ON Semiconductor
Bild kan vara representation.
Se specifikationer för produktinformation.
FM93C46N
Visa detalj Datablad

FM93C46N

Product Overview

  • Category: Integrated Circuit (IC)
  • Use: Non-volatile Electrically Erasable Programmable Read-Only Memory (EEPROM)
  • Characteristics:
    • Low power consumption
    • High reliability
    • Small package size
  • Package: DIP-8 (Dual In-line Package with 8 pins)
  • Essence: Stores digital information even when power is turned off
  • Packaging/Quantity: Typically sold in reels of 2,500 units

Specifications

  • Memory Size: 1K-bit (128 x 8-bit)
  • Supply Voltage: 2.5V to 5.5V
  • Operating Temperature Range: -40°C to +85°C
  • Write Cycle Time: 5ms (typical)
  • Data Retention: 200 years (typical)

Detailed Pin Configuration

The FM93C46N has a total of 8 pins:

  1. Chip Enable (CE) - Enables the device for read/write operations
  2. Output Enable (OE) - Enables the output data buffer
  3. Write Enable (WE) - Enables write operations
  4. Serial Data Input (DI) - Data input pin for serial communication
  5. Serial Data Output (DO) - Data output pin for serial communication
  6. Clock (CLK) - Provides timing for data transfer
  7. VCC - Power supply voltage
  8. Ground (GND) - Ground reference

Functional Features

  • Non-volatile memory: Retains data even without power
  • Electrically erasable and programmable: Allows for easy modification of stored data
  • Serial communication interface: Supports simple and efficient data transfer
  • Low power consumption: Ideal for battery-powered devices
  • High reliability: Ensures data integrity over extended periods

Advantages and Disadvantages

Advantages: - Small package size allows for space-efficient designs - Low power consumption extends battery life - High reliability ensures data integrity

Disadvantages: - Limited memory size (1K-bit) - Slower write cycle time compared to some other EEPROMs

Working Principles

The FM93C46N is based on EEPROM technology, which utilizes floating-gate transistors to store and retrieve digital information. When a write operation is performed, an electric charge is applied to the floating gate, altering its electrical characteristics and storing the desired data. The stored data can be read by applying appropriate voltage levels to the input pins.

Detailed Application Field Plans

The FM93C46N is commonly used in various electronic devices that require non-volatile memory storage, such as:

  1. Consumer electronics: Used in TVs, set-top boxes, and DVD players for storing user preferences and settings.
  2. Automotive industry: Employed in car audio systems, dashboard displays, and engine control units for data logging and configuration storage.
  3. Industrial automation: Utilized in programmable logic controllers (PLCs) and industrial sensors for storing calibration data and configuration parameters.
  4. Medical devices: Integrated into medical equipment for storing patient data, device settings, and firmware updates.

Detailed and Complete Alternative Models

  1. AT24C02 - 2K-bit EEPROM with similar specifications and pin configuration.
  2. CAT24C01 - 1K-bit EEPROM with extended temperature range (-40°C to +125°C).
  3. M93C46 - 1K-bit EEPROM with SPI interface for faster data transfer.

(Note: This list is not exhaustive and there are several other alternative models available in the market.)

Word count: 442 words

Lista 10 Vanliga frågor och svar relaterade till tillämpningen av FM93C46N i tekniska lösningar

Sure! Here are 10 common questions and answers related to the application of FM93C46N in technical solutions:

  1. Q: What is FM93C46N? A: FM93C46N is a popular serial EEPROM (Electrically Erasable Programmable Read-Only Memory) chip used for non-volatile data storage in various electronic devices.

  2. Q: What is the storage capacity of FM93C46N? A: FM93C46N has a storage capacity of 1 kilobit (128 bytes) organized into 64 words of 16 bits each.

  3. Q: How is FM93C46N interfaced with microcontrollers or other devices? A: FM93C46N uses a simple 3-wire SPI (Serial Peripheral Interface) protocol for communication with microcontrollers or other devices.

  4. Q: Can FM93C46N be used for storing user settings or configuration data? A: Yes, FM93C46N is commonly used for storing user settings, configuration data, calibration values, or small amounts of non-volatile memory required by the system.

  5. Q: What is the operating voltage range of FM93C46N? A: FM93C46N operates within a voltage range of 2.5V to 5.5V, making it compatible with a wide range of systems.

  6. Q: Is FM93C46N capable of multiple read/write cycles? A: Yes, FM93C46N supports a minimum of 1 million erase/write cycles, ensuring durability and reliability in practical applications.

  7. Q: Can FM93C46N retain data during power loss or system shutdown? A: Yes, FM93C46N is non-volatile, meaning it can retain data even when power is disconnected or the system is turned off.

  8. Q: Does FM93C46N have any built-in security features? A: No, FM93C46N does not have built-in security features like write protection or password protection. Additional measures may be required for data security.

  9. Q: Can FM93C46N operate in extreme temperature conditions? A: Yes, FM93C46N has a wide operating temperature range of -40°C to +85°C, making it suitable for various industrial and automotive applications.

  10. Q: Are there any limitations to consider when using FM93C46N? A: One limitation is that FM93C46N does not support byte-level erase/write operations. It can only erase/write data at the word (16-bit) level. Additionally, care should be taken to ensure proper voltage levels and timing during communication.

Please note that these answers are general and may vary depending on the specific implementation and requirements of your technical solution.