Micron Technology Inc.
Bild kan vara representation.
Se specifikationer för produktinformation.
NAND16GW3B6DPA6E

NAND16GW3B6DPA6E

Basic Information Overview

  • Category: Electronic Component
  • Use: Data Storage
  • Characteristics: Non-volatile, High-density, Fast Read/Write Speed
  • Package: BGA (Ball Grid Array)
  • Essence: NAND Flash Memory
  • Packaging/Quantity: Single unit

Specifications

  • Capacity: 16GB
  • Interface: Parallel
  • Voltage Supply: 3.3V
  • Organization: 8 bits x 2,048 blocks x 64 pages
  • Page Size: 2,112 bytes
  • Block Size: 128 pages
  • Operating Temperature Range: -40°C to +85°C

Detailed Pin Configuration

The NAND16GW3B6DPA6E has the following pin configuration:

| Pin Number | Pin Name | Description | |------------|----------|-------------| | 1 | VCC | Power Supply (3.3V) | | 2 | GND | Ground | | 3 | A0-A18 | Address Inputs | | 4 | CE | Chip Enable | | 5 | CLE | Command Latch Enable | | 6 | WE | Write Enable | | 7 | RE | Read Enable | | 8 | R/B | Ready/Busy Status | | 9 | DQ0-DQ15 | Data Input/Output |

Functional Features

  • High-speed data transfer
  • Reliable and durable storage
  • Low power consumption
  • Error correction capability
  • Wear-leveling algorithm for extended lifespan
  • Bad block management

Advantages

  • Large storage capacity
  • Fast read/write speed
  • Compact package size
  • Wide operating temperature range
  • Suitable for various applications

Disadvantages

  • Limited endurance compared to other memory technologies
  • Higher cost per gigabyte compared to HDDs

Working Principles

The NAND16GW3B6DPA6E is based on NAND flash memory technology. It stores data in a series of memory cells organized in a grid-like structure. Each cell can store multiple bits of information by varying the voltage level applied to it. The data can be read from or written to the memory cells using specific commands and addresses.

Detailed Application Field Plans

The NAND16GW3B6DPA6E is widely used in various electronic devices, including: 1. Smartphones and tablets 2. Solid-state drives (SSDs) 3. Digital cameras 4. Portable media players 5. Industrial control systems 6. Automotive electronics

Detailed and Complete Alternative Models

  1. NAND32GW3B6DPA6E - 32GB capacity, same specifications as NAND16GW3B6DPA6E
  2. NAND64GW3B6DPA6E - 64GB capacity, same specifications as NAND16GW3B6DPA6E
  3. NAND128GW3B6DPA6E - 128GB capacity, same specifications as NAND16GW3B6DPA6E

Note: There are several alternative models available with different capacities but similar specifications.

This entry provides an overview of the NAND16GW3B6DPA6E, including its basic information, specifications, pin configuration, functional features, advantages, disadvantages, working principles, application field plans, and alternative models.

Lista 10 Vanliga frågor och svar relaterade till tillämpningen av NAND16GW3B6DPA6E i tekniska lösningar

Sure! Here are 10 common questions and answers related to the application of NAND16GW3B6DPA6E in technical solutions:

  1. Q: What is NAND16GW3B6DPA6E? A: NAND16GW3B6DPA6E is a specific model of NAND flash memory chip with a capacity of 16GB.

  2. Q: What are some common applications for NAND16GW3B6DPA6E? A: NAND16GW3B6DPA6E is commonly used in various electronic devices such as smartphones, tablets, digital cameras, and solid-state drives (SSDs).

  3. Q: What is the interface used by NAND16GW3B6DPA6E? A: NAND16GW3B6DPA6E uses a standard NAND flash interface, typically either Serial Peripheral Interface (SPI) or Universal Flash Storage (UFS).

  4. Q: What is the operating voltage range for NAND16GW3B6DPA6E? A: The operating voltage range for NAND16GW3B6DPA6E is typically between 2.7V and 3.6V.

  5. Q: What is the data transfer rate of NAND16GW3B6DPA6E? A: The data transfer rate of NAND16GW3B6DPA6E depends on the specific implementation and interface used, but it can typically achieve speeds of several hundred megabytes per second.

  6. Q: Can NAND16GW3B6DPA6E be used for booting an operating system? A: Yes, NAND16GW3B6DPA6E can be used as a boot device for embedded systems and other devices that require non-volatile storage for booting.

  7. Q: Is NAND16GW3B6DPA6E resistant to shock and vibration? A: NAND16GW3B6DPA6E is designed to be resistant to shock and vibration, making it suitable for use in rugged environments.

  8. Q: Can NAND16GW3B6DPA6E be used for data storage in industrial applications? A: Yes, NAND16GW3B6DPA6E is commonly used for data storage in industrial applications due to its reliability and durability.

  9. Q: Does NAND16GW3B6DPA6E support error correction codes (ECC)? A: Yes, NAND16GW3B6DPA6E typically supports various ECC algorithms to ensure data integrity and reliability.

  10. Q: What is the lifespan of NAND16GW3B6DPA6E? A: The lifespan of NAND16GW3B6DPA6E depends on various factors such as usage patterns and operating conditions, but it can typically last for several years under normal use.

Please note that the specific details and specifications may vary depending on the manufacturer and implementation of NAND16GW3B6DPA6E.