BZX85B24-TAP
Product Overview
Category
The BZX85B24-TAP belongs to the category of Zener diodes.
Use
It is commonly used for voltage regulation and protection in electronic circuits.
Characteristics
- Zener voltage: 24V
- Power dissipation: 1.3W
- Package type: DO-41
- Operating temperature range: -65°C to +200°C
- Packaging: Tape and reel
Package
The BZX85B24-TAP is typically available in a DO-41 package, which is a cylindrical through-hole package.
Essence
This Zener diode is essential for maintaining a stable voltage across a circuit, especially in applications where precise voltage regulation is required.
Packaging/Quantity
The BZX85B24-TAP is usually packaged in reels with a specific quantity per reel, typically 1000 units per reel.
Specifications
- Zener voltage: 24V
- Power dissipation: 1.3W
- Maximum forward voltage: 1.2V
- Reverse current: 5μA
- Temperature coefficient: 5mV/°C
Detailed Pin Configuration
The BZX85B24-TAP has two pins, anode, and cathode, which are identified by the orientation of the diode within the DO-41 package.
Functional Features
- Voltage regulation: The BZX85B24-TAP maintains a constant voltage across the circuit, preventing voltage spikes or fluctuations.
- Overvoltage protection: It provides protection against excessive voltage levels, safeguarding sensitive components in the circuit.
Advantages and Disadvantages
Advantages
- Precise voltage regulation
- High power dissipation capability
- Wide operating temperature range
Disadvantages
- Limited reverse current tolerance
- Sensitive to temperature variations
Working Principles
The BZX85B24-TAP operates based on the Zener effect, where it begins conducting when the voltage across it reaches its specified Zener voltage, effectively regulating the voltage across the circuit.
Detailed Application Field Plans
The BZX85B24-TAP is widely used in various applications, including: - Voltage regulators in power supplies - Overvoltage protection in automotive electronics - Signal clamping in communication circuits
Detailed and Complete Alternative Models
Some alternative models to the BZX85B24-TAP include: - BZX85C24-TAP (Zener voltage: 24V, power dissipation: 1.3W) - BZX85B27-TAP (Zener voltage: 27V, power dissipation: 1.3W) - BZX85C30-TAP (Zener voltage: 30V, power dissipation: 1.3W)
In conclusion, the BZX85B24-TAP Zener diode is a crucial component in electronic circuits, providing precise voltage regulation and overvoltage protection in various applications.
[Word count: 411]
Lista 10 Vanliga frågor och svar relaterade till tillämpningen av BZX85B24-TAP i tekniska lösningar
What is the maximum power dissipation of BZX85B24-TAP?
- The maximum power dissipation of BZX85B24-TAP is 1.3 Watts.
What is the voltage rating of BZX85B24-TAP?
- BZX85B24-TAP has a voltage rating of 24 volts.
What is the forward voltage drop of BZX85B24-TAP?
- The forward voltage drop of BZX85B24-TAP is typically 0.9 volts at a forward current of 20 mA.
What is the operating temperature range of BZX85B24-TAP?
- BZX85B24-TAP has an operating temperature range of -65°C to +175°C.
What is the maximum reverse leakage current of BZX85B24-TAP?
- The maximum reverse leakage current of BZX85B24-TAP is 5 µA at its rated voltage.
Is BZX85B24-TAP RoHS compliant?
- Yes, BZX85B24-TAP is RoHS compliant.
What is the package type of BZX85B24-TAP?
- BZX85B24-TAP comes in a DO-41 package.
Can BZX85B24-TAP be used for voltage regulation?
- Yes, BZX85B24-TAP can be used for voltage regulation and transient voltage suppression.
What are the typical applications of BZX85B24-TAP?
- Typical applications of BZX85B24-TAP include voltage clamping, voltage regulation, and overvoltage protection in various electronic circuits.
Does BZX85B24-TAP require a heat sink for operation?
- BZX85B24-TAP does not typically require a heat sink for normal operation within its specified power dissipation limits. However, a heat sink may be necessary if the device operates close to its maximum power dissipation.