ON Semiconductor
Bild kan vara representation.
Se specifikationer för produktinformation.
FM93C56N
Visa detalj Datablad

FM93C56N

Product Overview

  • Category: Integrated Circuit (IC)
  • Use: Non-volatile memory storage
  • Characteristics: Low power consumption, high reliability
  • Package: DIP-8 (Dual In-line Package with 8 pins)
  • Essence: Serial Electrically Erasable Programmable Read-Only Memory (EEPROM)
  • Packaging/Quantity: Tape and Reel, 2500 units per reel

Specifications

  • Memory Size: 2Kbits (256 x 8 bits)
  • Operating Voltage: 2.5V - 5.5V
  • Operating Temperature: -40°C to +85°C
  • Write Cycles: 1,000,000
  • Data Retention: 100 years

Detailed Pin Configuration

The FM93C56N IC has a total of 8 pins arranged as follows:

  1. Chip Select (/CS)
  2. Serial Clock (SCK)
  3. Serial Data Input (SI)
  4. Serial Data Output (SO)
  5. Write Enable (/WEN)
  6. VCC (Power Supply)
  7. Ground (GND)
  8. Not Connected (NC)

Functional Features

  • Byte-wise or page-wise write operations
  • Sequential read operation
  • Software and hardware write protection
  • Self-timed programming cycle
  • Power-saving standby mode
  • High-speed clock frequency support

Advantages and Disadvantages

Advantages

  • Low power consumption
  • High reliability and data retention
  • Compact package size
  • Easy integration into various electronic systems
  • Wide operating voltage range

Disadvantages

  • Limited memory capacity (2Kbits)
  • Relatively slower write cycles compared to some alternatives

Working Principles

The FM93C56N is based on EEPROM technology, which allows for non-volatile data storage. It utilizes a serial interface to communicate with the microcontroller or other devices. The IC can be programmed and erased electrically, without requiring additional external components.

Detailed Application Field Plans

The FM93C56N is commonly used in various electronic systems that require non-volatile memory storage. Some of its application fields include:

  1. Automotive electronics
  2. Industrial control systems
  3. Consumer electronics
  4. Medical devices
  5. Communication equipment

Detailed and Complete Alternative Models

  • AT24C02: 2Kbit EEPROM IC from Atmel
  • CAT24C02: 2Kbit EEPROM IC from ON Semiconductor
  • M93C56: 2Kbit EEPROM IC from STMicroelectronics
  • 24AA02: 2Kbit EEPROM IC from Microchip Technology

These alternative models offer similar functionality and can be used as replacements for the FM93C56N in various applications.

Word count: 305 words

Lista 10 Vanliga frågor och svar relaterade till tillämpningen av FM93C56N i tekniska lösningar

Sure! Here are 10 common questions and answers related to the application of FM93C56N in technical solutions:

  1. Q: What is FM93C56N? A: FM93C56N is a serial EEPROM (Electrically Erasable Programmable Read-Only Memory) chip that can store data electronically.

  2. Q: What is the storage capacity of FM93C56N? A: FM93C56N has a storage capacity of 2 kilobits, which is equivalent to 256 bytes.

  3. Q: How is FM93C56N connected to a microcontroller or other devices? A: FM93C56N is typically connected using a serial communication protocol such as I2C or SPI.

  4. Q: Can FM93C56N be used for non-volatile storage in embedded systems? A: Yes, FM93C56N is commonly used for non-volatile storage in embedded systems due to its small size and low power consumption.

  5. Q: Is FM93C56N suitable for storing configuration settings or calibration data? A: Absolutely, FM93C56N is often used to store configuration settings, calibration data, or other small amounts of persistent information.

  6. Q: Can FM93C56N be easily interfaced with Arduino or Raspberry Pi? A: Yes, FM93C56N can be easily interfaced with popular development boards like Arduino or Raspberry Pi using I2C or SPI interfaces.

  7. Q: Does FM93C56N support multiple read and write operations? A: Yes, FM93C56N supports multiple read and write operations, allowing for flexible data manipulation.

  8. Q: What is the typical operating voltage range for FM93C56N? A: FM93C56N typically operates within a voltage range of 2.5V to 5.5V.

  9. Q: Can FM93C56N withstand high temperatures in industrial applications? A: Yes, FM93C56N is designed to operate reliably in a wide temperature range, making it suitable for industrial applications.

  10. Q: Are there any limitations or precautions when using FM93C56N? A: Some precautions include ensuring proper power supply decoupling, avoiding excessive write cycles, and following the recommended operating conditions mentioned in the datasheet.

Please note that these answers are general and may vary depending on the specific implementation and requirements of your technical solution.