Texas Instruments
Bild kan vara representation.
Se specifikationer för produktinformation.
INA121PA
Visa detalj Datablad

INA121PA

Basic Information Overview

  • Category: Integrated Circuit (IC)
  • Use: Instrumentation Amplifier
  • Characteristics: High precision, low noise, high common-mode rejection ratio (CMRR)
  • Package: PDIP (Plastic Dual In-Line Package)
  • Essence: Precision signal amplification and filtering
  • Packaging/Quantity: Tube packaging, 25 pieces per tube

Specifications

  • Supply Voltage Range: ±2.25V to ±18V
  • Input Offset Voltage: 50µV (maximum)
  • Input Bias Current: 500nA (maximum)
  • Gain Bandwidth Product: 1MHz (typical)
  • Input Common-Mode Voltage Range: -Vs + 1.5V to +Vs - 1.5V
  • Operating Temperature Range: -40°C to +85°C

Detailed Pin Configuration

The INA121PA has a total of 8 pins: 1. Pin 1: Non-Inverting Input (+IN) 2. Pin 2: Inverting Input (-IN) 3. Pin 3: Output (OUT) 4. Pin 4: Negative Power Supply (-Vs) 5. Pin 5: Null (N.C.) 6. Pin 6: Positive Power Supply (+Vs) 7. Pin 7: Reference Voltage (REF) 8. Pin 8: Null (N.C.)

Functional Features

  • High input impedance
  • Low output impedance
  • Adjustable gain
  • Excellent linearity
  • Wide bandwidth
  • Low power consumption

Advantages and Disadvantages

Advantages: - High precision amplification - Low noise performance - Good rejection of common-mode signals - Versatile and adjustable gain settings

Disadvantages: - Limited supply voltage range - Relatively high cost compared to basic operational amplifiers

Working Principles

The INA121PA is an instrumentation amplifier that amplifies small differential signals while rejecting common-mode noise. It consists of three operational amplifiers and precision resistors. The input signal is amplified by the difference between the non-inverting and inverting inputs, resulting in a high gain output.

Detailed Application Field Plans

  • Medical equipment: ECG (Electrocardiogram) amplification
  • Industrial control systems: Sensor signal conditioning
  • Strain gauge measurements: Bridge amplification
  • Audio equipment: High-fidelity audio amplification

Detailed and Complete Alternative Models

  1. INA128P: Similar specifications, DIP package
  2. AD620: Lower power consumption, SOIC package
  3. AD8221: Higher gain bandwidth product, MSOP package
  4. MCP6N11: Lower cost, DFN package
  5. LT1167: Higher input voltage range, SOT-23 package

Note: This is not an exhaustive list, and there are several other alternative models available in the market.

This entry provides a comprehensive overview of the INA121PA, including its basic information, specifications, pin configuration, functional features, advantages and disadvantages, working principles, application field plans, and alternative models.

Lista 10 Vanliga frågor och svar relaterade till tillämpningen av INA121PA i tekniska lösningar

Sure! Here are 10 common questions and answers related to the application of INA121PA in technical solutions:

  1. Q: What is INA121PA?
    A: INA121PA is a precision instrumentation amplifier that can amplify small differential signals with high accuracy.

  2. Q: What is the typical supply voltage range for INA121PA?
    A: The typical supply voltage range for INA121PA is ±2.25V to ±18V.

  3. Q: What is the input voltage range of INA121PA?
    A: The input voltage range of INA121PA is typically ±200mV, but it can be extended by using external resistors.

  4. Q: Can INA121PA handle high common-mode voltages?
    A: Yes, INA121PA has a high common-mode rejection ratio (CMRR) of typically 100dB, allowing it to reject common-mode voltages effectively.

  5. Q: What is the gain range of INA121PA?
    A: The gain range of INA121PA is adjustable from 1 to 1000 by using external resistors.

  6. Q: Is INA121PA suitable for low-power applications?
    A: Yes, INA121PA has a low quiescent current of typically 500µA, making it suitable for low-power applications.

  7. Q: Can INA121PA operate in harsh environments?
    A: Yes, INA121PA has a wide operating temperature range of -40°C to +85°C, making it suitable for various environments.

  8. Q: Does INA121PA have built-in protection features?
    A: Yes, INA121PA has built-in protection against overvoltage and reverse polarity, ensuring the safety of the circuit.

  9. Q: Can INA121PA be used in single-supply applications?
    A: Yes, INA121PA can be used in single-supply applications by connecting the reference pin to a voltage within the supply range.

  10. Q: What are some common applications of INA121PA?
    A: Some common applications of INA121PA include medical instrumentation, strain gauge amplification, pressure and temperature sensing, and data acquisition systems.

Please note that these answers are general and may vary depending on specific datasheet specifications and application requirements.