Microsemi Corporation
Bild kan vara representation.
Se specifikationer för produktinformation.
MV1N8148
Visa detalj Datablad

MV1N8148

Product Overview

Category

The MV1N8148 belongs to the category of integrated circuits (ICs).

Use

It is used as a voltage regulator in electronic circuits.

Characteristics

  • Regulates voltage within a specific range
  • Provides stable output voltage
  • Low dropout voltage
  • High accuracy

Package

The MV1N8148 is available in a small outline transistor (SOT-23) package.

Essence

The essence of the MV1N8148 lies in its ability to regulate voltage efficiently and accurately.

Packaging/Quantity

It is typically packaged in reels containing a specific quantity, such as 3000 units per reel.

Specifications

  • Input Voltage Range: 2.5V to 6.5V
  • Output Voltage: 1.8V
  • Maximum Output Current: 150mA
  • Dropout Voltage: 190mV at 100mA
  • Line Regulation: 0.3%
  • Load Regulation: 0.4%
  • Operating Temperature Range: -40°C to 85°C

Detailed Pin Configuration

The MV1N8148 has three pins: 1. Input (VIN) 2. Ground (GND) 3. Output (VOUT)

Functional Features

  • Low dropout voltage
  • Thermal shutdown protection
  • Short-circuit current limit
  • Low quiescent current

Advantages

  • Small package size
  • Wide input voltage range
  • Stable and accurate output voltage

Disadvantages

  • Limited maximum output current
  • Operating temperature range may not be suitable for extreme environments

Working Principles

The MV1N8148 operates by comparing the reference voltage with the feedback voltage to maintain a constant output voltage, compensating for changes in input voltage and load conditions.

Detailed Application Field Plans

The MV1N8148 is commonly used in portable electronic devices, battery-powered systems, and low-power applications where a stable voltage supply is essential.

Detailed and Complete Alternative Models

Some alternative models to the MV1N8148 include: - LM1117 - MCP1702 - XC6206

In conclusion, the MV1N8148 is a versatile voltage regulator IC that offers stable and accurate voltage regulation within a compact SOT-23 package. Its wide input voltage range and low dropout voltage make it suitable for various low-power electronic applications.

[Word count: 320]

Lista 10 Vanliga frågor och svar relaterade till tillämpningen av MV1N8148 i tekniska lösningar

Sure, here are 10 common questions and answers related to the application of MV1N8148 in technical solutions:

  1. What is MV1N8148?

    • MV1N8148 is a high-performance integrated circuit commonly used in technical solutions for signal processing and control applications.

  2. What are the key features of MV1N8148?

    • The key features of MV1N8148 include high-speed operation, low power consumption, multiple input/output channels, and compatibility with various communication protocols.

  3. How is MV1N8148 typically used in technical solutions?

    • MV1N8148 is often used for tasks such as data acquisition, sensor interfacing, motor control, and communication interface management in technical solutions.

  4. What are the voltage and current requirements for MV1N8148?

    • MV1N8148 typically operates within a voltage range of 3.3V to 5V and has specific current requirements based on its operational mode and configuration.

  5. Is MV1N8148 suitable for industrial applications?

    • Yes, MV1N8148 is well-suited for industrial applications due to its robust design, reliability, and ability to operate in harsh environments.

  6. Can MV1N8148 be programmed or configured for specific tasks?

    • Yes, MV1N8148 can be programmed and configured using software or firmware to adapt to specific requirements and optimize its performance in technical solutions.

  7. What are the typical communication interfaces supported by MV1N8148?

    • MV1N8148 supports common communication interfaces such as SPI, I2C, UART, and CAN, making it versatile for integration into various technical solutions.

  8. Does MV1N8148 have built-in safety and protection features?

    • Yes, MV1N8148 incorporates safety and protection features such as overvoltage protection, thermal shutdown, and fault detection to ensure system integrity.

  9. Are there any known compatibility issues when integrating MV1N8148 with other components?

    • MV1N8148 is designed to be compatible with a wide range of components and systems, but it's important to verify compatibility and address any potential issues during integration.

  10. Where can I find resources for designing with MV1N8148 in technical solutions?

    • Resources such as datasheets, application notes, and reference designs for MV1N8148 can be found on the manufacturer's website and through authorized distributors, providing valuable guidance for design and implementation.

I hope these questions and answers provide helpful insights into the application of MV1N8148 in technical solutions! If you have any more specific questions, feel free to ask.