Encyclopedia Entry: 74ACTQ16245MTD

Product Overview

Use

This IC is commonly used for signal transmission and level shifting in digital electronic systems.

Characteristics

High-speed operation
Low power consumption
Wide operating voltage range
Compatibility with TTL input/output levels
Bidirectional data flow capability

Package

The 74ACTQ16245MTD is available in a small outline integrated circuit (SOIC) package.

Essence

The essence of this product lies in its ability to efficiently transmit digital signals while ensuring compatibility between different logic families.

Packaging/Quantity

The 74ACTQ16245MTD is typically packaged in reels or tubes, containing a quantity of 250 units per package.

Specifications

Supply Voltage Range: 2.0V to 6.0V
Input Voltage Range: 0V to VCC
Output Voltage Range: 0V to VCC
Operating Temperature Range: -40°C to +85°C
Propagation Delay Time: 5.5ns (typical)
Output Current: ±24mA

Detailed Pin Configuration

The 74ACTQ16245MTD has a total of 48 pins, arranged as follows:

``` ┌───┐ ┌───┐ B1 -- │ │ -- A1 │ │ -- B2 A2 -- │ │ -- GND │ │ -- A2 B3 -- │ │ -- Y1 │ │ -- B4 A4 -- │ │ -- VCC │ │ -- A3 B5 -- │ │ -- Y2 │ │ -- B6 A6 -- │ │ -- GND │ │ -- A5 B7 -- │ │ -- Y3 │ │ -- B8 A8 -- │ │ -- VCC │ │ -- A7 B9 -- │ │ -- Y4 │ │ -- B10 A10 -- │ │ -- GND │ │ -- A9 B11 -- │ │ -- Y5 │ │ -- B12 A12 -- │ │ -- VCC │ │ -- A11 B13 -- │ │ -- Y6 │ │ -- B14 A14 -- │ │ -- GND │ │ -- A13 B15 -- │ │ -- Y7 │ │ -- B16 A16 -- │ │ -- VCC │ │ -- A15 B17 -- │ │ -- Y8 │ │ -- B18 A18 -- │ │ -- GND │ │ -- A17 B19 -- │ │ -- Y9 │ │ -- B20 A20 -- │ │ -- VCC │ │ -- A19 B21 -- │ │ -- Y10 │ │ -- B22 A22 -- │ │ -- GND │ │ -- A21 B23 -- │ │ -- Y11 │ │ -- B24 A24 -- │ │ -- VCC │ │ -- A23 B25 -- │ │ -- Y12 │ │ -- B26 A26 -- │ │ -- GND │ │ -- A25 B27 -- │ │ -- Y13 │ │ -- B28 A28 -- │ │ -- VCC │ │ -- A27 B29 -- │ │ -- Y14 │ │ -- B30 A30 -- │ │ -- GND │ │ -- A29 B31 -- │ │ -- Y15 │ │ -- B32 A32 -- │ │ -- VCC │ │ -- A31 B33 -- │ │ -- Y16 │ │ -- B34 A34 -- │ │ -- GND │ │ -- A33 B35 -- │ │

Lista 10 Vanliga frågor och svar relaterade till tillämpningen av 74ACTQ16245MTD i tekniska lösningar

Sure! Here are 10 common questions and answers related to the application of 74ACTQ16245MTD in technical solutions:

Question: What is the function of the 74ACTQ16245MTD?
Answer: The 74ACTQ16245MTD is a 16-bit transceiver with 3-state outputs, used for bidirectional data transfer between two buses.
Question: What is the voltage range supported by the 74ACTQ16245MTD?
Answer: The 74ACTQ16245MTD supports a voltage range of 2.0V to 5.5V.
Question: How many channels does the 74ACTQ16245MTD have?
Answer: The 74ACTQ16245MTD has 16 channels, allowing for simultaneous bidirectional data transfer on each channel.
Question: Can the 74ACTQ16245MTD be used in high-speed applications?
Answer: Yes, the 74ACTQ16245MTD is designed for high-speed operation, making it suitable for applications that require fast data transfer.
Question: What is the maximum data rate supported by the 74ACTQ16245MTD?
Answer: The 74ACTQ16245MTD can support data rates up to 400Mbps.
Question: Does the 74ACTQ16245MTD have built-in protection features?
Answer: Yes, the 74ACTQ16245MTD has built-in ESD protection, which helps safeguard against electrostatic discharge.
Question: Can the 74ACTQ16245MTD be used in both parallel and serial communication systems?
Answer: Yes, the 74ACTQ16245MTD can be used in both parallel and serial communication systems, depending on the application requirements.
Question: What is the power supply voltage required for the 74ACTQ16245MTD?
Answer: The 74ACTQ16245MTD requires a power supply voltage of 2.0V to 5.5V.
Question: Can the 74ACTQ16245MTD be used in automotive applications?
Answer: Yes, the 74ACTQ16245MTD is AEC-Q100 qualified, making it suitable for use in automotive applications.
Question: Are there any specific layout considerations for using the 74ACTQ16245MTD?
Answer: Yes, it is recommended to follow the layout guidelines provided in the datasheet to ensure proper signal integrity and minimize noise interference.

Please note that these answers are general and may vary based on specific application requirements. It is always recommended to refer to the datasheet and consult with technical experts for accurate information.