Microsemi Corporation
Bild kan vara representation.
Se specifikationer för produktinformation.
1N5242BDO35
Visa detalj Datablad

1N5242BDO35 Encyclopedia Entry

Product Overview

The 1N5242BDO35 belongs to the category of Zener diodes, which are widely used in electronic circuits for voltage regulation and protection. These diodes exhibit specific electrical characteristics that make them suitable for various applications. The 1N5242BDO35 is known for its precise voltage regulation, making it an essential component in many electronic devices.

Basic Information

  • Category: Zener Diode
  • Use: Voltage regulation and protection in electronic circuits
  • Characteristics: Precise voltage regulation, low impedance, and high reliability
  • Package: DO-35
  • Essence: Regulating voltage and protecting electronic components
  • Packaging/Quantity: Typically available in reels or tubes containing multiple units

Specifications

  • Voltage: 12V
  • Power Dissipation: 500mW
  • Zener Voltage Tolerance: ±5%
  • Operating Temperature Range: -65°C to +200°C

Detailed Pin Configuration

The 1N5242BDO35 Zener diode has two pins, with the cathode identified by a band around one end of the diode body. The pin configuration is as follows: - Pin 1: Anode - Pin 2: Cathode

Functional Features

  • Precise voltage regulation under specified conditions
  • Low impedance, allowing for efficient current flow
  • High reliability and stability over a wide temperature range

Advantages and Disadvantages

Advantages

  • Provides accurate voltage regulation
  • Low impedance ensures minimal power loss
  • Reliable performance across varying temperatures

Disadvantages

  • Limited to specific voltage regulation applications
  • Sensitive to excessive current and voltage spikes

Working Principles

The 1N5242BDO35 Zener diode operates based on the principle of the Zener effect, where it maintains a constant voltage drop across its terminals when reverse-biased. This allows it to regulate the voltage in a circuit, preventing it from exceeding the specified value.

Detailed Application Field Plans

The 1N5242BDO35 Zener diode finds extensive use in various electronic applications, including: - Voltage regulation in power supplies - Overvoltage protection in electronic circuits - Signal clamping and limiting in communication systems - Voltage reference in precision measurement equipment

Detailed and Complete Alternative Models

  • 1N5239BDO35 (9.1V Zener diode)
  • 1N5240BDO35 (10V Zener diode)
  • 1N5241BDO35 (11V Zener diode)
  • 1N5243BDO35 (13V Zener diode)

In conclusion, the 1N5242BDO35 Zener diode is a crucial component in electronic circuits, providing precise voltage regulation and protection. Its unique characteristics and reliable performance make it an indispensable part of various electronic devices and systems.

[Word Count: 411]

Lista 10 Vanliga frågor och svar relaterade till tillämpningen av 1N5242BDO35 i tekniska lösningar

  1. What is the voltage rating of 1N5242BDO35?

    • The voltage rating of 1N5242BDO35 is 35 volts.

  2. What is the maximum current it can handle?

    • The maximum current it can handle is typically around 150 mA.

  3. What are the typical applications for 1N5242BDO35?

    • It is commonly used in voltage regulation, overvoltage protection, and general purpose diode applications.

  4. Is 1N5242BDO35 suitable for use in automotive electronics?

    • Yes, it can be used in automotive electronics for various voltage regulation and protection purposes.

  5. Can 1N5242BDO35 be used in power supply designs?

    • Yes, it can be used in low-power or signal-level power supply designs.

  6. What is the temperature range for 1N5242BDO35?

    • The operating temperature range is typically -65°C to +200°C.

  7. Does 1N5242BDO35 require a heat sink for certain applications?

    • For high current applications or when operating close to the maximum temperature, a heat sink may be necessary.

  8. Is 1N5242BDO35 suitable for use in battery charging circuits?

    • Yes, it can be used in battery charging circuits for voltage regulation and protection.

  9. What are the key electrical characteristics of 1N5242BDO35?

    • Key characteristics include forward voltage drop, reverse leakage current, and maximum power dissipation.

  10. Are there any common failure modes associated with 1N5242BDO35?

    • Common failure modes include overcurrent damage, thermal runaway, and voltage breakdown under excessive stress conditions.