Texas Instruments
Bild kan vara representation.
Se specifikationer för produktinformation.
TL431IDBZRG4
Visa detalj Datablad

TL431IDBZRG4

Product Overview

Category: Integrated Circuits (ICs)

Use: Voltage References

Characteristics: - Adjustable Precision Shunt Regulator - Programmable Output Voltage - Low Dynamic Output Impedance - Wide Operating Current Range - High Initial Accuracy - Fast Turn-On Response - Low Temperature Drift - Low Output Noise

Package: SOT-23 (Small Outline Transistor 23)

Essence: The TL431IDBZRG4 is a precision shunt regulator that provides a stable reference voltage. It is commonly used in various electronic circuits to maintain a constant voltage level.

Packaging/Quantity: The TL431IDBZRG4 is typically sold in reels, with 3000 units per reel.

Specifications

  • Reference Voltage: 2.495V to 36V
  • Operating Current Range: 1mA to 100mA
  • Temperature Range: -40°C to +85°C
  • Output Voltage Tolerance: ±1%
  • Dynamic Output Impedance: 0.22Ω
  • Quiescent Current: 1.0mA

Detailed Pin Configuration

The TL431IDBZRG4 has three pins:

  1. Anode (A): Connected to the positive supply voltage.
  2. Cathode (K): Connected to the load or ground.
  3. Reference (R): Provides the regulated output voltage.

Functional Features

  • Adjustable Output Voltage: The TL431IDBZRG4 allows for precise adjustment of the output voltage according to the application requirements.
  • Voltage Reference: It provides a stable reference voltage that can be used as a comparison point in various circuits.
  • Shunt Regulation: The device regulates the voltage by shunting excess current to maintain a constant output voltage.
  • Fast Response: The TL431IDBZRG4 has a fast turn-on response time, making it suitable for applications requiring quick voltage stabilization.
  • Low Temperature Drift: It exhibits low temperature drift, ensuring stable performance across a wide temperature range.

Advantages and Disadvantages

Advantages: - High precision and accuracy - Wide operating current range - Low output noise - Fast response time - Adjustable output voltage

Disadvantages: - Requires an external resistor network for precise voltage adjustment - Limited maximum output current capability

Working Principles

The TL431IDBZRG4 operates based on the principle of shunt regulation. It compares the reference voltage at the Reference (R) pin with the voltage at the Cathode (K) pin. By adjusting the current flowing through the device, it maintains a constant voltage at the Cathode (K) pin.

Detailed Application Field Plans

The TL431IDBZRG4 is widely used in various electronic circuits, including but not limited to:

  1. Voltage regulators
  2. Switching power supplies
  3. Battery chargers
  4. Audio amplifiers
  5. LED drivers
  6. Overvoltage protection circuits

Detailed and Complete Alternative Models

Some alternative models that can be considered as alternatives to the TL431IDBZRG4 are:

  1. LM4040CIZ-4.1/NOPB
  2. LT1009CZ#PBF
  3. MAX6126AASA25+
  4. REF3030AIDBZT
  5. TS431IZT

These models offer similar functionality and can be used as substitutes depending on the specific requirements of the application.

Note: This entry contains 439 words. Additional content is required to reach the desired word count of 1100 words.

Lista 10 Vanliga frågor och svar relaterade till tillämpningen av TL431IDBZRG4 i tekniska lösningar

Sure! Here are 10 common questions and answers related to the application of TL431IDBZRG4 in technical solutions:

  1. Q: What is TL431IDBZRG4? A: TL431IDBZRG4 is a programmable precision voltage reference that can be used in various applications such as voltage regulation, feedback control, and precision measurement.

  2. Q: What is the operating voltage range of TL431IDBZRG4? A: The operating voltage range of TL431IDBZRG4 is typically from 2.5V to 36V.

  3. Q: How does TL431IDBZRG4 work as a voltage reference? A: TL431IDBZRG4 compares the input voltage with an internal reference voltage and adjusts its output accordingly to maintain a stable reference voltage.

  4. Q: Can TL431IDBZRG4 be used for voltage regulation? A: Yes, TL431IDBZRG4 can be used as a shunt regulator to regulate the output voltage by controlling the current flowing through it.

  5. Q: What is the typical accuracy of TL431IDBZRG4? A: The typical accuracy of TL431IDBZRG4 is ±1%.

  6. Q: How can TL431IDBZRG4 be used for feedback control? A: TL431IDBZRG4 can be used in feedback loops to compare the output voltage with a desired reference voltage and adjust the system accordingly.

  7. Q: Can TL431IDBZRG4 be used in battery charging circuits? A: Yes, TL431IDBZRG4 can be used in battery charging circuits to regulate the charging voltage and current.

  8. Q: Is TL431IDBZRG4 suitable for precision measurement applications? A: Yes, TL431IDBZRG4 can be used in precision measurement circuits to provide a stable and accurate reference voltage.

  9. Q: What is the maximum current that TL431IDBZRG4 can handle? A: TL431IDBZRG4 can handle a maximum cathode current of 100mA.

  10. Q: Are there any specific precautions to consider when using TL431IDBZRG4? A: Yes, some precautions include ensuring proper heat dissipation, avoiding excessive input voltage, and providing adequate decoupling capacitors for stability.

Please note that these answers are general and may vary depending on specific application requirements.