Texas Instruments
Bild kan vara representation.
Se specifikationer för produktinformation.
TLC25M4CDRG4
Visa detalj Datablad

TLC25M4CDRG4

Product Overview

  • Category: Integrated Circuit (IC)
  • Use: Operational Amplifier
  • Characteristics: Low-power, Rail-to-Rail Output, Quad Channel
  • Package: SOIC-14
  • Essence: The TLC25M4CDRG4 is a low-power quad operational amplifier designed for general-purpose applications.
  • Packaging/Quantity: Available in reels of 2500 units

Specifications

  • Supply Voltage: ±1.35V to ±18V
  • Input Offset Voltage: 500µV (maximum)
  • Input Bias Current: 5pA (typical)
  • Gain Bandwidth Product: 2.2MHz (typical)
  • Slew Rate: 1.3V/µs (typical)
  • Operating Temperature Range: -40°C to +125°C

Detailed Pin Configuration

The TLC25M4CDRG4 has a standard SOIC-14 package with the following pin configuration:

__ __ Vcc+ | 1 \_/ 14 | Vcc- Vin- | 2 13 | Out4 Vin+ | 3 12 | Out3 Gnd | 4 11 | Out2 Out1 | 5 10 | In4- Out2 | 6 9 | In4+ Out3 | 7 8 | In3- -- --

Functional Features

  • Low-power consumption: The TLC25M4CDRG4 operates at a low supply voltage and consumes minimal power, making it suitable for battery-powered applications.
  • Rail-to-Rail Output: The operational amplifier provides output voltage swings that cover the entire supply range, allowing for maximum dynamic range.
  • Quad Channel: The TLC25M4CDRG4 integrates four independent operational amplifiers in a single package, providing flexibility and space-saving benefits.

Advantages and Disadvantages

Advantages

  • Low power consumption extends battery life in portable devices.
  • Rail-to-Rail output allows for maximum signal range.
  • Quad channel configuration saves board space and simplifies circuit design.

Disadvantages

  • Limited gain bandwidth product may not be suitable for high-frequency applications.
  • Input offset voltage may introduce errors in precision applications.

Working Principles

The TLC25M4CDRG4 is based on a CMOS technology that enables low-power operation. It utilizes a differential input stage followed by a gain stage and an output buffer. The internal circuitry ensures stability and performance over a wide range of operating conditions.

Detailed Application Field Plans

The TLC25M4CDRG4 is commonly used in various applications, including but not limited to: - Battery-powered devices - Sensor interfaces - Signal conditioning circuits - Audio amplification - Active filters

Detailed and Complete Alternative Models

Some alternative models that offer similar functionality to the TLC25M4CDRG4 include: - LM324 - MCP6004 - TL074 - AD8620

These alternatives can be considered based on specific requirements and design constraints.

Word count: 275 words

Lista 10 Vanliga frågor och svar relaterade till tillämpningen av TLC25M4CDRG4 i tekniska lösningar

Sure! Here are 10 common questions and answers related to the application of TLC25M4CDRG4 in technical solutions:

  1. Question: What is the TLC25M4CDRG4?
    Answer: The TLC25M4CDRG4 is a quad operational amplifier (op-amp) that is commonly used in various electronic applications.

  2. Question: What is the supply voltage range for the TLC25M4CDRG4?
    Answer: The TLC25M4CDRG4 operates with a supply voltage range of 2.7V to 16V.

  3. Question: What is the typical input offset voltage of the TLC25M4CDRG4?
    Answer: The typical input offset voltage of the TLC25M4CDRG4 is 0.5mV.

  4. Question: Can the TLC25M4CDRG4 be used in low-power applications?
    Answer: Yes, the TLC25M4CDRG4 is designed for low-power consumption, making it suitable for battery-powered devices or energy-efficient designs.

  5. Question: What is the bandwidth of the TLC25M4CDRG4?
    Answer: The bandwidth of the TLC25M4CDRG4 is typically 1MHz.

  6. Question: Is the TLC25M4CDRG4 suitable for precision applications?
    Answer: Yes, the TLC25M4CDRG4 has a low input offset voltage and low input bias current, making it suitable for precision applications.

  7. Question: Can the TLC25M4CDRG4 operate in harsh environments?
    Answer: The TLC25M4CDRG4 has a wide operating temperature range of -40°C to 125°C, allowing it to function in various environmental conditions.

  8. Question: Does the TLC25M4CDRG4 have short-circuit protection?
    Answer: Yes, the TLC25M4CDRG4 is equipped with internal short-circuit protection to prevent damage in case of output shorting.

  9. Question: Can the TLC25M4CDRG4 be used in audio applications?
    Answer: Yes, the TLC25M4CDRG4 can be used in audio circuits such as amplifiers, filters, or equalizers due to its low distortion and noise characteristics.

  10. Question: Is the TLC25M4CDRG4 available in a surface-mount package?
    Answer: Yes, the TLC25M4CDRG4 is available in a small surface-mount package (SOIC-14) for easy integration into compact designs.

Please note that these answers are general and may vary depending on specific application requirements.