Texas Instruments
Bild kan vara representation.
Se specifikationer för produktinformation.
SN65MLVD200AD
Visa detalj Datablad

SN65MLVD200AD

Product Overview

  • Category: Integrated Circuit
  • Use: LVDS Driver/Receiver
  • Characteristics: High-speed, low-voltage differential signaling
  • Package: 8-pin SOIC (Small Outline Integrated Circuit)
  • Essence: Transmits and receives high-speed digital signals over twisted-pair copper cables
  • Packaging/Quantity: Tape and Reel, 2500 units per reel

Specifications

  • Supply Voltage Range: 3V to 3.6V
  • Operating Temperature Range: -40°C to +85°C
  • Data Rate: Up to 400 Mbps
  • Number of Channels: 1
  • Input Common Mode Voltage Range: ±100 mV
  • Output Voltage Swing: 350 mV (minimum)
  • Propagation Delay: 2 ns (maximum)

Pin Configuration

The SN65MLVD200AD has the following pin configuration:

  1. VCC: Power supply voltage input
  2. GND: Ground reference
  3. IN: Differential input signal
  4. OUT: Differential output signal
  5. NC: No connection
  6. EN: Enable control input
  7. GND: Ground reference
  8. VCC: Power supply voltage input

Functional Features

  • High-speed data transmission using LVDS technology
  • Low power consumption
  • Wide common mode voltage range for improved noise immunity
  • Built-in enable control for power management
  • ESD protection on all pins for enhanced reliability

Advantages and Disadvantages

Advantages: - High-speed data transfer capability - Low power consumption - Excellent noise immunity - Compact package size

Disadvantages: - Limited number of channels (only 1) - Requires external components for complete functionality

Working Principles

The SN65MLVD200AD is designed to transmit and receive high-speed digital signals using Low-Voltage Differential Signaling (LVDS) technology. It operates by converting parallel data into a differential signal, which is then transmitted over twisted-pair copper cables. The receiver section of the IC converts the received differential signal back into parallel data.

Detailed Application Field Plans

The SN65MLVD200AD is commonly used in various applications, including:

  1. High-speed data communication systems
  2. Industrial automation and control systems
  3. Automotive electronics
  4. Medical equipment
  5. Test and measurement instruments

Detailed and Complete Alternative Models

  • SN65MLVD200A: Similar to SN65MLVD200AD, but with different package options (e.g., TSSOP)
  • SN65MLVD201: Dual-channel LVDS driver/receiver
  • SN65MLVD202: Quad-channel LVDS driver/receiver
  • SN65MLVD203: Octal-channel LVDS driver/receiver

These alternative models offer similar functionality but with varying channel counts and package options.

(Note: This entry has reached 330 words. Please add additional content to meet the required 1100 words.)

Lista 10 Vanliga frågor och svar relaterade till tillämpningen av SN65MLVD200AD i tekniska lösningar

Sure! Here are 10 common questions and answers related to the application of SN65MLVD200AD:

  1. Q: What is SN65MLVD200AD? A: SN65MLVD200AD is a low-voltage differential signaling (LVDS) driver and receiver designed for high-speed data transmission in various technical solutions.

  2. Q: What is the maximum data rate supported by SN65MLVD200AD? A: SN65MLVD200AD supports a maximum data rate of 400 Mbps, making it suitable for high-speed applications.

  3. Q: Can SN65MLVD200AD be used for point-to-point communication? A: Yes, SN65MLVD200AD can be used for point-to-point communication between two devices or components.

  4. Q: What is the operating voltage range of SN65MLVD200AD? A: SN65MLVD200AD operates within a voltage range of 3.0V to 3.6V.

  5. Q: Is SN65MLVD200AD compatible with other LVDS devices? A: Yes, SN65MLVD200AD is compatible with other LVDS devices that adhere to the same LVDS standard.

  6. Q: Can SN65MLVD200AD be used in automotive applications? A: Yes, SN65MLVD200AD is suitable for automotive applications due to its robustness and ability to withstand harsh environments.

  7. Q: Does SN65MLVD200AD support hot-plugging? A: No, SN65MLVD200AD does not support hot-plugging. It is recommended to power off the device before connecting or disconnecting it.

  8. Q: What is the typical power consumption of SN65MLVD200AD? A: The typical power consumption of SN65MLVD200AD is around 100mW, making it energy-efficient.

  9. Q: Can SN65MLVD200AD be used in long-distance data transmission? A: Yes, SN65MLVD200AD can be used for long-distance data transmission up to several meters, depending on the cable quality and signal integrity requirements.

  10. Q: Are evaluation boards or reference designs available for SN65MLVD200AD? A: Yes, Texas Instruments provides evaluation boards and reference designs for SN65MLVD200AD, which can help in the development and testing of technical solutions.

Please note that these answers are general and may vary based on specific application requirements. It is always recommended to refer to the datasheet and consult with the manufacturer for detailed information.