Texas Instruments
Bild kan vara representation.
Se specifikationer för produktinformation.
TLV2373IDGS
Visa detalj Datablad

TLV2373IDGS

Product Overview

  • Category: Integrated Circuit (IC)
  • Use: Operational Amplifier
  • Characteristics: Low-voltage, Rail-to-Rail Output, General Purpose
  • Package: MSOP-10
  • Essence: The TLV2373IDGS is a low-voltage operational amplifier designed for general-purpose applications. It offers rail-to-rail output swing and operates from a single supply voltage as low as 2.7V.
  • Packaging/Quantity: The TLV2373IDGS is available in a MSOP-10 package and is typically sold in reels of 2500 units.

Specifications

  • Supply Voltage Range: 2.7V to 5.5V
  • Input Offset Voltage: ±1mV (maximum)
  • Input Bias Current: ±1pA (typical)
  • Gain Bandwidth Product: 4MHz (typical)
  • Slew Rate: 2.3V/µs (typical)
  • Operating Temperature Range: -40°C to 125°C

Detailed Pin Configuration

The TLV2373IDGS has the following pin configuration:

___________ Vcc | 1 8 | Vout Vin-| 2 7 | NC Vin+| 3 6 | NC Gnd | 4 5 | NC ‾‾‾‾‾‾‾‾‾‾‾

Functional Features

  • Low-voltage operation: The TLV2373IDGS can operate from a single supply voltage as low as 2.7V, making it suitable for battery-powered applications.
  • Rail-to-rail output swing: The amplifier provides an output swing that extends to the supply rails, allowing for maximum utilization of the available dynamic range.
  • General-purpose design: The TLV2373IDGS is designed for a wide range of applications, offering versatility and flexibility in various circuit designs.

Advantages and Disadvantages

Advantages: - Low-voltage operation enables use in battery-powered devices. - Rail-to-rail output swing allows for maximum signal range. - General-purpose design offers versatility.

Disadvantages: - Limited bandwidth compared to specialized amplifiers. - Higher input offset voltage compared to precision amplifiers.

Working Principles

The TLV2373IDGS is based on operational amplifier principles. It utilizes differential inputs to amplify the voltage difference between the Vin+ and Vin- pins. The amplified output voltage is then provided at the Vout pin. The rail-to-rail output swing ensures that the output voltage can reach the full range between the supply voltages.

Detailed Application Field Plans

The TLV2373IDGS can be used in various applications, including but not limited to: - Battery-powered portable devices - Sensor signal conditioning - Audio amplification - Active filters - Voltage and current measurement circuits

Detailed and Complete Alternative Models

Some alternative models to the TLV2373IDGS include: - TLV2372: Dual version of the TLV2373IDGS - TLV2374: Quad version of the TLV2373IDGS - MCP6002: Low-power operational amplifier with similar specifications - LMV321: General-purpose operational amplifier with rail-to-rail output

These alternative models offer similar functionality and can be considered as substitutes depending on specific requirements.

Word count: 346 words

Lista 10 Vanliga frågor och svar relaterade till tillämpningen av TLV2373IDGS i tekniska lösningar

Sure! Here are 10 common questions and answers related to the application of TLV2373IDGS in technical solutions:

  1. Q: What is TLV2373IDGS? A: TLV2373IDGS is a low-power, rail-to-rail input/output operational amplifier (op-amp) designed for various applications.

  2. Q: What is the supply voltage range for TLV2373IDGS? A: The supply voltage range for TLV2373IDGS is typically between 2.7V and 5.5V.

  3. Q: What is the input voltage range of TLV2373IDGS? A: The input voltage range of TLV2373IDGS extends from the negative supply voltage (V-) to the positive supply voltage (V+).

  4. Q: Can TLV2373IDGS operate with a single power supply? A: Yes, TLV2373IDGS can operate with a single power supply as long as it falls within the specified supply voltage range.

  5. Q: What is the typical gain bandwidth product of TLV2373IDGS? A: The typical gain bandwidth product of TLV2373IDGS is around 1 MHz.

  6. Q: Is TLV2373IDGS suitable for low-power applications? A: Yes, TLV2373IDGS is designed for low-power applications, making it suitable for battery-powered devices.

  7. Q: Can TLV2373IDGS drive capacitive loads? A: Yes, TLV2373IDGS has a high output current capability, allowing it to drive capacitive loads up to a certain limit.

  8. Q: Does TLV2373IDGS have built-in protection features? A: Yes, TLV2373IDGS has built-in features like thermal shutdown and short-circuit protection to ensure safe operation.

  9. Q: What is the input offset voltage of TLV2373IDGS? A: The input offset voltage of TLV2373IDGS is typically very low, ensuring accurate signal amplification.

  10. Q: Can TLV2373IDGS be used in precision applications? A: Yes, TLV2373IDGS offers low input offset voltage and low noise characteristics, making it suitable for precision applications.

Please note that these answers are general and may vary depending on specific datasheet specifications and application requirements.