Texas Instruments
Bild kan vara representation.
Se specifikationer för produktinformation.
74FCT162245ATPVCT
Visa detalj Datablad

Encyclopedia Entry: 74FCT162245ATPVCT

Product Overview

Category

The 74FCT162245ATPVCT belongs to the category of integrated circuits (ICs) and specifically falls under the group of bus transceivers.

Use

This IC is primarily used for bidirectional data communication between two buses with different voltage levels. It enables the transfer of digital signals between these buses, ensuring efficient and reliable data transmission.

Characteristics

  • Bidirectional bus transceiver
  • Supports voltage level translation
  • High-speed operation
  • Low power consumption
  • Robust design for noise immunity

Package

The 74FCT162245ATPVCT is available in a surface mount package, which ensures easy integration onto printed circuit boards (PCBs). The package type is TSSOP (Thin Shrink Small Outline Package).

Essence

The essence of this product lies in its ability to facilitate seamless data transfer between buses operating at different voltage levels, while maintaining signal integrity and minimizing power consumption.

Packaging/Quantity

The 74FCT162245ATPVCT is typically packaged in reels or tubes, containing a specific quantity of ICs per package. The exact packaging and quantity may vary depending on the supplier or manufacturer.

Specifications

  • Number of Channels: 16
  • Input Voltage Levels: 2.5V / 3.3V
  • Output Voltage Levels: 3.3V / 5V
  • Maximum Data Rate: 200 Mbps
  • Operating Temperature Range: -40°C to +85°C
  • Supply Voltage Range: 4.5V to 5.5V
  • Package Type: TSSOP

Detailed Pin Configuration

The 74FCT162245ATPVCT has a total of 48 pins, distributed as follows:

  • Pins 1-8: Channel A Data Inputs/Outputs (A1-A8)
  • Pins 9-16: Channel B Data Inputs/Outputs (B1-B8)
  • Pins 17-24: Channel A Output Enable (OE) Inputs (OEA1-OEA8)
  • Pins 25-32: Channel B Output Enable (OE) Inputs (OEB1-OEB8)
  • Pins 33-40: Channel Select Inputs (S1-S8)
  • Pins 41-48: Ground (GND) and Supply Voltage (VCC) Pins

Functional Features

  • Bidirectional data transfer between two buses with different voltage levels
  • Automatic voltage level translation for seamless communication
  • Individual channel control through output enable (OE) inputs
  • High-speed operation for efficient data transmission
  • Robust design to minimize noise interference

Advantages and Disadvantages

Advantages

  • Enables communication between buses operating at different voltage levels
  • Supports high-speed data transfer
  • Low power consumption
  • Robust design ensures reliable operation
  • Easy integration onto PCBs due to surface mount package

Disadvantages

  • Limited to a specific number of channels (16 in this case)
  • Requires careful consideration of voltage compatibility between buses

Working Principles

The 74FCT162245ATPVCT utilizes voltage level translators to facilitate bidirectional data transfer between two buses. It automatically detects the voltage levels of the input signals and translates them to the appropriate levels for the output signals. This ensures compatibility and reliable communication between the buses.

Detailed Application Field Plans

The 74FCT162245ATPVCT finds applications in various fields where bidirectional data transfer between buses with different voltage levels is required. Some common application areas include:

  1. Industrial Automation: Facilitating communication between control systems operating at different voltage levels.
  2. Telecommunications: Enabling data exchange between telecom equipment with varying voltage requirements.
  3. Automotive Electronics: Supporting communication between different subsystems within a vehicle.
  4. Consumer Electronics: Facilitating data transfer between devices operating at different voltage levels, such as smartphones and peripherals.

Detailed and Complete Alternative Models

  1. SN74LV245A: Bidirectional octal bus transceiver with voltage level translation capability.
  2. MC74VHC245: Octal bus transceiver with 5V to 3.3V voltage level translation.
  3. CD74HCT245: High-speed octal bus transceiver with voltage level shifting capabilities.

These alternative models offer similar functionality to the 74FCT162245ATPVCT and can be considered based on specific application requirements.

Word count: 610 words

Lista 10 Vanliga frågor och svar relaterade till tillämpningen av 74FCT162245ATPVCT i tekniska lösningar

Sure! Here are 10 common questions and answers related to the application of 74FCT162245ATPVCT in technical solutions:

  1. Q: What is the 74FCT162245ATPVCT? A: The 74FCT162245ATPVCT is a 16-bit bus transceiver with 3-state outputs, designed for bidirectional data communication between different voltage systems.

  2. Q: What voltage levels does the 74FCT162245ATPVCT support? A: The 74FCT162245ATPVCT supports voltage levels ranging from 1.2V to 5.5V.

  3. Q: How many channels does the 74FCT162245ATPVCT have? A: The 74FCT162245ATPVCT has 16 bidirectional channels.

  4. Q: Can the 74FCT162245ATPVCT be used for level shifting? A: Yes, the 74FCT162245ATPVCT can be used for level shifting as it supports bidirectional voltage translation.

  5. Q: What is the maximum data transfer rate supported by the 74FCT162245ATPVCT? A: The 74FCT162245ATPVCT can support data transfer rates up to 200 MHz.

  6. Q: Is the 74FCT162245ATPVCT compatible with other logic families? A: Yes, the 74FCT162245ATPVCT is compatible with various logic families such as TTL, CMOS, and LVCMOS.

  7. Q: Does the 74FCT162245ATPVCT have built-in ESD protection? A: Yes, the 74FCT162245ATPVCT has built-in ESD protection to safeguard against electrostatic discharge.

  8. Q: Can the 74FCT162245ATPVCT be used in hot-swapping applications? A: Yes, the 74FCT162245ATPVCT is designed to support hot-swapping, allowing for easy insertion and removal of devices without disrupting the system.

  9. Q: What is the power supply voltage range for the 74FCT162245ATPVCT? A: The 74FCT162245ATPVCT operates with a power supply voltage range of 2.3V to 5.5V.

  10. Q: Are there any specific layout considerations for using the 74FCT162245ATPVCT? A: Yes, it is recommended to follow the manufacturer's guidelines for proper PCB layout, including minimizing trace lengths and providing adequate decoupling capacitors near the device.

Please note that these answers are general and may vary depending on the specific application and requirements.