Microsemi Corporation
Bild kan vara representation.
Se specifikationer för produktinformation.
MP6KE130AE3
Visa detalj Datablad

MP6KE130AE3

Product Overview

  • Category: TVS Diode
  • Use: Protection against voltage transients in electronic circuits
  • Characteristics: Fast response time, low clamping voltage, high surge current capability
  • Package: DO-15
  • Essence: Provides robust protection for sensitive electronic components
  • Packaging/Quantity: Available in reels of 1000 units

Specifications

  • Peak Pulse Power: 600W
  • Breakdown Voltage: 130V
  • Clamping Voltage: 209V
  • Peak Pulse Current: 10A
  • Operating Temperature Range: -55°C to +175°C

Detailed Pin Configuration

The MP6KE130AE3 TVS diode has a standard DO-15 package with two leads. The anode is connected to the positive side of the circuit, while the cathode is connected to the ground.

Functional Features

  • Transient Voltage Suppression: Quickly diverts excessive voltage away from sensitive components.
  • Fast Response Time: Reacts to transient events within nanoseconds, protecting the circuitry.
  • Low Clamping Voltage: Limits the voltage across the protected component during a transient event.

Advantages and Disadvantages

Advantages

  • Effective protection against voltage transients
  • Fast response time
  • Low clamping voltage

Disadvantages

  • Limited peak pulse power compared to some higher-rated TVS diodes
  • Requires careful consideration of placement in the circuit for optimal performance

Working Principles

When a transient voltage spike occurs, the TVS diode conducts and shunts the excess energy to the ground, protecting the downstream components. The fast response time ensures that the voltage spike is limited before it can cause damage.

Detailed Application Field Plans

The MP6KE130AE3 is commonly used in various electronic devices and systems, including: - Power supplies - Communication equipment - Automotive electronics - Industrial control systems

Detailed and Complete Alternative Models

  • P6KE130CA: Similar specifications and package type
  • 1.5KE130A: Higher peak pulse power and clamping voltage

Note: The alternative models listed above are for reference purposes and may require additional evaluation based on specific application requirements.

This comprehensive entry provides detailed information about the MP6KE130AE3 TVS diode, including its specifications, functional features, advantages, and application field plans.

Lista 10 Vanliga frågor och svar relaterade till tillämpningen av MP6KE130AE3 i tekniska lösningar

  1. What is the maximum peak pulse power of MP6KE130AE3?

    • The maximum peak pulse power of MP6KE130AE3 is 600 watts.

  2. What is the breakdown voltage of MP6KE130AE3?

    • The breakdown voltage of MP6KE130AE3 is 117V.

  3. What is the typical clamping voltage of MP6KE130AE3?

    • The typical clamping voltage of MP6KE130AE3 is 188V at 10A.

  4. What are the typical applications of MP6KE130AE3?

    • MP6KE130AE3 is commonly used in surge protection for sensitive electronics, such as telecommunications equipment, industrial controls, and automotive systems.

  5. What is the operating temperature range of MP6KE130AE3?

    • The operating temperature range of MP6KE130AE3 is -55°C to +175°C.

  6. What is the packaging type of MP6KE130AE3?

    • MP6KE130AE3 is available in a DO-15 package.

  7. What is the reverse stand-off voltage of MP6KE130AE3?

    • The reverse stand-off voltage of MP6KE130AE3 is 130V.

  8. Is MP6KE130AE3 RoHS compliant?

    • Yes, MP6KE130AE3 is RoHS compliant.

  9. What is the response time of MP6KE130AE3?

    • The response time of MP6KE130AE3 is typically less than 1 picosecond.

  10. Does MP6KE130AE3 require any special handling during assembly?

    • MP6KE130AE3 should be handled using standard ESD precautions during assembly to prevent damage to the device.