Vishay Semiconductor Diodes Division
Bild kan vara representation.
Se specifikationer för produktinformation.
RS2JHE3/52T
Visa detalj Datablad

RS2JHE3/52T Product Overview

Introduction

The RS2JHE3/52T is a semiconductor product belonging to the category of diodes. It is commonly used in electronic circuits for various applications due to its specific characteristics and performance.

Basic Information Overview

  • Category: Diode
  • Use: Electronic circuitry
  • Characteristics: High efficiency, low forward voltage drop
  • Package: SOD-123
  • Essence: Semiconductor material
  • Packaging/Quantity: Tape & Reel, 3000 units per reel

Specifications

  • Type: Schottky Barrier Diode
  • Voltage Rating: 30V
  • Current Rating: 2A
  • Forward Voltage Drop: 0.45V @ 1A
  • Reverse Leakage Current: 10μA @ 25V

Detailed Pin Configuration

The RS2JHE3/52T follows the standard pin configuration for SOD-123 package: - Pin 1: Anode - Pin 2: Cathode

Functional Features

  • High efficiency due to low forward voltage drop
  • Fast switching speed
  • Low reverse leakage current

Advantages

  • Reduced power loss
  • Enhanced circuit efficiency
  • Suitable for high-frequency applications

Disadvantages

  • Limited voltage and current ratings
  • Sensitivity to overvoltage conditions

Working Principles

The RS2JHE3/52T operates based on the Schottky barrier principle, where the metal-semiconductor junction provides low forward voltage drop and fast switching characteristics.

Detailed Application Field Plans

This diode is widely used in: - Power supply circuits - Voltage clamping circuits - Switching regulators - Reverse polarity protection circuits

Detailed and Complete Alternative Models

  • 1N5819: Similar voltage and current ratings
  • SS24: Higher voltage rating, lower current rating
  • BAT54S: Dual diode configuration

In conclusion, the RS2JHE3/52T diode offers high efficiency and fast switching characteristics, making it suitable for various electronic applications. Its limitations in voltage and current ratings can be addressed by considering alternative models with different specifications.

Word Count: 298

Lista 10 Vanliga frågor och svar relaterade till tillämpningen av RS2JHE3/52T i tekniska lösningar

  1. What is the RS2JHE3/52T component used for in technical solutions?

    • The RS2JHE3/52T is a diode rectifier commonly used for voltage regulation and power supply applications.

  2. What are the key specifications of the RS2JHE3/52T component?

    • The RS2JHE3/52T is a 2A, 600V diode with fast recovery times and low forward voltage drop, making it suitable for high-frequency and high-efficiency applications.

  3. How does the RS2JHE3/52T contribute to improving energy efficiency in technical solutions?

    • The RS2JHE3/52T's low forward voltage drop and fast recovery times help minimize power losses, contributing to improved energy efficiency in various technical solutions.

  4. In what types of circuits or systems is the RS2JHE3/52T commonly integrated?

    • The RS2JHE3/52T is commonly integrated into switch-mode power supplies, voltage regulators, and other power management circuits where efficient rectification and voltage regulation are required.

  5. What are the temperature and voltage operating ranges for the RS2JHE3/52T?

    • The RS2JHE3/52T typically operates within a temperature range of -65°C to +175°C and can handle voltages up to 600V, making it suitable for a wide range of operating conditions.

  6. How does the RS2JHE3/52T perform in high-frequency applications?

    • The RS2JHE3/52T is designed to have fast recovery times, which make it well-suited for high-frequency applications where rapid switching is required.

  7. Can the RS2JHE3/52T be used in automotive electronics applications?

    • Yes, the RS2JHE3/52T is often utilized in automotive electronics for its robustness, temperature tolerance, and reliability in harsh operating environments.

  8. What are the typical packaging options available for the RS2JHE3/52T?

    • The RS2JHE3/52T is commonly available in surface mount packages such as SMA, SMB, and SMC, offering flexibility for different PCB layouts and space constraints.

  9. Are there any recommended application notes or design guidelines for using the RS2JHE3/52T in technical solutions?

    • Yes, the manufacturer provides detailed application notes and design guidelines to assist engineers in effectively integrating the RS2JHE3/52T into their technical solutions.

  10. What are the potential failure modes or considerations when using the RS2JHE3/52T in technical solutions?

    • Common failure modes to consider include overvoltage stress, thermal management, and proper PCB layout to ensure optimal performance and reliability of the RS2JHE3/52T in technical solutions.