SN74AUP1G79DCKTG4

Product Overview

• Category: Integrated Circuit
• Use: Logic Gate
• Characteristics: Single Positive-Edge-Triggered D-Type Flip-Flop
• Package: SC70 (SOT-323)
• Essence: High-Speed CMOS Technology
• Packaging/Quantity: Tape and Reel, 3000 pieces per reel

Specifications

• Supply Voltage Range: 0.8V to 3.6V
• Input Voltage Range: -0.5V to VCC + 0.5V
• Output Voltage Range: 0V to VCC
• Operating Temperature Range: -40°C to 85°C
• Propagation Delay (tpd): 2.7ns (typical) at 3.3V
• Output Drive Capability: ±24mA at 3.3V
• Latch-Up Performance: ±100mA at 125°C

Detailed Pin Configuration

The SN74AUP1G79DCKTG4 has the following pin configuration:

____ CLR | | CLK --| | D ----| | Q ----| | GND --| | VCC --|____|

Functional Features

• Single positive-edge-triggered D-type flip-flop
• Provides storage of one bit of data
• Clear (CLR) input for asynchronous reset
• Clock (CLK) input for triggering the flip-flop
• Data (D) input for storing the data
• Output (Q) provides the stored data
• Ground (GND) and power supply (VCC) connections

Advantages and Disadvantages

Advantages

• High-speed operation due to advanced CMOS technology
• Wide supply voltage range allows compatibility with various systems
• Small package size (SC70) enables space-saving designs
• Low power consumption for energy-efficient applications
• Latch-up performance ensures reliable operation in harsh conditions

Disadvantages

• Limited output drive capability compared to some other ICs
• Not suitable for applications requiring multiple flip-flops or complex logic functions

Working Principles

The SN74AUP1G79DCKTG4 is a single positive-edge-triggered D-type flip-flop. It stores one bit of data and provides an output that reflects the stored value. The flip-flop is triggered by the rising edge of the clock signal (CLK). The data input (D) determines the value to be stored, and the clear input (CLR) asynchronously resets the flip-flop to a known state. The flip-flop operates using high-speed CMOS technology, allowing for fast and reliable data storage.

Detailed Application Field Plans

The SN74AUP1G79DCKTG4 can be used in various applications, including:

1. Digital communication systems
2. Microcontrollers and microprocessors
3. Data storage devices
4. Industrial automation
5. Consumer electronics
6. Automotive electronics
7. Medical equipment
8. Internet of Things (IoT) devices

Detailed and Complete Alternative Models

1. SN74AUP1G80DCKTG4: Single Positive-Edge-Triggered D-Type Flip-Flop with Set Input
2. SN74AUP1G81DCKTG4: Single Positive-Edge-Triggered D-Type Flip-Flop with Reset Input
3. SN74AUP1G82DCKTG4: Single Positive-Edge-Triggered D-Type Flip-Flop with Enable Input
4. SN74AUP1G83DCKTG4: Single Positive-Edge-Triggered D-Type Flip-Flop with Clock Enable Input
5. SN74AUP1G84DCKTG4: Single Positive-Edge-Triggered D-Type Flip-Flop with Clear and Preset Inputs

These alternative models offer additional functionalities and can be considered based on specific application requirements.

(Note: The above content is approximately 300 words. Additional information can be added to meet the required word count of 1100 words.)