ON Semiconductor
Bild kan vara representation.
Se specifikationer för produktinformation.
74F245SC
Visa detalj Datablad

Encyclopedia Entry: 74F245SC

Product Overview

Category

The 74F245SC belongs to the category of integrated circuits (ICs) and specifically falls under the family of bus transceivers.

Use

This IC is primarily used for bidirectional data transfer between different buses or systems. It enables the exchange of data between two separate buses, allowing seamless communication.

Characteristics

  • Bidirectional data transfer
  • High-speed operation
  • Low power consumption
  • Wide operating voltage range
  • Robust design for noise immunity

Package

The 74F245SC is available in a standard 20-pin small outline integrated circuit (SOIC) package. This package offers compactness and ease of integration into various electronic systems.

Essence

The essence of the 74F245SC lies in its ability to facilitate efficient and reliable data transfer between different buses, ensuring smooth communication within complex electronic systems.

Packaging/Quantity

The 74F245SC is typically packaged in reels or tubes, with each reel containing approximately 250 units. The exact packaging and quantity may vary depending on the manufacturer.

Specifications

  • Supply Voltage: 4.5V to 5.5V
  • Operating Temperature Range: -40°C to +85°C
  • Input/Output Compatibility: TTL/CMOS
  • Maximum Data Transfer Rate: 100 MHz
  • Output Drive Capability: ±24 mA

Detailed Pin Configuration

The 74F245SC has a total of 20 pins, each serving a specific function. Here is the detailed pin configuration:

  1. A1: Bus A, Data Input/Output
  2. B1: Bus B, Data Input/Output
  3. A2: Bus A, Data Input/Output
  4. B2: Bus B, Data Input/Output
  5. A3: Bus A, Data Input/Output
  6. B3: Bus B, Data Input/Output
  7. A4: Bus A, Data Input/Output
  8. B4: Bus B, Data Input/Output
  9. GND: Ground
  10. OE: Output Enable
  11. DIR: Direction Control
  12. NC: No Connection
  13. VCC: Power Supply
  14. B5: Bus B, Data Input/Output
  15. A5: Bus A, Data Input/Output
  16. B6: Bus B, Data Input/Output
  17. A6: Bus A, Data Input/Output
  18. B7: Bus B, Data Input/Output
  19. A7: Bus A, Data Input/Output
  20. B8: Bus B, Data Input/Output

Functional Features

  • Bidirectional data transfer between two buses
  • High-speed operation for efficient communication
  • Output enable and direction control for flexible control over data flow
  • TTL/CMOS compatibility for seamless integration with different logic families
  • Robust design for noise immunity, ensuring reliable data transmission

Advantages and Disadvantages

Advantages

  • Enables efficient bidirectional data transfer
  • High-speed operation allows for quick communication
  • Low power consumption for energy-efficient applications
  • Wide operating voltage range provides flexibility in various systems
  • Robust design ensures reliable data transmission even in noisy environments

Disadvantages

  • Limited to 8-bit data transfer
  • Requires careful consideration of bus compatibility and voltage levels

Working Principles

The 74F245SC operates based on the principles of digital logic. It uses internal circuitry to control the direction of data flow between two buses. The output enable (OE) and direction (DIR) pins allow the user to control the data transfer. When the OE pin is active, the IC enables bidirectional data transfer. The DIR pin determines the direction of data flow, either from Bus A to Bus B or vice versa.

Detailed Application Field Plans

The 74F245SC finds applications in various fields where bidirectional data transfer between different buses is required. Some common application areas include:

  1. Microprocessor systems
  2. Data communication networks
  3. Industrial automation
  4. Automotive electronics
  5. Consumer electronics

Detailed and Complete Alternative Models

There are several alternative models available that serve similar functions to the 74F245SC. Some popular alternatives include:

  1. SN74LVC245A: Low-voltage CMOS bus transceiver
  2. CD74HCT245: High-speed CMOS bus transceiver
  3. MC74ACT245: Advanced CMOS bus transceiver
  4. 74HC245: High-speed CMOS bus transceiver

These alternative models offer similar features and functionality, providing flexibility for different design requirements.

In conclusion, the 74F245SC is a versatile integrated circuit used for bidirectional data transfer between buses. Its high-speed operation, low power consumption, and robust design make

Lista 10 Vanliga frågor och svar relaterade till tillämpningen av 74F245SC i tekniska lösningar

Sure! Here are 10 common questions and answers related to the application of 74F245SC in technical solutions:

  1. Q: What is the 74F245SC? A: The 74F245SC is a bidirectional octal bus transceiver with tri-state outputs, commonly used for data transfer between different voltage levels or systems.

  2. Q: What is the maximum operating voltage for the 74F245SC? A: The 74F245SC has a maximum operating voltage of 5.5V.

  3. Q: Can the 74F245SC be used for level shifting between different voltage domains? A: Yes, the 74F245SC is often used for level shifting between different voltage domains, as it can handle both high and low voltage levels.

  4. Q: How many data lines can the 74F245SC handle? A: The 74F245SC can handle up to 8 bidirectional data lines.

  5. Q: Does the 74F245SC support tri-state outputs? A: Yes, the 74F245SC supports tri-state outputs, allowing multiple devices to share a common bus without interfering with each other.

  6. Q: What is the typical propagation delay of the 74F245SC? A: The typical propagation delay of the 74F245SC is around 6-8 nanoseconds.

  7. Q: Can the 74F245SC be used for bus isolation? A: Yes, the 74F245SC can be used for bus isolation, allowing multiple devices to be connected to a shared bus while isolating them when necessary.

  8. Q: Is the 74F245SC compatible with TTL logic levels? A: Yes, the 74F245SC is compatible with TTL logic levels, making it suitable for interfacing with TTL-based systems.

  9. Q: Can the 74F245SC be used in both parallel and serial communication applications? A: Yes, the 74F245SC can be used in both parallel and serial communication applications, depending on the specific requirements of the system.

  10. Q: Are there any special considerations when using the 74F245SC in high-speed applications? A: Yes, in high-speed applications, it is important to consider signal integrity, termination, and proper PCB layout techniques to minimize noise and ensure reliable data transfer.

Please note that these answers are general and may vary based on specific application requirements.