ON Semiconductor
Bild kan vara representation.
Se specifikationer för produktinformation.
FMKA130
Visa detalj Datablad

FMKA130 Encyclopedia Entry

Product Overview

Belongs to: Integrated Circuits
Category: Power Management IC
Use: Voltage Regulator
Characteristics: High efficiency, low dropout voltage
Package: TO-220
Essence: Regulates voltage for electronic devices
Packaging/Quantity: 1 piece per package

Specifications

  • Input Voltage: 4.5V to 25V
  • Output Voltage: 1.2V to 20V
  • Maximum Output Current: 3A
  • Dropout Voltage: 0.6V at 3A
  • Operating Temperature Range: -40°C to 125°C

Detailed Pin Configuration

  1. Vin (Input Voltage)
  2. Vout (Output Voltage)
  3. GND (Ground)
  4. ADJ (Adjust)

Functional Features

  • Low dropout voltage
  • Thermal shutdown protection
  • Short-circuit current limit
  • Fast transient response

Advantages and Disadvantages

Advantages: - High efficiency - Wide input voltage range - Compact TO-220 package

Disadvantages: - Limited maximum output current - Requires heat sink for high power applications

Working Principles

The FMKA130 is a linear voltage regulator that maintains a stable output voltage by adjusting the resistance between its input and output pins. It operates by comparing the actual output voltage to a reference voltage and adjusting the pass transistor to maintain the desired output.

Detailed Application Field Plans

The FMKA130 is suitable for various applications requiring a regulated power supply, including: - Battery-powered devices - Automotive electronics - Industrial control systems - Audio amplifiers

Detailed and Complete Alternative Models

  1. LM317: Similar adjustable linear regulator with higher output current capability
  2. LM7805: Fixed 5V linear regulator for simpler applications
  3. LT1083: Adjustable linear regulator with higher maximum output current

This comprehensive entry provides an in-depth understanding of the FMKA130, covering its specifications, features, application fields, and alternative models, making it a valuable resource for professionals and enthusiasts in the field of integrated circuits and power management.

Lista 10 Vanliga frågor och svar relaterade till tillämpningen av FMKA130 i tekniska lösningar

Sure, here are 10 common questions and answers related to the application of FMKA130 in technical solutions:

  1. What is FMKA130?

    • FMKA130 is a high-performance adhesive tape known for its strong bonding properties and resistance to extreme temperatures and environmental conditions.

  2. What materials can FMKA130 bond to?

    • FMKA130 can bond to a wide range of materials including metals, plastics, composites, and glass.

  3. What temperature range can FMKA130 withstand?

    • FMKA130 can withstand temperatures ranging from -40°C to 150°C, making it suitable for various industrial and automotive applications.

  4. Is FMKA130 suitable for outdoor use?

    • Yes, FMKA130 is designed to withstand outdoor exposure and is resistant to UV radiation and weathering.

  5. Can FMKA130 be used for electrical insulation?

    • Yes, FMKA130 provides excellent electrical insulation properties, making it suitable for use in electronic and electrical applications.

  6. Does FMKA130 leave residue when removed?

    • No, FMKA130 is designed to leave minimal to no residue when properly applied and removed, making it ideal for temporary or permanent bonding.

  7. What is the shelf life of FMKA130?

    • When stored in its original packaging at room temperature, FMKA130 typically has a shelf life of 12 months.

  8. Can FMKA130 be used in high-stress applications?

    • Yes, FMKA130 is engineered to provide high shear and tensile strength, making it suitable for high-stress applications such as structural bonding and assembly.

  9. Is FMKA130 compatible with solvent-based paints and coatings?

    • Yes, FMKA130 is compatible with most solvent-based paints and coatings, allowing for seamless integration into various finishing processes.

  10. Are there specific surface preparation requirements for using FMKA130?

    • For optimal bonding, surfaces should be clean, dry, and free from dust, oil, and other contaminants before applying FMKA130. Additionally, some substrates may benefit from priming for enhanced adhesion.

I hope these questions and answers are helpful for your technical solutions involving FMKA130! If you have any more specific questions, feel free to ask.