ON Semiconductor
Bild kan vara representation.
Se specifikationer för produktinformation.
NE5532ANG
Visa detalj Datablad

NE5532ANG

Product Overview

Category

NE5532ANG belongs to the category of integrated circuit (IC) amplifiers.

Use

It is primarily used as an audio operational amplifier in various electronic devices and audio systems.

Characteristics

  • High gain bandwidth product
  • Low noise
  • Low distortion
  • Wide supply voltage range
  • High output current capability

Package

NE5532ANG is available in a dual inline package (DIP) with 8 pins.

Essence

The essence of NE5532ANG lies in its ability to provide high-quality audio amplification with low noise and distortion.

Packaging/Quantity

NE5532ANG is typically packaged in reels or tubes, with quantities varying based on customer requirements.

Specifications

  • Supply Voltage: ±3V to ±22V
  • Input Offset Voltage: 0.6mV (maximum)
  • Input Bias Current: 200nA (maximum)
  • Input Voltage Noise: 5nV/√Hz (typical)
  • Gain Bandwidth Product: 10MHz (typical)
  • Slew Rate: 9V/µs (typical)
  • Output Current: 38mA (typical)

Detailed Pin Configuration

  1. Non-Inverting Input (+)
  2. Inverting Input (-)
  3. Negative Power Supply (-Vcc)
  4. Positive Power Supply (+Vcc)
  5. Offset Null
  6. Output
  7. Compensation
  8. Ground (GND)

Functional Features

  • High voltage gain
  • Low input offset voltage
  • Low input bias current
  • High common-mode rejection ratio
  • Internal frequency compensation
  • Short-circuit protection

Advantages

  • Excellent audio performance
  • Versatile and widely used in audio applications
  • Stable and reliable operation
  • Low power consumption
  • Easy to integrate into circuit designs

Disadvantages

  • Relatively higher cost compared to some other audio amplifiers
  • Limited output current capability

Working Principles

NE5532ANG operates as a voltage amplifier, where the input signal is amplified and reproduced at the output with minimal distortion and noise. It utilizes internal frequency compensation to ensure stability and high gain bandwidth product.

Detailed Application Field Plans

NE5532ANG finds extensive application in various audio systems, including:

  1. Hi-Fi audio amplifiers
  2. Audio mixers
  3. Guitar amplifiers
  4. Headphone amplifiers
  5. Active filters
  6. Equalizers
  7. Audio preamplifiers

Detailed and Complete Alternative Models

Some alternative models that can be considered as replacements for NE5532ANG include:

  1. LM833
  2. TL072
  3. OPA2134
  4. NJM4580
  5. AD827

These alternatives offer similar characteristics and performance, providing flexibility in choosing the most suitable option for specific applications.

Word count: 408 words

Lista 10 Vanliga frågor och svar relaterade till tillämpningen av NE5532ANG i tekniska lösningar

Sure! Here are 10 common questions and answers related to the application of NE5532ANG in technical solutions:

  1. Q: What is NE5532ANG? A: NE5532ANG is a dual operational amplifier (op-amp) that is commonly used in audio applications due to its low noise and high-performance characteristics.

  2. Q: What is the voltage supply range for NE5532ANG? A: The voltage supply range for NE5532ANG is typically between ±5V and ±18V.

  3. Q: Can NE5532ANG be used as a voltage follower? A: Yes, NE5532ANG can be used as a voltage follower by connecting the output directly to the inverting input.

  4. Q: Is NE5532ANG suitable for audio signal amplification? A: Yes, NE5532ANG is widely used for audio signal amplification due to its low distortion and high gain bandwidth.

  5. Q: Can NE5532ANG be used in active filters? A: Yes, NE5532ANG can be used in active filter circuits such as low-pass, high-pass, and bandpass filters.

  6. Q: What is the maximum output current of NE5532ANG? A: The maximum output current of NE5532ANG is typically around 20mA.

  7. Q: Does NE5532ANG require external compensation? A: No, NE5532ANG has internal compensation, so it does not require any external components for stability.

  8. Q: Can NE5532ANG operate at high temperatures? A: Yes, NE5532ANG is designed to operate over a wide temperature range, typically from -40°C to +85°C.

  9. Q: Can NE5532ANG be used in single-supply applications? A: Yes, NE5532ANG can be used in single-supply applications by biasing the inputs at half the supply voltage.

  10. Q: Is NE5532ANG suitable for precision applications? A: Yes, NE5532ANG is known for its low offset voltage and low input bias current, making it suitable for precision applications.

Please note that these answers are general and may vary depending on specific circuit requirements and application scenarios.