Microsemi Corporation
Bild kan vara representation.
Se specifikationer för produktinformation.
JANTXV1N6110AUS
Visa detalj Datablad

JANTXV1N6110AUS

Product Overview

Category

The JANTXV1N6110AUS belongs to the category of semiconductor devices, specifically a diode.

Use

This diode is commonly used in electronic circuits for rectification and voltage regulation purposes.

Characteristics

  • Forward Voltage: 0.7V
  • Reverse Voltage: 100V
  • Current Rating: 1A
  • Fast Switching Speed
  • Low Leakage Current

Package

The JANTXV1N6110AUS is typically available in a DO-41 package, which is a cylindrical axial-lead package.

Packaging/Quantity

It is usually supplied in reels or tubes with varying quantities, depending on the supplier.

Specifications

  • Maximum Forward Voltage Drop: 0.7V
  • Maximum Reverse Voltage: 100V
  • Average Rectified Current: 1A
  • Peak Surge Current: 30A
  • Operating Temperature Range: -65°C to +175°C

Detailed Pin Configuration

The JANTXV1N6110AUS has two leads, an anode, and a cathode. The anode is connected to the positive side of the circuit, while the cathode is connected to the negative side.

Functional Features

  • High reliability and ruggedness
  • Fast recovery time
  • Low forward voltage drop
  • Excellent surge current capability

Advantages and Disadvantages

Advantages

  • High reliability
  • Fast recovery time
  • Low forward voltage drop

Disadvantages

  • Limited maximum reverse voltage compared to some other diodes
  • Sensitive to temperature variations

Working Principles

The JANTXV1N6110AUS operates based on the principle of unidirectional conduction, allowing current to flow in only one direction. When a positive voltage is applied to the anode with respect to the cathode, the diode conducts, allowing current to flow. In the reverse bias condition, the diode blocks the current flow.

Detailed Application Field Plans

The JANTXV1N6110AUS finds extensive use in various electronic applications, including: - Power supplies - Voltage regulators - Rectifiers in AC-to-DC converters - Snubber circuits - Overvoltage protection circuits

Detailed and Complete Alternative Models

Some alternative models to the JANTXV1N6110AUS include: - 1N4001 - 1N4004 - 1N5408 - FR107 - 1N5819

In conclusion, the JANTXV1N6110AUS diode offers reliable performance in rectification and voltage regulation applications, making it a popular choice in the electronics industry.

[Word Count: 366]

Lista 10 Vanliga frågor och svar relaterade till tillämpningen av JANTXV1N6110AUS i tekniska lösningar

  1. What is the JANTXV1N6110AUS component used for?

    • The JANTXV1N6110AUS is a high-reliability, military-grade diode designed for use in critical applications where reliability and performance are essential.

  2. What are the key specifications of the JANTXV1N6110AUS?

    • The JANTXV1N6110AUS is a 1500W transient voltage suppressor diode with a breakdown voltage of 6.8V and a low clamping voltage.

  3. In what type of technical solutions is the JANTXV1N6110AUS commonly used?

    • The JANTXV1N6110AUS is commonly used in aerospace, defense, and other high-reliability applications where protection against voltage transients is crucial.

  4. How does the JANTXV1N6110AUS provide protection in electronic circuits?

    • The JANTXV1N6110AUS acts as a voltage clamp, diverting excess current away from sensitive components when voltage spikes occur, thus protecting the circuitry.

  5. What are the temperature and environmental considerations for using the JANTXV1N6110AUS?

    • The JANTXV1N6110AUS is designed to operate over a wide temperature range and is capable of withstanding harsh environmental conditions typically found in military and aerospace applications.

  6. Are there any specific handling or installation requirements for the JANTXV1N6110AUS?

    • Proper ESD (electrostatic discharge) precautions should be taken during handling and installation to prevent damage to the diode.

  7. Can the JANTXV1N6110AUS be used in commercial applications?

    • While it is primarily designed for military and aerospace applications, the JANTXV1N6110AUS can also be used in commercial applications where high reliability is required.

  8. What are the potential failure modes of the JANTXV1N6110AUS?

    • Common failure modes include overstress due to excessive voltage or current, as well as thermal damage from improper heat dissipation.

  9. Does the JANTXV1N6110AUS require any special testing or qualification before use?

    • As a military-grade component, the JANTXV1N6110AUS may require specific testing and qualification procedures to ensure its reliability and performance in the intended application.

  10. Where can I find detailed technical documentation for the JANTXV1N6110AUS?

    • Detailed technical documentation, including datasheets and application notes, for the JANTXV1N6110AUS can be obtained from the manufacturer or authorized distributors.