Bild kan vara representation.
Se specifikationer för produktinformation.
MT25QU128ABA1ESE-MSIT

MT25QU128ABA1ESE-MSIT

Basic Information Overview

  • Category: Flash Memory
  • Use: Data storage and retrieval in electronic devices
  • Characteristics:
    • High-speed data transfer
    • Non-volatile memory
    • Low power consumption
  • Package: Small Outline Integrated Circuit (SOIC)
  • Essence: Provides reliable and efficient data storage solution
  • Packaging/Quantity: Available in reels, typically 2500 units per reel

Specifications

  • Capacity: 128 Megabits (16 Megabytes)
  • Interface: Serial Peripheral Interface (SPI)
  • Voltage Range: 2.7V to 3.6V
  • Operating Temperature Range: -40°C to +85°C
  • Erase/Program Time: 4ms (typical)
  • Read Speed: Up to 133 MHz

Detailed Pin Configuration

The MT25QU128ABA1ESE-MSIT has a total of 8 pins: 1. Chip Select (/CS) 2. Serial Clock (SCLK) 3. Serial Data Input (SI) 4. Serial Data Output (SO) 5. Hold (/HOLD) 6. Write Protect (/WP) 7. Ground (GND) 8. Power Supply (VCC)

Functional Features

  • High-speed data transfer: The SPI interface allows for fast and efficient data transfer between the flash memory and the host device.
  • Non-volatile memory: The data stored in the MT25QU128ABA1ESE-MSIT is retained even when power is removed, ensuring data integrity.
  • Low power consumption: The flash memory operates at low power levels, making it suitable for battery-powered devices.

Advantages and Disadvantages

Advantages: - Fast data transfer speed - Reliable and durable storage solution - Compact package size - Wide operating temperature range

Disadvantages: - Limited storage capacity compared to other flash memory options - Higher cost per unit compared to lower capacity flash memories

Working Principles

The MT25QU128ABA1ESE-MSIT utilizes the Serial Peripheral Interface (SPI) protocol to communicate with the host device. It stores data in non-volatile memory cells, which can be electrically erased and reprogrammed. The SPI interface allows for high-speed data transfer between the flash memory and the host device.

Detailed Application Field Plans

The MT25QU128ABA1ESE-MSIT is commonly used in various electronic devices that require reliable data storage and retrieval. Some application fields include: - Consumer electronics (e.g., smartphones, tablets) - Automotive systems (e.g., infotainment systems, instrument clusters) - Industrial equipment (e.g., control systems, data loggers) - Networking devices (e.g., routers, switches)

Detailed and Complete Alternative Models

  • MT25QL128ABA1EW9-0SIT: Similar specifications and features, but with a different package (WSON)
  • S25FL128SAGMFI011: Comparable flash memory with similar capacity and interface, offered by a different manufacturer (Spansion)
  • W25Q128JVSIQ: Alternative flash memory with comparable specifications and features, offered by another manufacturer (Winbond)

Note: This entry provides an overview of the MT25QU128ABA1ESE-MSIT flash memory, including its basic information, specifications, pin configuration, functional features, advantages and disadvantages, working principles, application field plans, and alternative models.

Lista 10 Vanliga frågor och svar relaterade till tillämpningen av MT25QU128ABA1ESE-MSIT i tekniska lösningar

Sure! Here are 10 common questions and answers related to the application of MT25QU128ABA1ESE-MSIT in technical solutions:

Q1: What is the capacity of the MT25QU128ABA1ESE-MSIT memory chip? A1: The MT25QU128ABA1ESE-MSIT is a 128 megabit (16 megabyte) memory chip.

Q2: What is the interface protocol supported by the MT25QU128ABA1ESE-MSIT? A2: The MT25QU128ABA1ESE-MSIT supports the Serial Peripheral Interface (SPI) protocol.

Q3: What is the operating voltage range for the MT25QU128ABA1ESE-MSIT? A3: The MT25QU128ABA1ESE-MSIT operates at a voltage range of 2.7V to 3.6V.

Q4: What is the maximum clock frequency supported by the MT25QU128ABA1ESE-MSIT? A4: The MT25QU128ABA1ESE-MSIT supports a maximum clock frequency of 133 MHz.

Q5: Can the MT25QU128ABA1ESE-MSIT be used for code execution in microcontrollers? A5: Yes, the MT25QU128ABA1ESE-MSIT can be used for code execution in microcontrollers due to its fast read access time.

Q6: Is the MT25QU128ABA1ESE-MSIT suitable for data storage in embedded systems? A6: Absolutely, the MT25QU128ABA1ESE-MSIT is commonly used for data storage in various embedded systems.

Q7: Does the MT25QU128ABA1ESE-MSIT support hardware write protection? A7: Yes, the MT25QU128ABA1ESE-MSIT provides hardware write protection features to prevent accidental data modification.

Q8: Can the MT25QU128ABA1ESE-MSIT be used in automotive applications? A8: Yes, the MT25QU128ABA1ESE-MSIT is designed to meet the stringent requirements of automotive applications.

Q9: What is the temperature range within which the MT25QU128ABA1ESE-MSIT can operate? A9: The MT25QU128ABA1ESE-MSIT has an extended temperature range of -40°C to +105°C.

Q10: Is the MT25QU128ABA1ESE-MSIT compatible with other SPI flash memory devices? A10: Yes, the MT25QU128ABA1ESE-MSIT is compatible with other SPI flash memory devices, allowing for easy integration into existing systems.

Please note that these answers are based on general information about the MT25QU128ABA1ESE-MSIT and may vary depending on specific implementation details.