STMicroelectronics
Bild kan vara representation.
Se specifikationer för produktinformation.
TS272IDT
Visa detalj Datablad

TS272IDT

Product Overview

  • Category: Integrated Circuit (IC)
  • Use: Operational Amplifier
  • Characteristics: Dual Rail-to-Rail Input/Output, Low Power Consumption
  • Package: SOIC-8
  • Essence: High-performance operational amplifier for various applications
  • Packaging/Quantity: Tape and Reel, 2500 units per reel

Specifications

  • Supply Voltage: ±2.5V to ±16V
  • Input Offset Voltage: 1mV (maximum)
  • Input Bias Current: 1pA (typical)
  • Gain Bandwidth Product: 3MHz (typical)
  • Slew Rate: 1.6V/µs (typical)
  • Quiescent Current: 500µA (typical)
  • Operating Temperature Range: -40°C to +125°C

Detailed Pin Configuration

The TS272IDT is an 8-pin IC with the following pin configuration:

  1. Non-Inverting Input A
  2. Inverting Input A
  3. V-
  4. Output A
  5. V+
  6. Output B
  7. VCC+
  8. Non-Inverting Input B

Functional Features

  • Rail-to-rail input and output capability allows for maximum dynamic range.
  • Low power consumption makes it suitable for battery-powered applications.
  • Wide supply voltage range enables flexibility in various circuit designs.
  • High gain bandwidth product ensures accurate signal amplification.
  • Low input bias current minimizes loading effects on signal sources.

Advantages

  • Dual operational amplifier in a single package saves board space and reduces component count.
  • Excellent performance characteristics make it suitable for precision applications.
  • Robust design ensures reliable operation in harsh environments.
  • Cost-effective solution for a wide range of applications.

Disadvantages

  • Limited output current capability may not be suitable for driving heavy loads.
  • Slightly higher input offset voltage compared to some alternative models.

Working Principles

The TS272IDT is a high-performance operational amplifier that amplifies the difference between its two input voltages. It operates on a dual power supply and provides rail-to-rail input and output swing. The internal circuitry ensures low power consumption while maintaining excellent performance characteristics.

Detailed Application Field Plans

The TS272IDT is widely used in various applications, including:

  1. Signal conditioning and amplification in industrial control systems.
  2. Audio signal processing in consumer electronics.
  3. Sensor interface circuits in automotive electronics.
  4. Active filters and instrumentation amplifiers in test and measurement equipment.
  5. Voltage and current sensing in power management systems.

Detailed and Complete Alternative Models

  1. LM358: Dual Operational Amplifier, Low Power Consumption
  2. MCP6002: Dual Rail-to-Rail Input/Output Op-Amp, Low Quiescent Current
  3. TL072: Dual JFET Input Operational Amplifier, High Slew Rate

These alternative models offer similar functionality and can be considered based on specific application requirements.

Word count: 305 words

Lista 10 Vanliga frågor och svar relaterade till tillämpningen av TS272IDT i tekniska lösningar

Sure! Here are 10 common questions and answers related to the application of TS272IDT in technical solutions:

  1. Q: What is TS272IDT? A: TS272IDT is a dual operational amplifier (op-amp) integrated circuit commonly used in various electronic applications.

  2. Q: What is the voltage supply range for TS272IDT? A: The voltage supply range for TS272IDT is typically between 3V and 16V.

  3. Q: What is the maximum output current of TS272IDT? A: The maximum output current of TS272IDT is typically around 40mA.

  4. Q: Can TS272IDT be used in low-power applications? A: Yes, TS272IDT is suitable for low-power applications as it has a low quiescent current consumption.

  5. Q: What is the input offset voltage of TS272IDT? A: The input offset voltage of TS272IDT is typically very low, around a few millivolts.

  6. Q: Is TS272IDT suitable for audio applications? A: Yes, TS272IDT can be used in audio applications such as audio amplifiers or headphone amplifiers.

  7. Q: Does TS272IDT have built-in protection features? A: Yes, TS272IDT includes built-in protection features like short-circuit protection and thermal shutdown.

  8. Q: Can TS272IDT operate in a wide temperature range? A: Yes, TS272IDT is designed to operate reliably in a wide temperature range, typically from -40°C to +125°C.

  9. Q: What is the typical gain bandwidth product of TS272IDT? A: The typical gain bandwidth product of TS272IDT is around 1 MHz.

  10. Q: Is TS272IDT available in different package options? A: Yes, TS272IDT is available in various package options, including SO-8 and TSSOP-8.

Please note that the answers provided here are general and may vary depending on the specific datasheet and manufacturer's specifications for TS272IDT.