Vishay Semiconductor Diodes Division
Bild kan vara representation.
Se specifikationer för produktinformation.
2KBP10ML-5/22

2KBP10ML-5/22

Product Category: Rectifier Diode

Basic Information Overview: - Category: Electronic Component - Use: Rectification of AC to DC in electronic circuits - Characteristics: High current capability, low forward voltage drop - Package: 2-pin through-hole package - Essence: Efficient rectification of alternating current - Packaging/Quantity: Typically packaged in reels or tubes, quantity varies by manufacturer

Specifications: - Maximum Average Forward Current: 2A - Peak Repetitive Reverse Voltage: 1000V - Forward Voltage Drop: 1.1V at 2A - Operating Temperature Range: -65°C to +175°C

Detailed Pin Configuration: - Pin 1: Anode - Pin 2: Cathode

Functional Features: - Efficiently converts AC to DC - Low power loss - Fast switching capability

Advantages and Disadvantages: - Advantages: - High current capability - Low forward voltage drop - Fast switching speed - Disadvantages: - Higher cost compared to standard diodes - Sensitive to reverse voltage spikes

Working Principles: The 2KBP10ML-5/22 operates on the principle of rectification, allowing the flow of current in only one direction, effectively converting alternating current to direct current.

Detailed Application Field Plans: - Power supplies - Battery chargers - Motor drives - Inverters

Detailed and Complete Alternative Models: - 1N4007 - 1N5408 - 6A10

This comprehensive entry provides a detailed overview of the 2KBP10ML-5/22 rectifier diode, including its specifications, pin configuration, functional features, advantages and disadvantages, working principles, application field plans, and alternative models.

Lista 10 Vanliga frågor och svar relaterade till tillämpningen av 2KBP10ML-5/22 i tekniska lösningar

  1. What is 2KBP10ML-5/22?

    • 2KBP10ML-5/22 is a bridge rectifier diode module commonly used in power supply and rectification applications.

  2. What is the maximum voltage and current rating of 2KBP10ML-5/22?

    • The maximum voltage rating is 1000V and the maximum current rating is 2A.

  3. What are the typical applications of 2KBP10ML-5/22?

    • It is commonly used in AC to DC conversion circuits, power supplies, battery chargers, and motor drives.

  4. What is the package type of 2KBP10ML-5/22?

    • It is available in a standard 4-pin single in-line package (SIP).

  5. What are the key features of 2KBP10ML-5/22?

    • Some key features include high surge current capability, low forward voltage drop, and high isolation voltage.

  6. What are the recommended operating conditions for 2KBP10ML-5/22?

    • It is typically operated within a temperature range of -40°C to 150°C and should be mounted on a suitable heatsink for efficient heat dissipation.

  7. Can 2KBP10ML-5/22 be used in high-frequency applications?

    • Yes, it can be used in moderate to high-frequency applications due to its fast recovery time and low reverse recovery charge.

  8. Is 2KBP10ML-5/22 suitable for automotive applications?

    • Yes, it is suitable for automotive applications where reliable rectification and power conversion are required.

  9. Are there any specific precautions to consider when using 2KBP10ML-5/22?

    • It is important to observe proper polarity during installation and ensure adequate insulation to prevent electrical hazards.

  10. Where can I find detailed technical specifications and application notes for 2KBP10ML-5/22?

    • Detailed technical specifications and application notes can be found in the datasheet provided by the manufacturer or distributor of the component.