Microchip Technology
Bild kan vara representation.
Se specifikationer för produktinformation.
PIC24F08KL402-E/ML
Visa detalj Datablad

PIC24F08KL402-E/ML

Product Overview

Category

The PIC24F08KL402-E/ML belongs to the category of microcontrollers.

Use

This microcontroller is commonly used in various electronic applications that require embedded control and processing capabilities.

Characteristics

  • High-performance 16-bit architecture
  • Low power consumption
  • Enhanced connectivity options
  • Rich set of peripherals
  • Ample memory capacity

Package

The PIC24F08KL402-E/ML is available in a small form factor package, making it suitable for space-constrained designs.

Essence

The essence of this microcontroller lies in its ability to provide efficient and reliable control and processing capabilities for a wide range of applications.

Packaging/Quantity

The PIC24F08KL402-E/ML is typically packaged in trays or tubes, with a quantity of 100 units per package.

Specifications

  • Microcontroller core: 16-bit PIC24F
  • Maximum clock frequency: 32 MHz
  • Flash memory: 8 KB
  • RAM: 512 bytes
  • Operating voltage: 2.0V to 3.6V
  • Number of I/O pins: 28
  • Analog-to-Digital Converter (ADC): 10-bit, 12 channels
  • Serial communication interfaces: UART, SPI, I2C
  • Timers: 16-bit, multiple channels
  • Operating temperature range: -40°C to +85°C

Detailed Pin Configuration

The PIC24F08KL402-E/ML has a total of 28 pins, each serving a specific purpose. The pin configuration is as follows:

  1. VDD - Power supply voltage
  2. VSS - Ground
  3. RA0 - General-purpose I/O pin
  4. RA1 - General-purpose I/O pin
  5. RA2 - General-purpose I/O pin
  6. RA3 - General-purpose I/O pin
  7. RA4 - General-purpose I/O pin
  8. RA5 - General-purpose I/O pin
  9. MCLR - Master Clear input
  10. RB0 - General-purpose I/O pin
  11. RB1 - General-purpose I/O pin
  12. RB2 - General-purpose I/O pin
  13. RB3 - General-purpose I/O pin
  14. RB4 - General-purpose I/O pin
  15. RB5 - General-purpose I/O pin
  16. RB6 - General-purpose I/O pin
  17. RB7 - General-purpose I/O pin
  18. RB8 - General-purpose I/O pin
  19. RB9 - General-purpose I/O pin
  20. RB10 - General-purpose I/O pin
  21. RB11 - General-purpose I/O pin
  22. RB12 - General-purpose I/O pin
  23. RB13 - General-purpose I/O pin
  24. RB14 - General-purpose I/O pin
  25. RB15 - General-purpose I/O pin
  26. VCAP - Capacitor connection for internal voltage regulator
  27. VSS - Ground
  28. VDD - Power supply voltage

Functional Features

The PIC24F08KL402-E/ML offers a range of functional features that enhance its usability and performance:

  • High-speed processing capabilities
  • Flexible digital and analog I/O options
  • Integrated peripherals for various applications
  • Low power consumption modes for energy efficiency
  • Enhanced connectivity options for seamless integration with other devices
  • Robust development tools and software support

Advantages and Disadvantages

Advantages

  • High-performance 16-bit architecture enables efficient processing.
  • Low power consumption extends battery life in portable applications.
  • Rich set of peripherals allows for versatile functionality.
  • Ample memory capacity accommodates complex programs.

Disadvantages

  • Limited I/O pins may restrict the number of external devices that can be connected.
  • Higher cost compared to lower-end microcontrollers with similar specifications.

Working Principles

The PIC24F08KL402-E/ML operates based on the principles of digital logic and microcontroller architecture. It executes instructions stored in its memory, interacts with peripherals, and communicates with external devices to perform desired tasks.

Detailed Application Field Plans

The PIC24F08KL402-E/ML finds applications in various fields, including but not limited to:

  1. Industrial automation: Control systems, motor control, and monitoring devices.
  2. Consumer electronics: Home appliances, gaming consoles, and audio/video equipment.
  3. Automotive: Engine control units, dashboard displays, and infotainment systems.
  4. Medical devices: Patient monitoring systems, diagnostic equipment, and wearable health trackers.
  5. Internet of Things (IoT): Smart home devices, sensor networks, and automation solutions.

Detailed and Complete Alternative Models

  1. PIC24F08KL401-E/ML: Similar to PIC24F08KL402-E/ML but with reduced flash memory capacity (

Lista 10 Vanliga frågor och svar relaterade till tillämpningen av PIC24F08KL402-E/ML i tekniska lösningar

  1. What is the maximum operating frequency of PIC24F08KL402-E/ML?
    - The maximum operating frequency of PIC24F08KL402-E/ML is 32 MHz.

  2. What are the key features of PIC24F08KL402-E/ML?
    - Some key features of PIC24F08KL402-E/ML include 8 KB of flash memory, 512 bytes of RAM, and multiple communication interfaces.

  3. Can PIC24F08KL402-E/ML be used in battery-powered applications?
    - Yes, PIC24F08KL402-E/ML is suitable for battery-powered applications due to its low power consumption features.

  4. What development tools are available for programming PIC24F08KL402-E/ML?
    - Development tools such as MPLAB X IDE and MPLAB XC16 Compiler can be used for programming PIC24F08KL402-E/ML.

  5. Is PIC24F08KL402-E/ML suitable for motor control applications?
    - Yes, PIC24F08KL402-E/ML is well-suited for motor control applications due to its integrated peripherals and high-performance capabilities.

  6. What communication interfaces are supported by PIC24F08KL402-E/ML?
    - PIC24F08KL402-E/ML supports communication interfaces such as UART, SPI, and I2C, making it versatile for various connectivity requirements.

  7. Can PIC24F08KL402-E/ML operate in harsh industrial environments?
    - Yes, PIC24F08KL402-E/ML is designed to operate reliably in harsh industrial environments with its robust features and wide operating temperature range.

  8. Are there any application notes or reference designs available for PIC24F08KL402-E/ML?
    - Yes, Microchip provides application notes and reference designs to assist in the implementation of PIC24F08KL402-E/ML in various technical solutions.

  9. What security features does PIC24F08KL402-E/ML offer?
    - PIC24F08KL402-E/ML provides security features such as code protection and data EEPROM memory for secure storage of sensitive information.

  10. Can PIC24F08KL402-E/ML be used in medical device applications?
    - Yes, PIC24F08KL402-E/ML can be utilized in medical device applications due to its reliability, low power consumption, and support for various sensor interfaces.