low power consumption
  • Wide operating voltage range
  • Robust communication interfaces

Package

The PIC18LF4410T-I/ML is available in a small form factor package, specifically the ML (QFN) package.

Essence

The essence of this microcontroller lies in its ability to provide efficient and reliable control and processing capabilities for a wide range of electronic applications.

Packaging/Quantity

The PIC18LF4410T-I/ML is typically packaged in reels or tubes, with a quantity of 250 units per reel/tube.

Specifications

  • Microcontroller Family: PIC18
  • Core Size: 8-bit
  • Program Memory Size: 16KB
  • RAM Size: 768 bytes
  • Number of I/O Pins: 35
  • Operating Voltage Range: 2.0V to 5.5V
  • Maximum Speed: 40 MHz
  • Communication Interfaces: UART, SPI, I2C
  • Analog-to-Digital Converter (ADC): 10-bit, 13 channels
  • Timers: 8-bit and 16-bit timers
  • Operating Temperature Range: -40°C to +85°C

Detailed Pin Configuration

The PIC18LF4410T-I/ML has a total of 35 pins, each serving a specific purpose. The pin configuration is as follows:

  1. VDD - Power supply voltage
  2. RA0 - General-purpose I/O pin
  3. RA1 - General-purpose I/O pin
  4. RA2 - General-purpose I/O pin
  5. RA3 - General-purpose I/O pin
  6. RA4 - General-purpose I/O pin
  7. RA5 - General-purpose I/O pin
  8. VSS - Ground
  9. RB0 - General-purpose I/O pin
  10. RB1 - General-purpose I/O pin
  11. RB2 - General-purpose I/O pin
  12. RB3 - General-purpose I/O pin
  13. RB4 - General-purpose I/O pin
  14. RB5 - General-purpose I/O pin
  15. RB6 - General-purpose I/O pin
  16. RB7 - General-purpose I/O pin
  17. RB8 - General-purpose I/O pin
  18. RB9 - General-purpose I/O pin
  19. RB10 - General-purpose I/O pin
  20. RB11 - General-purpose I/O pin
  21. RB12 - General-purpose I/O pin
  22. RB13 - General-purpose I/O pin
  23. RB14 - General-purpose I/O pin
  24. RB15 - General-purpose I/O pin
  25. VCAP - Capacitor connection for internal voltage regulator
  26. VUSB - USB power supply
  27. AVDD - Analog power supply voltage
  28. AN0 - Analog input channel 0
  29. AN1 - Analog input channel 1
  30. AN2 - Analog input channel 2
  31. AN3 - Analog input channel 3
  32. AN4 - Analog input channel 4
  33. AN5 - Analog input channel 5
  34. AN6 - Analog input channel 6
  35. AN7 - Analog input channel 7

Functional Features

The PIC18LF4410T-I/ML offers a range of functional features that enhance its capabilities in various applications:

  • Flash memory for program storage and easy reprogramming
  • Integrated peripherals such as UART, SPI, and I2C for communication purposes
  • Analog-to-Digital Converter (ADC) for precise analog signal measurements
  • Timers for accurate timing control
  • Low power consumption for energy-efficient operation
  • Wide operating voltage range for flexibility in different power supply scenarios

Advantages and Disadvantages

Advantages

  • High-performance 8-bit architecture for efficient processing
  • Flash memory allows for easy program updates
  • Integrated peripherals simplify system design and reduce external component count
  • Low power consumption extends battery life in portable applications
  • Wide operating voltage range enables compatibility with various power sources

Disadvantages

  • Limited program memory size compared to higher-end microcontrollers
  • Relatively small amount of RAM may restrict complex data manipulation
  • Lack of advanced features found in more specialized microcontrollers

Working Principles

The PIC18LF4410T-I/ML operates based on the principles of a typical microcontroller. It executes instructions stored in its program memory, interacts with external devices through its I/O pins, and utilizes its integrated peripherals to perform specific tasks. The

Lista 10 Vanliga frågor och svar relaterade till tillämpningen av PIC18LF4410T-I/ML i tekniska lösningar

  1. What is the maximum operating frequency of PIC18LF4410T-I/ML?
    - The maximum operating frequency of PIC18LF4410T-I/ML is 40 MHz.

  2. What are the key features of PIC18LF4410T-I/ML?
    - Some key features of PIC18LF4410T-I/ML include 32 KB flash program memory, 256 bytes of EEPROM data memory, and 1.5 KB of RAM.

  3. Can PIC18LF4410T-I/ML be used in automotive applications?
    - Yes, PIC18LF4410T-I/ML is suitable for automotive applications due to its wide operating voltage range and robust design.

  4. What communication interfaces does PIC18LF4410T-I/ML support?
    - PIC18LF4410T-I/ML supports SPI, I2C, and UART communication interfaces.

  5. Is PIC18LF4410T-I/ML suitable for battery-powered devices?
    - Yes, PIC18LF4410T-I/ML is suitable for battery-powered devices due to its low power consumption and sleep modes.

  6. Can PIC18LF4410T-I/ML be used in industrial control systems?
    - Yes, PIC18LF4410T-I/ML is well-suited for industrial control systems due to its robustness and reliability.

  7. What development tools are available for programming PIC18LF4410T-I/ML?
    - Development tools such as MPLAB X IDE and PICkit programmers are available for programming PIC18LF4410T-I/ML.

  8. Does PIC18LF4410T-I/ML have built-in analog-to-digital converters (ADC)?
    - Yes, PIC18LF4410T-I/ML has built-in 10-bit ADC modules for analog signal processing.

  9. Can PIC18LF4410T-I/ML operate in harsh environmental conditions?
    - Yes, PIC18LF4410T-I/ML is designed to operate in harsh environmental conditions with its wide temperature range and robust construction.

  10. Are there any application notes or reference designs available for PIC18LF4410T-I/ML?
    - Yes, Microchip provides application notes and reference designs to help users implement PIC18LF4410T-I/ML in various technical solutions.