Texas Instruments
Bild kan vara representation.
Se specifikationer för produktinformation.
TLV333IDR
Visa detalj Datablad

TLV333IDR

Product Overview

  • Category: Integrated Circuit
  • Use: Amplifier
  • Characteristics: Low Voltage, Rail-to-Rail Output, Single-Supply
  • Package: SOIC (Small Outline Integrated Circuit)
  • Essence: TLV333IDR is a low voltage rail-to-rail output amplifier designed for single-supply applications.
  • Packaging/Quantity: Available in reels of 2500 units.

Specifications

  • Supply Voltage Range: 1.8V to 5.5V
  • Input Offset Voltage: ±1mV (maximum)
  • Gain Bandwidth Product: 2.7MHz
  • Slew Rate: 1.6V/µs
  • Input Bias Current: ±1pA (typical)
  • Operating Temperature Range: -40°C to +125°C

Pin Configuration

The TLV333IDR package consists of 8 pins:

  1. V- (Negative Power Supply)
  2. IN- (Inverting Input)
  3. IN+ (Non-Inverting Input)
  4. V+ (Positive Power Supply)
  5. OUT (Amplifier Output)
  6. NC (No Connection)
  7. NC (No Connection)
  8. GND (Ground)

Functional Features

  • Low voltage operation allows for compatibility with various power supply systems.
  • Rail-to-rail output enables the amplifier to swing close to both supply rails.
  • Single-supply design simplifies circuitry and reduces cost.
  • Low input bias current minimizes loading on signal sources.

Advantages and Disadvantages

Advantages

  • Wide supply voltage range allows for flexibility in system design.
  • Rail-to-rail output provides maximum dynamic range.
  • Low input offset voltage ensures accurate amplification.
  • Low power consumption extends battery life in portable applications.

Disadvantages

  • Limited gain bandwidth product may restrict high-frequency applications.
  • Slew rate may limit the amplifier's ability to respond quickly to rapid input changes.

Working Principles

The TLV333IDR is a voltage amplifier that operates by amplifying the difference between the non-inverting (IN+) and inverting (IN-) input voltages. It utilizes a differential input stage followed by a gain stage and an output buffer. The rail-to-rail output allows the amplifier to provide maximum output swing even with low supply voltages.

Detailed Application Field Plans

The TLV333IDR is commonly used in various applications, including:

  1. Portable audio devices
  2. Battery-powered instrumentation
  3. Sensor signal conditioning
  4. Active filters
  5. Signal amplification in communication systems

Alternative Models

Here are some alternative models that can be considered as substitutes for the TLV333IDR:

  1. TLV2372IDR - Dual Rail-to-Rail Output Amplifier
  2. TLV2462IDR - Dual Low Noise Rail-to-Rail Output Amplifier
  3. TLV2712IDR - Dual Precision Rail-to-Rail Output Amplifier

These alternatives offer similar functionality and characteristics, providing options for different design requirements.

In conclusion, the TLV333IDR is a low voltage rail-to-rail output amplifier suitable for single-supply applications. Its wide supply voltage range, rail-to-rail output, and low power consumption make it a versatile choice for various electronic systems.

Word Count: 314

Lista 10 Vanliga frågor och svar relaterade till tillämpningen av TLV333IDR i tekniska lösningar

Sure! Here are 10 common questions and answers related to the application of TLV333IDR in technical solutions:

  1. Q: What is TLV333IDR? A: TLV333IDR is a low-power, rail-to-rail input/output operational amplifier (op-amp) manufactured by Texas Instruments.

  2. Q: What is the supply voltage range for TLV333IDR? A: The supply voltage range for TLV333IDR is typically between 2.7V and 5.5V.

  3. Q: What is the typical input offset voltage of TLV333IDR? A: The typical input offset voltage of TLV333IDR is around 1mV.

  4. Q: Can TLV333IDR operate in single-supply applications? A: Yes, TLV333IDR can operate in both single-supply and split-supply applications.

  5. Q: What is the maximum output current of TLV333IDR? A: The maximum output current of TLV333IDR is typically around 40mA.

  6. Q: Is TLV333IDR suitable for low-power applications? A: Yes, TLV333IDR is designed for low-power applications, consuming very little power.

  7. Q: What is the bandwidth of TLV333IDR? A: The bandwidth of TLV333IDR is typically around 1MHz.

  8. Q: Can TLV333IDR be used in temperature-sensitive applications? A: Yes, TLV333IDR has a wide operating temperature range of -40°C to +125°C, making it suitable for temperature-sensitive applications.

  9. Q: Does TLV333IDR have built-in protection features? A: Yes, TLV333IDR has built-in features like short-circuit protection and thermal shutdown to protect the device from damage.

  10. Q: What are some common applications of TLV333IDR? A: TLV333IDR is commonly used in battery-powered devices, sensor interfaces, portable instrumentation, and other low-power applications.

Please note that the answers provided here are general and may vary depending on specific datasheet specifications and application requirements.