TLV2461AID
Product Overview
- Category: Operational Amplifier (Op-Amp)
- Use: TLV2461AID is a low-power, rail-to-rail input/output operational amplifier designed for general-purpose applications.
- Characteristics: It offers a wide supply voltage range, low input bias current, and low quiescent current, making it suitable for battery-powered devices. The device also provides high output current drive capability and excellent AC performance.
- Package: TLV2461AID comes in an 8-pin SOIC package.
- Essence: TLV2461AID is a versatile operational amplifier that combines low power consumption with high performance, making it ideal for various applications.
- Packaging/Quantity: TLV2461AID is typically available in reels of 2500 units.
Specifications
- Supply Voltage Range: 2.7V to 6V
- Input Offset Voltage: ±1mV (maximum)
- Input Bias Current: 1pA (typical)
- Quiescent Current: 900µA (typical)
- Gain Bandwidth Product: 1MHz (typical)
- Slew Rate: 0.5V/µs (typical)
- Output Current: 40mA (typical)
Pin Configuration
The TLV2461AID features the following pin configuration:
___________
OUT | 1 8 | VCC+
IN- | 2 7 | IN+
IN+ | 3 6 | VCC-
GND | 4 5 | NC
‾‾‾‾‾‾‾‾‾‾‾
Functional Features
- Low power consumption
- Rail-to-rail input and output operation
- Wide supply voltage range
- High output current drive capability
- Excellent AC performance
Advantages and Disadvantages
Advantages: - Low input bias current - Suitable for battery-powered devices - Versatile and suitable for general-purpose applications - High output current drive capability
Disadvantages: - Limited gain bandwidth product compared to some specialized op-amps - Relatively low slew rate
Working Principles
The TLV2461AID operates as a voltage amplifier, amplifying the difference between its two input terminals. It utilizes a differential input stage followed by a gain stage and an output buffer. The rail-to-rail input/output capability allows it to handle signals close to the supply rails.
Detailed Application Field Plans
The TLV2461AID can be used in various applications, including but not limited to: - Portable audio devices - Sensor signal conditioning - Battery-powered instrumentation - Active filters - Signal amplification in low-power systems
Alternative Models
Some alternative models that offer similar functionality to TLV2461AID include: - LM358 - MCP6001 - AD8605 - MAX44246
These alternatives should be evaluated based on specific application requirements and desired performance characteristics.
Word count: 275 words
Lista 10 Vanliga frågor och svar relaterade till tillämpningen av TLV2461AID i tekniska lösningar
Sure! Here are 10 common questions and answers related to the application of TLV2461AID in technical solutions:
Q1: What is TLV2461AID? A1: TLV2461AID is a low-power, rail-to-rail input/output operational amplifier (op-amp) manufactured by Texas Instruments.
Q2: What is the supply voltage range for TLV2461AID? A2: The supply voltage range for TLV2461AID is typically between 2.7V and 6V.
Q3: What is the input offset voltage of TLV2461AID? A3: The input offset voltage of TLV2461AID is typically around 1mV.
Q4: What is the input bias current of TLV2461AID? A4: The input bias current of TLV2461AID is typically around 1pA.
Q5: Can TLV2461AID operate with a single power supply? A5: Yes, TLV2461AID can operate with a single power supply as it has rail-to-rail input/output capability.
Q6: What is the bandwidth of TLV2461AID? A6: The bandwidth of TLV2461AID is typically around 3MHz.
Q7: Is TLV2461AID suitable for low-power applications? A7: Yes, TLV2461AID is designed for low-power applications, consuming very little power.
Q8: Can TLV2461AID be used in precision measurement circuits? A8: Yes, TLV2461AID can be used in precision measurement circuits due to its low input offset voltage and low input bias current.
Q9: Does TLV2461AID have built-in protection features? A9: Yes, TLV2461AID has built-in features like short-circuit protection and thermal shutdown to protect the device from damage.
Q10: What are some typical applications of TLV2461AID? A10: TLV2461AID is commonly used in battery-powered devices, portable instrumentation, sensor interfaces, and audio amplification circuits.
Please note that the answers provided here are general and may vary depending on specific datasheet specifications and application requirements.