Texas Instruments
Bild kan vara representation.
Se specifikationer för produktinformation.
SN74HC4852PWRG4
Visa detalj Datablad

SN74HC4852PWRG4

Product Overview

Category

SN74HC4852PWRG4 belongs to the category of integrated circuits (ICs).

Use

This product is commonly used in electronic devices for signal routing and switching applications.

Characteristics

  • High-speed CMOS technology
  • Low power consumption
  • Wide operating voltage range
  • High noise immunity
  • Multiple input/output channels

Package

SN74HC4852PWRG4 is available in a small-sized TSSOP package, which stands for Thin Shrink Small Outline Package.

Essence

The essence of SN74HC4852PWRG4 lies in its ability to efficiently route and switch signals within electronic circuits.

Packaging/Quantity

This product is typically sold in reels or tubes, with each reel/tube containing a specific quantity of SN74HC4852PWRG4 ICs. The exact quantity may vary depending on the supplier.

Specifications

  • Supply Voltage: 2V to 6V
  • Input Voltage: 0V to VCC
  • Operating Temperature Range: -40°C to +85°C
  • On-State Resistance: 70Ω (typical)
  • On-State Switching Time: 15ns (typical)
  • Number of Channels: 4

Detailed Pin Configuration

  1. IN1 - Input pin for channel 1
  2. OUT1 - Output pin for channel 1
  3. IN2 - Input pin for channel 2
  4. OUT2 - Output pin for channel 2
  5. IN3 - Input pin for channel 3
  6. OUT3 - Output pin for channel 3
  7. IN4 - Input pin for channel 4
  8. OUT4 - Output pin for channel 4
  9. GND - Ground pin
  10. VCC - Power supply pin

Functional Features

  • Bidirectional signal routing
  • Low ON-state resistance for minimal signal attenuation
  • High OFF-state isolation for reduced cross-talk
  • Independent control of each channel
  • Compatibility with various logic families

Advantages and Disadvantages

Advantages

  • Versatile and flexible signal routing capabilities
  • Low power consumption
  • Wide operating voltage range allows compatibility with different systems
  • High noise immunity ensures reliable signal transmission
  • Compact package size saves board space

Disadvantages

  • Limited number of channels (4 in this case)
  • Higher cost compared to simpler analog switches

Working Principles

SN74HC4852PWRG4 operates based on the principles of CMOS technology. It utilizes a combination of MOSFET transistors to control the flow of signals between input and output channels. When a specific channel is selected, the corresponding MOSFETs are turned ON, allowing the signal to pass through. The other channels remain in the OFF state, ensuring isolation between them.

Detailed Application Field Plans

SN74HC4852PWRG4 finds applications in various electronic systems, including but not limited to: - Audio/video signal routing in multimedia devices - Data multiplexing in communication systems - Analog/digital signal switching in test and measurement equipment - Signal selection in industrial control systems - Matrix switching in video surveillance systems

Detailed and Complete Alternative Models

  1. CD4052BE: Similar 4-channel analog switch IC from Texas Instruments
  2. MAX4544EKA+: 4-channel precision analog switch from Maxim Integrated
  3. ADG1414YRUZ: 4-channel CMOS analog multiplexer from Analog Devices
  4. MC14053BCP: Triple 2-channel analog multiplexer/demultiplexer from ON Semiconductor

These alternative models offer similar functionality and can be considered as substitutes for SN74HC4852PWRG4 depending on specific requirements and availability.

Word count: 526 words

Lista 10 Vanliga frågor och svar relaterade till tillämpningen av SN74HC4852PWRG4 i tekniska lösningar

Sure! Here are 10 common questions and answers related to the application of SN74HC4852PWRG4:

  1. Q: What is SN74HC4852PWRG4? A: SN74HC4852PWRG4 is a high-speed CMOS analog multiplexer/demultiplexer IC that allows multiple analog signals to be routed to different destinations.

  2. Q: What is the voltage range supported by SN74HC4852PWRG4? A: SN74HC4852PWRG4 supports a wide voltage range from 2V to 12V.

  3. Q: How many channels does SN74HC4852PWRG4 have? A: SN74HC4852PWRG4 has 8 channels, which means it can handle up to 8 different analog signals.

  4. Q: Can SN74HC4852PWRG4 be used for bidirectional signal routing? A: Yes, SN74HC4852PWRG4 supports bidirectional signal routing, allowing signals to be transmitted in both directions.

  5. Q: What is the maximum frequency supported by SN74HC4852PWRG4? A: SN74HC4852PWRG4 can handle frequencies up to 100 MHz, making it suitable for high-speed applications.

  6. Q: Is SN74HC4852PWRG4 compatible with TTL logic levels? A: Yes, SN74HC4852PWRG4 is fully compatible with TTL logic levels, making it easy to integrate into existing systems.

  7. Q: Can SN74HC4852PWRG4 be used in battery-powered applications? A: Yes, SN74HC4852PWRG4 has low power consumption and can be used in battery-powered applications.

  8. Q: What is the on-resistance of SN74HC4852PWRG4? A: The on-resistance of SN74HC4852PWRG4 is typically around 70 ohms, ensuring minimal signal degradation.

  9. Q: Does SN74HC4852PWRG4 have built-in ESD protection? A: Yes, SN74HC4852PWRG4 has built-in ESD protection, safeguarding against electrostatic discharge.

  10. Q: Can SN74HC4852PWRG4 be cascaded to increase the number of channels? A: Yes, multiple SN74HC4852PWRG4 ICs can be cascaded together to increase the number of channels and accommodate more signals.

Please note that these answers are general and may vary depending on specific datasheet specifications and application requirements.