CD4059AM96G4

Product Overview

• Category: Integrated Circuit (IC)
• Use: Digital Counter
• Characteristics: High-speed operation, low power consumption
• Package: 16-pin SOIC (Small Outline Integrated Circuit)
• Essence: Counting and controlling digital signals
• Packaging/Quantity: Tape and reel, 2500 units per reel

Specifications

• Supply Voltage: 3V to 18V
• Maximum Clock Frequency: 8 MHz
• Number of Counters: 2
• Maximum Count Value: 256
• Operating Temperature Range: -40°C to +85°C

Detailed Pin Configuration

The CD4059AM96G4 has a total of 16 pins. The pin configuration is as follows:

1. CLK1: Clock input for Counter 1
2. RST1: Reset input for Counter 1
3. EN1: Enable input for Counter 1
4. QH1: Output of the most significant bit (MSB) of Counter 1
5. QL1: Output of the least significant bit (LSB) of Counter 1
6. GND: Ground reference
7. QL2: Output of the least significant bit (LSB) of Counter 2
8. QH2: Output of the most significant bit (MSB) of Counter 2
9. EN2: Enable input for Counter 2
10. RST2: Reset input for Counter 2
11. CLK2: Clock input for Counter 2 12-16: NC (No Connection)

Functional Features

• Dual Counter: The CD4059AM96G4 consists of two independent counters that can operate simultaneously.
• Cascadable: Multiple CD4059AM96G4 ICs can be cascaded to increase the counting range.
• Low Power Consumption: The IC is designed to consume minimal power, making it suitable for battery-powered applications.
• High-Speed Operation: The CD4059AM96G4 can operate at clock frequencies up to 8 MHz, allowing for fast counting operations.

Advantages and Disadvantages

Advantages: - Dual counter functionality provides flexibility in various applications. - Low power consumption extends battery life in portable devices. - High-speed operation enables quick counting operations.

Disadvantages: - Limited maximum count value of 256 may not be sufficient for certain applications requiring larger counts. - Lack of built-in debounce circuitry may require additional external components for reliable input signal processing.

Working Principles

The CD4059AM96G4 is a synchronous binary counter that operates based on the clock input signals. Each counter within the IC increments its count value by one on each rising edge of the clock signal. The counters can be reset to zero using the reset inputs or disabled using the enable inputs. The outputs represent the binary count values in both the most significant bit (MSB) and least significant bit (LSB) formats.

Detailed Application Field Plans

The CD4059AM96G4 finds applications in various fields, including:

1. Digital Electronics: Used in digital systems for counting and controlling signals.
2. Industrial Automation: Counting and monitoring processes in industrial automation systems.
3. Communication Systems: Used for frequency division and synchronization purposes.
4. Test and Measurement Equipment: Incorporation into test and measurement instruments for accurate counting operations.
5. Consumer Electronics: Used in electronic gadgets such as calculators, timers, and clocks.

Detailed and Complete Alternative Models

1. CD4029BM96G4: Similar dual counter IC with a maximum count value of 512.
2. CD4516BM96G4: Binary up/down counter IC with additional control features.
3. CD4020BM96G4: 14-stage binary counter IC with a higher maximum count value of 16384.

(Note: The above alternative models are just a few examples and not an exhaustive list.)

This entry provides an overview of the CD4059AM96G4, including its product information, specifications, pin configuration, functional features, advantages, disadvantages, working principles, application field plans, and alternative models.