Texas Instruments
Bild kan vara representation.
Se specifikationer för produktinformation.
SN74F244DWG4
Visa detalj Datablad

SN74F244DWG4

Product Overview

  • Category: Integrated Circuit (IC)
  • Use: Buffer/Line Driver
  • Characteristics: High-speed, non-inverting, 3-state output
  • Package: SOIC (Small Outline Integrated Circuit)
  • Essence: Logic gate with 8-bit buffer and 3-state outputs
  • Packaging/Quantity: Tape and Reel, 2500 units per reel

Specifications

  • Supply Voltage Range: 4.5V to 5.5V
  • Input Voltage Range: 0V to VCC
  • Output Voltage Range: 0V to VCC
  • Operating Temperature Range: -40°C to +85°C
  • Propagation Delay Time: 6ns (typical)
  • Output Drive Capability: ±24mA
  • Input Capacitance: 3pF (typical)

Detailed Pin Configuration

The SN74F244DWG4 has a 20-pin SOIC package with the following pin configuration:

  1. A1 - Input 1
  2. Y1 - Output 1
  3. A2 - Input 2
  4. Y2 - Output 2
  5. GND - Ground
  6. Y3 - Output 3
  7. A3 - Input 3
  8. Y4 - Output 4
  9. A4 - Input 4
  10. VCC - Power Supply
  11. OE - Output Enable
  12. Y5 - Output 5
  13. A5 - Input 5
  14. Y6 - Output 6
  15. A6 - Input 6
  16. Y7 - Output 7
  17. A7 - Input 7
  18. Y8 - Output 8
  19. A8 - Input 8
  20. GND - Ground

Functional Features

  • Non-inverting buffer with 3-state outputs
  • High-speed operation suitable for bus-oriented applications
  • Output enable (OE) pin allows the device to be put in a high-impedance state
  • Wide supply voltage range for compatibility with various systems
  • Robust output drive capability for driving capacitive loads

Advantages and Disadvantages

Advantages: - High-speed operation makes it suitable for time-critical applications - 3-state outputs allow multiple devices to share a common bus - Wide supply voltage range provides flexibility in different power supply environments - Robust output drive capability ensures reliable signal transmission

Disadvantages: - Limited number of inputs and outputs (8-bit) - Not suitable for applications requiring bidirectional communication

Working Principles

The SN74F244DWG4 is a non-inverting buffer with 3-state outputs. It takes input signals and amplifies them to provide high-speed, non-inverted outputs. The output enable (OE) pin controls whether the outputs are active or in a high-impedance state.

When OE is low, the outputs are enabled and actively driven by the input signals. When OE is high, the outputs are in a high-impedance state, allowing other devices to drive the bus without interference.

The device operates within a specified supply voltage range and can drive capacitive loads with its robust output drive capability.

Detailed Application Field Plans

The SN74F244DWG4 is commonly used in various applications, including:

  1. Data communication systems
  2. Microprocessor-based systems
  3. Industrial automation
  4. Automotive electronics
  5. Networking equipment
  6. Memory interfacing
  7. Bus-oriented architectures

Its high-speed operation and 3-state outputs make it suitable for applications where multiple devices need to share a common bus.

Detailed and Complete Alternative Models

Some alternative models that offer similar functionality to the SN74F244DWG4 include:

  1. SN74LS244: Low-power Schottky version with similar pin configuration and characteristics.
  2. SN74HC244: High-speed CMOS version with improved power consumption and compatibility.
  3. SN74ACT244: Advanced CMOS version with increased speed and lower power consumption.

These alternative models can be considered based on specific application requirements and system constraints.

Word count: 520 words

Lista 10 Vanliga frågor och svar relaterade till tillämpningen av SN74F244DWG4 i tekniska lösningar

Sure! Here are 10 common questions and answers related to the application of SN74F244DWG4 in technical solutions:

  1. Q: What is SN74F244DWG4? A: SN74F244DWG4 is a type of octal buffer and line driver integrated circuit (IC) manufactured by Texas Instruments.

  2. Q: What is the purpose of SN74F244DWG4? A: SN74F244DWG4 is used to provide buffering and signal amplification for digital signals in various electronic circuits.

  3. Q: What is the voltage supply range for SN74F244DWG4? A: The voltage supply range for SN74F244DWG4 is typically between 4.5V and 5.5V.

  4. Q: How many channels does SN74F244DWG4 have? A: SN74F244DWG4 has 8 channels, which means it can handle 8 separate input/output lines.

  5. Q: What is the maximum output current of SN74F244DWG4? A: The maximum output current of SN74F244DWG4 is typically around 15mA.

  6. Q: Can SN74F244DWG4 be used with both TTL and CMOS logic levels? A: Yes, SN74F244DWG4 is compatible with both TTL and CMOS logic levels, making it versatile for different applications.

  7. Q: Does SN74F244DWG4 have any built-in protection features? A: Yes, SN74F244DWG4 has built-in diode clamps on its inputs to protect against electrostatic discharge (ESD).

  8. Q: What is the operating temperature range for SN74F244DWG4? A: The operating temperature range for SN74F244DWG4 is typically between -40°C and 85°C.

  9. Q: Can SN74F244DWG4 be used in high-speed applications? A: Yes, SN74F244DWG4 is designed to operate at high speeds and can handle frequencies up to several hundred megahertz.

  10. Q: What are some common applications of SN74F244DWG4? A: SN74F244DWG4 is commonly used in data communication systems, memory interfaces, bus drivers, and other digital logic circuits.

Please note that the answers provided here are general and may vary depending on specific datasheet specifications and application requirements.