Texas Instruments
Bild kan vara representation.
Se specifikationer för produktinformation.
OPA227U
Visa detalj Datablad

OPA227U

Basic Information Overview

  • Category: Operational Amplifier
  • Use: Signal amplification and conditioning in electronic circuits
  • Characteristics:
    • High gain and bandwidth
    • Low input offset voltage and bias current
    • Wide supply voltage range
    • Rail-to-rail input and output capability
  • Package: SOIC (Small Outline Integrated Circuit)
  • Essence: Precision operational amplifier
  • Packaging/Quantity: Available in reels of 2500 units

Specifications

  • Supply Voltage Range: ±2.25V to ±18V
  • Input Offset Voltage: 150µV (maximum)
  • Input Bias Current: 1nA (maximum)
  • Gain Bandwidth Product: 8MHz
  • Slew Rate: 4V/µs
  • Input Common Mode Voltage Range: -Vs + 1.5V to +Vs - 1.5V
  • Output Voltage Swing: -Vs + 50mV to +Vs - 50mV
  • Operating Temperature Range: -40°C to +125°C

Detailed Pin Configuration

The OPA227U has a standard pin configuration for a SOIC package:

  1. Non-Inverting Input (+)
  2. Inverting Input (-)
  3. V-
  4. V+
  5. Offset Null
  6. Output
  7. NC (No Connection)
  8. Ground

Functional Features

  • High precision and accuracy
  • Low noise and distortion
  • Stable and reliable performance
  • Wide operating temperature range
  • Protection against overvoltage and short-circuits

Advantages and Disadvantages

Advantages: - High gain and bandwidth allow for accurate signal amplification - Low input offset voltage and bias current minimize errors in signal processing - Wide supply voltage range enables flexibility in circuit design - Rail-to-rail input and output capability ensures maximum signal swing

Disadvantages: - Relatively high power consumption compared to low-power operational amplifiers - Higher cost compared to basic operational amplifiers with fewer features

Working Principles

The OPA227U is a precision operational amplifier that utilizes a differential input stage, followed by gain stages and an output buffer. It operates based on the principles of negative feedback, where the difference between the input voltages is amplified and fed back to minimize the error between the input and output.

Detailed Application Field Plans

The OPA227U is commonly used in various applications, including: 1. Audio amplification and processing 2. Instrumentation and measurement systems 3. Active filters and equalizers 4. Data acquisition systems 5. Industrial control systems 6. Medical equipment 7. Communication systems

Detailed and Complete Alternative Models

  1. OPA227UA: Single version of OPA227U
  2. OPA2227U: Dual version of OPA227U
  3. OPA4227U: Quad version of OPA227U
  4. LT1677: Precision operational amplifier from Linear Technology
  5. AD8628: Precision operational amplifier from Analog Devices
  6. MCP6002: Low-power operational amplifier from Microchip

These alternative models offer similar functionality and performance characteristics to the OPA227U, providing options for different design requirements.

Word count: 420 words

Lista 10 Vanliga frågor och svar relaterade till tillämpningen av OPA227U i tekniska lösningar

  1. Question: What is the typical supply voltage range for OPA227U?
    Answer: The typical supply voltage range for OPA227U is ±2.25V to ±18V.

  2. Question: What is the input offset voltage of OPA227U?
    Answer: The input offset voltage of OPA227U is typically 25μV.

  3. Question: Can OPA227U be used in low-power applications?
    Answer: Yes, OPA227U is suitable for low-power applications with a typical quiescent current of 725μA.

  4. Question: What is the bandwidth of OPA227U?
    Answer: The bandwidth of OPA227U is typically 8MHz.

  5. Question: Is OPA227U suitable for precision amplification?
    Answer: Yes, OPA227U is designed for precision amplification with low offset voltage and drift.

  6. Question: Does OPA227U have built-in protection features?
    Answer: OPA227U includes built-in electrostatic discharge (ESD) protection.

  7. Question: Can OPA227U operate in harsh environments?
    Answer: OPA227U is designed to operate in harsh environments with a wide temperature range and high reliability.

  8. Question: What is the package type of OPA227U?
    Answer: OPA227U is available in a small outline package (SOIC) and micro-size package (MSOP).

  9. Question: Is OPA227U RoHS compliant?
    Answer: Yes, OPA227U is RoHS compliant, meeting environmental standards.

  10. Question: Can OPA227U be used in audio applications?
    Answer: Yes, OPA227U can be used in audio applications due to its low noise and high fidelity performance.