Microsemi Corporation
Bild kan vara representation.
Se specifikationer för produktinformation.
5KP51CE3/TR13
Visa detalj Datablad

5KP51CE3/TR13 Product Overview

Introduction

The 5KP51CE3/TR13 is a high-performance transient voltage suppressor (TVS) diode designed to protect electronic circuits from voltage transients and surges. This entry provides a comprehensive overview of the product, including its basic information, specifications, pin configuration, functional features, advantages and disadvantages, working principles, application field plans, and alternative models.

Basic Information Overview

  • Category: Electronic Components
  • Use: Protection against voltage transients and surges in electronic circuits
  • Characteristics: High surge capability, low clamping voltage, fast response time
  • Package: DO-201AD (DO-27)
  • Essence: TVS diode for circuit protection
  • Packaging/Quantity: Available in tape and reel packaging, quantity varies by manufacturer

Specifications

  • Peak Power Dissipation: 5000W
  • Breakdown Voltage Range: 45.2V to 56.6V
  • Operating Temperature Range: -55°C to +175°C
  • Reverse Standoff Voltage: 40.8V
  • Maximum Clamping Voltage: 65.3V
  • RoHS Compliant: Yes

Detailed Pin Configuration

The 5KP51CE3/TR13 TVS diode has a standard DO-201AD package with two leads. The anode is connected to the positive side of the circuit, while the cathode is connected to the ground or negative side.

Functional Features

  • Transient Voltage Suppression: Provides robust protection against voltage spikes and surges.
  • Fast Response Time: Quickly clamps transient voltages to safe levels, protecting downstream components.
  • High Surge Capability: Can handle large transient currents without degradation.

Advantages and Disadvantages

Advantages

  • Effective protection against voltage transients
  • Fast response time
  • RoHS compliant

Disadvantages

  • Higher cost compared to standard diodes
  • Requires careful consideration of placement in circuit design

Working Principles

When a voltage transient occurs, the TVS diode conducts current to divert the excess energy away from sensitive components. It rapidly clamps the voltage to a safe level, preventing damage to the circuit.

Detailed Application Field Plans

The 5KP51CE3/TR13 is widely used in various applications, including: - Power supplies - Automotive electronics - Industrial control systems - Telecommunication equipment - Consumer electronics

Detailed and Complete Alternative Models

  • 5KP45A: Lower breakdown voltage variant
  • 5KP56A: Higher breakdown voltage variant
  • P6KE51CA: Axial lead TVS diode alternative
  • 1.5KE51CA: Transient voltage suppressor with different package style

In conclusion, the 5KP51CE3/TR13 TVS diode offers reliable protection against voltage transients and surges, making it an essential component in modern electronic circuits across various industries.

Word Count: 410

Lista 10 Vanliga frågor och svar relaterade till tillämpningen av 5KP51CE3/TR13 i tekniska lösningar

  1. What is 5KP51CE3/TR13 and what is its application in technical solutions?

    • 5KP51CE3/TR13 is a transient voltage suppressor diode used to protect electronic circuits from overvoltage transients. It is commonly applied in technical solutions to safeguard sensitive components from voltage spikes.

  2. How does 5KP51CE3/TR13 provide protection in technical solutions?

    • 5KP51CE3/TR13 operates by diverting excessive voltage away from the protected circuit, thereby preventing damage to the connected components.

  3. What are the key specifications of 5KP51CE3/TR13 that make it suitable for technical solutions?

    • The key specifications include a high surge capability, low clamping voltage, and fast response time, making it ideal for protecting sensitive electronics in technical applications.

  4. In what types of technical solutions is 5KP51CE3/TR13 commonly used?

    • 5KP51CE3/TR13 is frequently employed in power supplies, communication equipment, industrial controls, and automotive electronics to provide overvoltage protection.

  5. What are the environmental considerations when using 5KP51CE3/TR13 in technical solutions?

    • When integrating 5KP51CE3/TR13 into technical solutions, it's important to consider factors such as operating temperature range, humidity, and compliance with environmental regulations.

  6. How can 5KP51CE3/TR13 be integrated into a technical solution effectively?

    • Proper PCB layout, appropriate mounting techniques, and ensuring adequate thermal management are essential for effective integration of 5KP51CE3/TR13 in technical solutions.

  7. What are the potential failure modes of 5KP51CE3/TR13 in technical solutions?

    • Common failure modes include degradation due to prolonged exposure to high currents or overvoltage events, as well as thermal stress under extreme operating conditions.

  8. Are there any design considerations specific to using 5KP51CE3/TR13 in technical solutions?

    • Designers should consider factors such as transient energy levels, peak pulse current ratings, and the impact of parasitic elements when incorporating 5KP51CE3/TR13 into technical solutions.

  9. What are the best practices for testing 5KP51CE3/TR13 in technical solutions?

    • Testing should include verification of clamping voltage, response time, and surge handling capabilities to ensure the proper functioning of 5KP51CE3/TR13 in technical applications.

  10. Where can I find additional resources and support for implementing 5KP51CE3/TR13 in technical solutions?

    • Manufacturers' datasheets, application notes, and technical support from suppliers are valuable resources for guidance on integrating 5KP51CE3/TR13 into technical solutions.