Texas Instruments
Bild kan vara representation.
Se specifikationer för produktinformation.
SN74ABT244ADWRG4
Visa detalj Datablad

SN74ABT244ADWRG4

Product Overview

  • Category: Integrated Circuit (IC)
  • Use: Buffer/Line Driver
  • Characteristics: High-speed, low-power, non-inverting
  • Package: SOIC (Small Outline Integrated Circuit)
  • Essence: Logic level translation and signal buffering
  • Packaging/Quantity: Tape and Reel, 2500 units per reel

Specifications

  • Supply Voltage Range: 4.5V to 5.5V
  • Input Voltage Range: 0V to VCC
  • Output Voltage Range: 0V to VCC
  • Operating Temperature Range: -40°C to +85°C
  • Propagation Delay Time: 3.8ns (typical)
  • Output Drive Capability: ±24mA

Detailed Pin Configuration

The SN74ABT244ADWRG4 has a total of 20 pins, which are arranged as follows:

  1. Pin 1: Output 1 (Y1)
  2. Pin 2: Output 2 (Y2)
  3. Pin 3: Output 3 (Y3)
  4. Pin 4: Output 4 (Y4)
  5. Pin 5: GND (Ground)
  6. Pin 6: Input 4 (A4)
  7. Pin 7: Input 3 (A3)
  8. Pin 8: Input 2 (A2)
  9. Pin 9: Input 1 (A1)
  10. Pin 10: Enable (EN)
  11. Pin 11: GND (Ground)
  12. Pin 12: Input 1 (B1)
  13. Pin 13: Input 2 (B2)
  14. Pin 14: Input 3 (B3)
  15. Pin 15: Input 4 (B4)
  16. Pin 16: Output 4 (Z4)
  17. Pin 17: Output 3 (Z3)
  18. Pin 18: Output 2 (Z2)
  19. Pin 19: Output 1 (Z1)
  20. Pin 20: VCC (Supply Voltage)

Functional Features

  • Non-inverting buffer/line driver
  • High-speed operation
  • Low power consumption
  • Logic level translation between different voltage domains
  • Wide operating temperature range

Advantages and Disadvantages

Advantages: - High-speed performance allows for efficient signal transmission - Low power consumption helps in reducing overall system energy requirements - Non-inverting nature simplifies signal processing - Wide operating temperature range enables usage in various environments

Disadvantages: - Limited output drive capability may restrict use in certain applications requiring higher current levels - Only supports logic level translation, not voltage level shifting

Working Principles

The SN74ABT244ADWRG4 is a non-inverting buffer/line driver that operates by amplifying and buffering input signals to provide high-speed, low-power outputs. It utilizes CMOS technology to achieve fast switching times and low static power dissipation. The device can be enabled or disabled using the EN pin, allowing for control over the output state.

Detailed Application Field Plans

The SN74ABT244ADWRG4 is commonly used in various applications, including:

  1. Microprocessor interfacing
  2. Data communication systems
  3. Memory address decoding
  4. Clock distribution networks
  5. Level shifting between different logic families

Detailed and Complete Alternative Models

  1. SN74ABT244A: Similar functionality with minor variations in specifications
  2. SN74LVC244A: Low-voltage version with compatible pin configuration
  3. SN74HC244: Higher drive capability but operates at a higher voltage level

These alternative models offer similar functionality and can be considered as substitutes based on specific application requirements.

Word count: 346 words

Lista 10 Vanliga frågor och svar relaterade till tillämpningen av SN74ABT244ADWRG4 i tekniska lösningar

Sure! Here are 10 common questions and answers related to the application of SN74ABT244ADWRG4:

  1. Q: What is SN74ABT244ADWRG4? A: SN74ABT244ADWRG4 is a type of octal buffer/line driver integrated circuit (IC) that can be used in various technical solutions.

  2. Q: What is the purpose of SN74ABT244ADWRG4? A: SN74ABT244ADWRG4 is designed to provide buffering and line driving capabilities, allowing it to interface between different logic families or drive signals over longer distances.

  3. Q: What voltage levels does SN74ABT244ADWRG4 support? A: SN74ABT244ADWRG4 supports a wide range of voltage levels, typically from 2V to 5.5V, making it compatible with many common logic families.

  4. Q: How many channels does SN74ABT244ADWRG4 have? A: SN74ABT244ADWRG4 has 8 channels, which means it can handle up to 8 input/output signals simultaneously.

  5. Q: Can SN74ABT244ADWRG4 be used for bidirectional communication? A: Yes, SN74ABT244ADWRG4 supports bidirectional communication, allowing data to be transmitted in both directions.

  6. Q: What is the maximum output current of SN74ABT244ADWRG4? A: The maximum output current of SN74ABT244ADWRG4 is typically around 32mA, which makes it suitable for driving standard logic inputs.

  7. Q: Does SN74ABT244ADWRG4 have any built-in protection features? A: Yes, SN74ABT244ADWRG4 has built-in protection against electrostatic discharge (ESD) and overvoltage conditions, ensuring its reliability in various environments.

  8. Q: Can SN74ABT244ADWRG4 be used in high-speed applications? A: Yes, SN74ABT244ADWRG4 is designed to operate at high speeds, with typical propagation delays in the range of a few nanoseconds.

  9. Q: What package options are available for SN74ABT244ADWRG4? A: SN74ABT244ADWRG4 is available in different package options, such as SOIC (Small Outline Integrated Circuit) and TSSOP (Thin Shrink Small Outline Package).

  10. Q: Where can I find more information about using SN74ABT244ADWRG4 in my specific application? A: You can refer to the datasheet provided by the manufacturer, which contains detailed information about the electrical characteristics, recommended operating conditions, and application examples for SN74ABT244ADWRG4.

Please note that the answers provided here are general and may vary depending on the specific requirements and use cases. It's always recommended to consult the datasheet and relevant technical documentation for accurate information.